{"title":"Accessories for manual shears","description":"To optimize your manual cutting, explore our collection of \u003cstrong\u003ehand shear accessories\u003c\/strong\u003e on Krollit.it. We offer high-quality replacement blades, ergonomic handles, and adjustable guides to ensure precision and ease of use. By choosing our accessories, you can improve the quality of your cuts and achieve professional results. Regardless of material or thickness, our accessories are designed to offer reliable and long-lasting performance. Explore our range and find the perfect accessory for your metalworking needs. Shop on Krollit.it to elevate your work to new levels of precision and efficiency.","products":[{"product_id":"punzone-diam-19-mm-per-pbs-22-ls","title":"Accessory for Bernardo machine tool Punch diameter 19 mm for PBS 22 LS","description":"\u003cp\u003eThe Bernardo 19 mm dia. punch for PBS 22 LS is a machine tool accessory for professional use, available on Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: 19 mm dia. punch for PBS 22 LS\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the 19 mm dia. punch for PBS 22 LS and for what\u003c\/h3\u003e\n\u003cp\u003eUsers who own the compatible machine install the 19 mm dia. punch for PBS 22 LS as an original accessory to extend functionalities or replace worn components.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo 19 mm dia. punch for PBS 22 LS is part of the Bernardo machine tool accessory range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the 19 mm dia. punch for PBS 22 LS for\u003c\/h3\u003e\n\u003cp\u003eThe 19 mm dia. punch for PBS 22 LS is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers who own the compatible machine\u003c\/strong\u003e: original accessory to extend the functionalities of the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshops with specific setup needs\u003c\/strong\u003e: component for particular machining operations or increased precision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility with machines of other brands or models\u003c\/strong\u003e: check machine model and specifications before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine is it compatible with?\u003c\/summary\u003e\n\u003cp\u003eCheck the machine model indicated in the title or description. Krollit only supplies original accessories for the machines in its catalog.\u003c\/p\u003e\n\u003cp\u003eIn case of doubts about compatibility, contact Krollit customer support providing the machine's serial number.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it an original spare part?\u003c\/summary\u003e\n\u003cp\u003eYes, Krollit has been an official Bernardo distributor since 2007 and only supplies original manufacturer accessories.\u003c\/p\u003e\n\u003cp\u003eNon-original accessories can compromise the machine's warranty and safety. It is recommended to always use manufacturer-certified components.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the delivery times?\u003c\/summary\u003e\n\u003cp\u003eShipping 3-5 working days from Krollit warehouse.\u003c\/p\u003e\n\u003cp\u003eFor out-of-stock accessories, procurement times from the manufacturer can be 2-4 weeks. Check availability before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan it be assembled independently?\u003c\/summary\u003e\n\u003cp\u003eFor simple accessories, yes; for components that require adjustments or calibrations, the intervention of a qualified technician is recommended.\u003c\/p\u003e\n\u003cp\u003eKrollit provides original Bernardo technical documentation for correct assembly.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\n\u003cp\u003eYes, manufacturer's warranty according to legal terms. The warranty becomes void if the accessory is installed on incompatible machines.\u003c\/p\u003e\n\u003cp\u003eKeep the invoice as proof of purchase. For warranty claims, contact Krollit customer support.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715450409288,"sku":"06-6141Q","price":52.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Punzone-diam-19-mm-per-PBS-22-LS-extra-big-9362-373.jpg?v=1750288117"},{"product_id":"punzone-diam-20-mm-per-pbs-22-ls","title":"Accessory for Bernardo machine tool Punch diam. 20 mm for PBS 22 LS","description":"\u003cp\u003eBernardo punch diam. 20 mm for PBS 22 LS is a professional machine tool accessory available from Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Punch diam. 20 mm for PBS 22 LS\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the 20 mm diameter punch for PBS 22 LS and for what purpose?\u003c\/h3\u003e\n\u003cp\u003eUsers who own a compatible machine install the 20 mm diameter punch for PBS 22 LS as an original accessory to extend functionalities or replace worn components.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Punch diam. 20 mm for PBS 22 LS is part of Bernardo's range of machine tool accessories, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the 20 mm diameter punch for PBS 22 LS for?\u003c\/h3\u003e\n\u003cp\u003eThe 20 mm diameter punch for PBS 22 LS is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers who own the compatible machine\u003c\/strong\u003e: original accessory to extend the functionalities of the specified machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshops with specific setup needs\u003c\/strong\u003e: component for particular machining operations or increased precision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility with machines of other brands or models\u003c\/strong\u003e: verify machine model and specifications before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine is it compatible with?\u003c\/summary\u003e\n\u003cp\u003eCheck the indicated machine model in the title or description. Krollit only supplies original accessories for the machines in its catalog.\u003c\/p\u003e\n\u003cp\u003eIn case of doubt about compatibility, contact Krollit customer support providing the machine's serial number.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it an original spare part?\u003c\/summary\u003e\n\u003cp\u003eYes, Krollit has been an official Bernardo distributor since 2007 and only supplies original manufacturer accessories.\u003c\/p\u003e\n\u003cp\u003eNon-original accessories can compromise the machine's warranty and safety. It is recommended to always use manufacturer-certified components.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the delivery times?\u003c\/summary\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse.\u003c\/p\u003e\n\u003cp\u003eFor out-of-stock accessories, procurement times from the manufacturer can be 2-4 weeks. Please check availability before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan it be assembled independently?\u003c\/summary\u003e\n\u003cp\u003eFor simple accessories, yes; for components that require adjustments or calibrations, the intervention of a qualified technician is recommended.\u003c\/p\u003e\n\u003cp\u003eKrollit provides original Bernardo technical documentation for correct assembly.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\n\u003cp\u003eYes, manufacturer's warranty according to legal terms. The warranty is void if the accessory is installed on incompatible machines.\u003c\/p\u003e\n\u003cp\u003eKeep the invoice as proof of purchase. For warranty claims, contact Krollit customer support.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715450540360,"sku":"06-6141R","price":52.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Punzone-diam-20-mm-per-PBS-22-LS-extra-big-9355-093.jpg?v=1750288138"},{"product_id":"punzone-diam-5-mm-per-pbs-22-ls","title":"Accessory for Bernardo machine tool Punch diam. 5 mm for PBS 22 LS","description":"\u003cp\u003eBernardo Punch diam. 5 mm for PBS 22 LS is a machine tool accessory for professional use available at Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Punch diam. 5 mm for PBS 22 LS\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Punch diam. 5 mm for PBS 22 LS and for what\u003c\/h3\u003e\n\u003cp\u003eUsers who own a compatible machine install the Punch diam. 5 mm for PBS 22 LS as an original accessory to extend functionalities or replace worn components.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo Punch diam. 5 mm for PBS 22 LS is part of the Bernardo machine tool accessories range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Italian-speaking customer support available for technical documentation and compatibility verification with the reference machine. Krollit is an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Punch diam. 5 mm for PBS 22 LS for\u003c\/h3\u003e\n\u003cp\u003eThe punch diam. 5 mm for pbs 22 ls is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers who own a compatible machine\u003c\/strong\u003e: original accessory to extend the functionalities of the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshops with specific setup needs\u003c\/strong\u003e: component for special machining or increased precision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility with machines of other brands or models\u003c\/strong\u003e: verify machine model and specifications before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine is it compatible with?\u003c\/summary\u003e\n\u003cp\u003eCheck the machine model indicated in the title or description. Krollit only supplies original accessories for the machines in its catalog.\u003c\/p\u003e\n\u003cp\u003eIn case of doubts about compatibility, contact Krollit customer service providing the machine's serial number.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it an original spare part?\u003c\/summary\u003e\n\u003cp\u003eYes, Krollit has been an official Bernardo distributor since 2007 and only supplies original manufacturer accessories.\u003c\/p\u003e\n\u003cp\u003eNon-original accessories can compromise the warranty and safety of the machine. It is recommended to always use manufacturer-certified components.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the delivery times?\u003c\/summary\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse.\u003c\/p\u003e\n\u003cp\u003eFor out-of-stock accessories, procurement times from the manufacturer can be 2-4 weeks. Check availability before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan it be self-assembled?\u003c\/summary\u003e\n\u003cp\u003eFor simple accessories, yes; for components requiring adjustments or calibrations, the intervention of a qualified technician is recommended.\u003c\/p\u003e\n\u003cp\u003eKrollit provides original Bernardo technical documentation for correct assembly.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\n\u003cp\u003eYes, manufacturer's warranty according to legal terms. The warranty is void if the accessory is installed on incompatible machines.\u003c\/p\u003e\n\u003cp\u003eKeep the invoice as proof of purchase. For warranty claims, contact Krollit customer service.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715456733512,"sku":"06-6141C","price":52.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Punzone-diam-5-mm-per-PBS-22-LS-extra-big-9347-282.jpg?v=1750288203"},{"product_id":"set-coltelli-per-bhs-1040-bernardo","title":"Bernardo Cutter Set for BHS 1040,","description":"\u003cp\u003eBernardo BHS 1040 knife set is a professional cutting tool available from Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: BHS 1040 knife set\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the BHS 1040 knife set and what for\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the BHS 1040 knife set for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo BHS 1040 knife set is part of Bernardo's range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 working days from Krollit warehouse for spare parts and accessories. Italian customer support available for technical documentation and compatibility check with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the BHS 1040 knife set for?\u003c\/h3\u003e\n\u003cp\u003eThe BHS 1040 knife set is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machine\u003c\/strong\u003e: replacement part or original tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check machinable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the BHS 1040, a manual lever shear.\u003c\/p\u003e\n\u003cp\u003eThe BHS 1040 has sheet metal capacity up to 1.0 mm (400 N\/mm²), length 1015 mm and is intended for craft workshops and maintenance departments. Quick clamp, rear counterweight, adjustable fence for 45° cuts.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the BHS 1040 do?\u003c\/summary\u003e\n\u003cp\u003eIt is a manual lever shear with sheet metal capacity up to 1.0 mm (400 N\/mm²), length 1015 mm, suitable for craft workshops and maintenance departments.\u003c\/p\u003e\n\u003cp\u003eQuick clamp, rear counterweight, adjustable fence for 45° cuts. Regular replacement of original blades maintains precision and cutting quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when to replace them?\u003c\/summary\u003e\n\u003cp\u003eSigns include burr-filled cuts, sheet edge deformation, altered noise, and excessive operating effort.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance) the knives last many years. For daily workshop use, it is recommended to review every 6-12 months and replace preventively every 18-24 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removing fastening screws, disassembling the old knife, mounting the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: respect the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening will cause the knife to move, while excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715618017608,"sku":"06-6156","price":482.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-BHS-1040-Bernardo-extra-big-17733-233.png?v=1750290321"},{"product_id":"set-coltelli-per-fbs-1320","title":"Bernardo Cutting tool Set of knives for FBS 1320","description":"\u003cp\u003eThe Bernardo knife set for FBS 1320 is a professional cutting tool available on Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for FBS 1320\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for FBS 1320 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the knife set for FBS 1320 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for FBS 1320 is part of Bernardo's range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Italian-speaking customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for FBS 1320 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for FBS 1320 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with a compatible machine\u003c\/strong\u003e: replacement or original tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: verify machinable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThese are original Bernardo spare parts for the FBS 1320, a foot-operated guillotine shear.\u003c\/p\u003e\n\u003cp\u003eThe FBS 1320 has a sheet metal capacity of up to 1.5 mm (400 N\/mm²), length 1320 mm, and is intended for sheet metal and roofing workshops. Foot control for hands-free operation, back gauge 0-700 mm.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat operations is the FBS 1320 used for?\u003c\/summary\u003e\n\u003cp\u003eThe FBS 1320 is a foot-operated guillotine shear with a sheet metal capacity of up to 1.5 mm (400 N\/mm²), length 1320 mm, suitable for sheet metal and roofing workshops.\u003c\/p\u003e\n\u003cp\u003eFoot control for hands-free operation, back gauge 0-700 mm. Original Bernardo blades are made of hardened steel to ensure operational durability in continuous work.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloyed steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen should knives be replaced for intensive use?\u003c\/summary\u003e\n\u003cp\u003eFor continuous use (8 hours\/day), a review is recommended every 6 months and preventive replacement every 12-18 months.\u003c\/p\u003e\n\u003cp\u003eWear indicators: cutting with burrs, deformation of the sheet edge, altered noise during cutting, excessive effort during operation. Keep a spare set in stock.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715624669512,"sku":"06-6173","price":313.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-FBS-1320-extra-big-17732-260.jpg?v=1750290341"},{"product_id":"set-coltelli-per-fs-1270-x-16","title":"Bernardo Cutting Tool Knife Set for FS 1270 x 1.6","description":"\u003cp\u003eThe Bernardo Knife Set for FS 1270 x 1.6 is a cutting tool for professional use available at Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife Set for FS 1270 x 1.6\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Knife Set for FS 1270 x 1.6 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the Knife Set for FS 1270 x 1.6 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Knife Set for FS 1270 x 1.6 is part of the Bernardo cutting tools range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Knife Set for FS 1270 x 1.6 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for FS 1270 x 1.6 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the FS 1270 x 1.6, a foot-operated guillotine shear.\u003c\/p\u003e\n\u003cp\u003eThe FS 1270 x 1.6 has sheet metal capacity up to 1.6 mm, length 1270 mm, and is intended for sheet metal shops and series production. Cast iron structure, double-edged steel blades.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat operations should the FS 1270 x 1.6 be used for?\u003c\/summary\u003e\n\u003cp\u003eThe FS 1270 x 1.6 is a foot-operated guillotine shear with sheet metal capacity up to 1.6 mm, length 1270 mm, suitable for sheet metal shops and series production.\u003c\/p\u003e\n\u003cp\u003eCast iron structure, double-edged steel blades. Original Bernardo blades are made of hardened steel to ensure operational durability in continuous operations.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen to replace knives for intensive use?\u003c\/summary\u003e\n\u003cp\u003eFor continuous use (8 hours\/day), we recommend a review every 6 months and preventive replacement every 12-18 months.\u003c\/p\u003e\n\u003cp\u003eIndicators of wear: burred cut, deformation of the sheet edge, altered noise during cutting, excessive effort when operating. Keep a spare set in stock.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is replacement performed manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: adhere to the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move; excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715631616328,"sku":"06-6179","price":419.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-FS-1270-x-1-6-extra-big-17730-761.jpg?v=1750290362"},{"product_id":"set-coltelli-per-fs-2450-x-1-2","title":"Bernardo Cutter set knives for FS 2450 x 1.2","description":"\u003cp\u003eBernardo knives set for FS 2450 x 1.2 is a professional cutting tool available at Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knives set for FS 2450 x 1.2\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knives set for FS 2450 x 1.2 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the knives set for FS 2450 x 1.2 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo knives set for FS 2450 x 1.2 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knives set for FS 2450 x 1.2 for\u003c\/h3\u003e\n\u003cp\u003eThe knives set for FS 2450 x 1.2 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: verify workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the FS 2450 x 1.2, a foot shear.\u003c\/p\u003e\n\u003cp\u003eThe FS 2450 x 1.2 has a sheet metal capacity of up to 1.2 mm, a length of 2450 mm, and is intended for professional sheet metal fabricators and roofing production. It is the largest Bernardo foot shear, suitable for industrial roofing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat operations can the FS 2450 x 1.2 be used for?\u003c\/summary\u003e\n\u003cp\u003eThe FS 2450 x 1.2 is a foot shear with a sheet metal capacity of up to 1.2 mm, a length of 2450 mm, suitable for professional sheet metal fabricators and roofing production.\u003c\/p\u003e\n\u003cp\u003eIt is the largest Bernardo foot shear, suitable for industrial roofing. The original Bernardo blades are made of hardened steel to ensure operational durability in continuous operations.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eThe heat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen should knives be replaced for intensive use?\u003c\/summary\u003e\n\u003cp\u003eFor continuous use (8 hours\/day), it is recommended to review every 6 months and proactively replace every 12-18 months.\u003c\/p\u003e\n\u003cp\u003eWear indicators: burr cutting, sheet edge deformation, altered noise during cutting, excessive effort during operation. Keep a spare set in stock.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: remove fastening screws, disassemble the old knife, assemble the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715639415112,"sku":"06-6180","price":549.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-FS-2450-x-1-2-extra-big-17725-908.jpg?v=1750290385"},{"product_id":"set-coltelli-per-gs-1000","title":"Bernardo Cutting Tool Knife Set for GS 1000","description":"\u003cp\u003eThe Bernardo knife set for GS 1000 is a cutting tool for professional use, available from Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for GS 1000\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for GS 1000 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the knife set for GS 1000 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for GS 1000 is part of the Bernardo range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for GS 1000 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for GS 1000 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original replacement part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials outside specification\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the GS 1000, a lever shear with a long blade.\u003c\/p\u003e\n\u003cp\u003eThe GS 1000 has a thin sheet metal capacity of up to 1.5 mm, a length of 1000 mm, and is intended for sheet metal and light carpentry workshops. Base included, adjustable back gauge for repeatable cuts.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the GS 1000 cut?\u003c\/summary\u003e\n\u003cp\u003eThe GS 1000 is a lever shear with a long blade that cuts thin sheet metal up to 1.5 mm, with a length of 1000 mm.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for sheet metal and light carpentry workshops. For stainless steel and hardened materials, the nominal capacity may be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, deformation of the sheet metal edge, altered noise, and excessive force required for operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily workshop use, revision is recommended every 6-12 months and preventive replacement every 18-24 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: remove fixing screws, disassemble the old knife, mount the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening will cause the knife to move, while excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715646165320,"sku":"06-6166","price":317.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-GS-1000-extra-big-17738-794.jpg?v=1750290406"},{"product_id":"set-coltelli-per-hls-1050-x-15-hls-1050-x-20","title":"Bernardo Cutting tool Knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0","description":"\u003cp\u003eThe Bernardo knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0 is a professional cutting tool available from Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0 is part of the Bernardo range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HLS 1050 x 1.5 \/ HLS 1050 x 2.0 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with a compatible machine\u003c\/strong\u003e: replacement part or original tool for the specified machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-specification materials\u003c\/strong\u003e: verify workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HLS 1050, a manual guillotine shear.\u003c\/p\u003e\n\u003cp\u003eThe HLS 1050 has a sheet metal capacity of up to 1.5-2 mm (x15\/x20 versions), a length of 1050 mm, and is intended for sheet metal workshops. Version x 1.5 (1.5 mm) and x 2.0 (2.0 mm).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat sheet metal can the HLS 1050 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HLS 1050 is a manual guillotine shear with a sheet metal capacity of up to 1.5-2 mm (x15\/x20 versions), a length of 1050 mm.\u003c\/p\u003e\n\u003cp\u003eIt is intended for sheet metal workshops. Version x 1.5 (1.5 mm) and x 2.0 (2.0 mm). The capacity refers to mild steel S235JR (400 N\/mm²).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eThe heat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloyed steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burr cutting, deformation of the sheet edge, altered noise, excessive effort in operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), knives last many years. For daily use in the workshop, a revision every 6-12 months and preventive replacement every 18-24 months are recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening can cause the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715653407048,"sku":"06-6175","price":600.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HLS-1050-x-1-5-HLS-1050-x-2-0-extra-big-17728-126.png?v=1750290426"},{"product_id":"set-coltelli-per-hls-1280-x-15-hls-1280-x-20","title":"Bernardo Cutting tool Knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0","description":"\u003cp\u003eThe Bernardo knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0 is a cutting tool for professional use available at Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Italian-speaking customer service available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0 for?\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HLS 1280 x 1.5 \/ HLS 1280 x 2.0 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: verify workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HLS 1280, a manual guillotine shear.\u003c\/p\u003e\n\u003cp\u003eThe HLS 1280 has sheet metal capacity up to 1.5-2 mm (x15\/x20 versions), 1280 mm length, and is intended for sheet metal shops and maintenance workshops. x 1.5 version (1.5 mm) and x 2.0 version (2.0 mm).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat sheet metal can the HLS 1280 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HLS 1280 is a manual guillotine shear with sheet metal capacity up to 1.5-2 mm (x15\/x20 versions), 1280 mm length.\u003c\/p\u003e\n\u003cp\u003eIt is intended for sheet metal shops and maintenance workshops. x 1.5 version (1.5 mm) and x 2.0 version (2.0 mm). The capacity refers to mild steel S235JR (400 N\/mm²).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when to replace them?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, deformation of the sheet metal edge, altered noise, and excessive operating force.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily workshop use, revision every 6-12 months and preventive replacement every 18-24 months are recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: remove fixing screws, disassemble the old knife, assemble the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715659829576,"sku":"06-6176","price":768.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HLS-1280-x-1-5-HLS-1280-x-2-0-extra-big-17727-170.jpg?v=1750290448"},{"product_id":"set-coltelli-per-hs-10","title":"Bernardo Cutting tool Set of knives for HS 10","description":"\u003cp\u003eBernardo Knife set for HS 10 is a cutting tool for professional use available on Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for HS 10\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Knife set for HS 10 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the Knife set for HS 10 for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo Knife set for HS 10 is part of Bernardo's range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Italian customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Knife set for HS 10 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HS 10 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-specification materials\u003c\/strong\u003e: verify workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HS 10, a compact lever shear.\u003c\/p\u003e\n\u003cp\u003eThe HS 10 has sheet metal capacities up to 4 mm, length 210 mm, rounds Ø 13 mm, flats 70x5 mm and is intended for craft and professional workshops. Blade 255 mm, through hole and adjustable presser.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HS 10 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HS 10 is a compact lever shear that cuts sheet metal up to 4 mm, length 210 mm, rounds Ø 13 mm, flats 70x5 mm.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for craft and professional workshops. For stainless steel and hardened materials, the nominal capacity can be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burr cutting, sheet metal edge deformation, altered noise, excessive operating effort.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), knives last many years. For daily workshop use, revision every 6-12 months and preventive replacement every 18-24 months is recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is replacement performed manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fixing screws, disassembly of old knife, assembly of new knife with correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715667071304,"sku":"06-6122","price":96.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HS-10-extra-big-18082-249.png?v=1750290470"},{"product_id":"set-coltelli-per-hs-12","title":"Bernardo Cutting tool Set of knives for HS 12","description":"\u003cp\u003eThe Bernardo knife set for HS 12 is a cutting tool for professional use available at Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for HS 12\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for HS 12 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the HS 12 knife set for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for HS 12 is part of the Bernardo cutting tools range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for HS 12 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HS 12 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HS 12, a compact lever shear.\u003c\/p\u003e\n\u003cp\u003eThe HS 12 has sheet metal capacity up to 4 mm, length 265 mm, rounds Ø 13 mm, flats 70x5 mm and is intended for craft workshops, blacksmiths, construction sites. 300 mm blade, ergonomic lever for minimal effort.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HS 12 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HS 12 is a compact lever shear that cuts sheet metal up to 4 mm, length 265 mm, rounds Ø 13 mm, flats 70x5 mm.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for craft workshops, blacksmiths, construction sites. On stainless steel and hardened materials, the nominal capacity may decrease by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, deformation of the sheet edge, altered noise, excessive effort during operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily use in the workshop, an overhaul every 6-12 months and preventive replacement every 18-24 months is recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is the replacement performed manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715673952584,"sku":"06-6125","price":138.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HS-12-extra-big-17741-025.jpg?v=1750290491"},{"product_id":"set-coltelli-per-hs-5","title":"Bernardo HS 5 Cutter Set","description":"\u003cp\u003eThe Bernardo Knife Set for HS 5 is a cutting tool for professional use available at Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife Set for HS 5\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Knife Set for HS 5 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the Knife Set for HS 5 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Knife Set for HS 5 is part of the Bernardo cutting tools range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Knife Set for HS 5 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HS 5 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-specification materials\u003c\/strong\u003e: verify workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HS 5, a compact lever shear.\u003c\/p\u003e\n\u003cp\u003eThe HS 5 has sheet metal capacity up to 4 mm (400 N\/mm²), cutting length 130 mm and is intended for craft workshops, blacksmiths, hobbyists. Through hole for small rounds, adjustable anti-twist presser.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HS 5 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HS 5 is a compact lever shear that cuts sheet metal up to 4 mm (400 N\/mm²), cutting length 130 mm.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for craft workshops, blacksmiths, hobbyists. On stainless steel and hardened materials, the nominal capacity may be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eThe heat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, sheet metal edge deformation, altered noise, excessive effort during operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), knives last many years. For daily use in the workshop, revision every 6-12 months and preventive replacement every 18-24 months are recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715680440648,"sku":"06-6115","price":80.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HS-5-extra-big-17743-831.jpg?v=1750290512"},{"product_id":"set-coltelli-per-hs-500","title":"Bernardo HS 500 Blade Set","description":"\u003cp\u003eThe Bernardo knife set for HS 500 is a professional cutting tool available at Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for HS 500\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for HS 500 and what for\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the knife set for HS 500 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for HS 500 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for HS 500 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HS 500 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with a compatible machine\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check machinable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HS 500, a lever shear with a long blade.\u003c\/p\u003e\n\u003cp\u003eThe HS 500 has sheet metal capacity up to 0.8 mm (400 N\/mm²), length 500 mm, and is intended for artisanal workshops and small laboratories. Return spring and base included, for processing long sheet metal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HS 500 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HS 500 is a long-bladed lever shear that cuts sheet metal up to 0.8 mm (400 N\/mm²), 500 mm in length.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for artisanal workshops and small laboratories. For stainless steel and hardened materials, the nominal capacity may be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, sheet edge deformation, altered noise, excessive effort during operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily workshop use, a revision every 6-12 months and preventive replacement every 18-24 months are recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removing fastening screws, disassembling the old knife, mounting the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: respect the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening can cause the knife to move, while excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715686568264,"sku":"06-6165","price":168.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HS-500-extra-big-17740-629.jpg?v=1750290533"},{"product_id":"set-coltelli-per-hs-6","title":"Bernardo Set of Knives for HS 6 Cutting Tool","description":"\u003cp\u003eThe Bernardo Knife Set for HS 6 is a cutting tool for professional use available at Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife Set for HS 6\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Knife Set for HS 6 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the Knife Set for HS 6 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Knife Set for HS 6 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Knife Set for HS 6 for?\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HS 6 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: replacement part or original tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HS 6, a compact lever shear.\u003c\/p\u003e\n\u003cp\u003eThe HS 6 has sheet metal capacity up to 4 mm (400 N\/mm²), length 160 mm and is intended for blacksmiths, installers, and training workshops. Upper blade with through-hole for cutting rounds.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HS 6 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HS 6 is a compact lever shear that cuts sheet metal up to 4 mm (400 N\/mm²), 160 mm long.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for blacksmiths, installers, and training workshops. On stainless steel and hardened materials, the nominal capacity may be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eThe signs are burred cuts, deformation of the sheet edge, altered noise, excessive effort when operating.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance) the knives last many years. For daily workshop use, a review every 6-12 months and preventive replacement every 18-24 months are recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you replace them manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715693384008,"sku":"06-6116","price":63.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HS-6-extra-big-18089-882.png?v=1750290556"},{"product_id":"set-coltelli-per-hs-8","title":"Bernardo HS 8 Knife Set Cutting Tool","description":"\u003cp\u003eThe Bernardo knife set for HS 8 is a cutting tool for professional use available at Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for HS 8\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the HS 8 knife set and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the HS 8 knife set for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for HS 8 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the HS 8 knife set for\u003c\/h3\u003e\n\u003cp\u003eThe HS 8 knife set is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: replacement or original tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HS 8, a compact lever shear.\u003c\/p\u003e\n\u003cp\u003eThe HS 8 has sheet metal capacity up to 4 mm (400 N\/mm²), length 190 mm, round bars Ø 13 mm, flat bars 70x5 mm, and is intended for blacksmiths, installers, and training workshops. Blade 205 mm, optimized geometry to reduce effort.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HS 8 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HS 8 is a compact lever shear that cuts sheet metal up to 4 mm (400 N\/mm²), length 190 mm, round bars Ø 13 mm, flat bars 70x5 mm.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for blacksmiths, installers, and training workshops. For stainless steel and hardened materials, the nominal capacity may be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burr cutting, deformation of the sheet metal edge, altered noise, and excessive effort during operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily workshop use, revision every 6-12 months and preventive replacement every 18-24 months are recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: remove fixing screws, disassemble the old knife, assemble the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715702198600,"sku":"06-6120","price":83.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HS-8-extra-big-17742-812.jpg?v=1750290577"},{"product_id":"set-coltelli-per-hts-1050","title":"Bernardo Cutting Tool Knife Set for HTS 1050","description":"\u003cp\u003eBernardo HTS 1050 knife set is a cutting tool for professional use available at Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: HTS 1050 knife set\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the HTS 1050 knife set and what for\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the HTS 1050 knife set for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo HTS 1050 knife set is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the HTS 1050 knife set for?\u003c\/h3\u003e\n\u003cp\u003eThe HTS 1050 knife set is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with a compatible machine\u003c\/strong\u003e: replacement part or original tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HTS 1050, a manual guillotine shear.\u003c\/p\u003e\n\u003cp\u003eThe HTS 1050 has sheet metal capacity up to 1.5 mm (400 N\/mm²), length 1050 mm and is intended for sheet metal workshops and maintenance workshops. Manual lever vertical cutting, cast iron structure.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat sheet metal can the HTS 1050 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HTS 1050 is a manual guillotine shear with a sheet metal capacity of up to 1.5 mm (400 N\/mm²), length 1050 mm.\u003c\/p\u003e\n\u003cp\u003eIt is intended for sheet metal workshops and maintenance workshops. Manual lever vertical cutting, cast iron structure. The capacity refers to mild steel S235JR (400 N\/mm²).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, deformed sheet metal edges, altered noise, and excessive effort when operating.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily use in a workshop, it is recommended to overhaul every 6-12 months and replace preventively every 18-24 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you replace them manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be done by the operator: removing fastening screws, disassembling the old knife, mounting the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715710357832,"sku":"06-6150","price":317.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Accessori-presse.jpg?v=1750290599"},{"product_id":"set-coltelli-per-hts-1550","title":"Bernardo cutting tool Knife set for HTS 1550","description":"\u003cp\u003eThe Bernardo knife set for HTS 1550 is a cutting tool for professional use available at Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for HTS 1550\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for HTS 1550 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the knife set for HTS 1550 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for HTS 1550 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the machine suitable for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for HTS 1550 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HTS 1550 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check machinable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HTS 1550, a manual guillotine shear.\u003c\/p\u003e\n\u003cp\u003eThe HTS 1550 has sheet metal capacity up to 1.5 mm, length 1550 mm and is intended for professional sheet metal shops and workshops. Robust structure for continuous use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat sheet metal can the HTS 1550 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HTS 1550 is a manual guillotine shear with sheet metal capacity up to 1.5 mm, length 1550 mm.\u003c\/p\u003e\n\u003cp\u003eIt is intended for professional sheet metal shops and workshops. Robust structure for continuous use. The capacity refers to mild steel S235JR (400 N\/mm²).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, deformation of the sheet edge, altered noise, excessive effort when operating.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily workshop use, revision is recommended every 6-12 months and preventive replacement every 18-24 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is manual replacement performed?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: remove fixing screws, disassemble the old knife, assemble the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715715207496,"sku":"06-6152","price":393.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HTS-1550-extra-big-17729-847.png?v=1750290619"},{"product_id":"set-coltelli-per-hts-2050","title":"Bernardo Cutting tool Knife set for HTS 2050","description":"\u003cp\u003eThe Bernardo Knife Set for HTS 2050 is a professional cutting tool available from Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife Set for HTS 2050\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShips from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Knife Set for HTS 2050 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the Knife Set for HTS 2050 for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Knife Set for HTS 2050 is part of the Bernardo range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Knife Set for HTS 2050 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HTS 2050 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-specification materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThese are original Bernardo spare parts for the HTS 2050, a manual guillotine shear.\u003c\/p\u003e\n\u003cp\u003eThe HTS 2050 has a sheet metal capacity of up to 1.5 mm, a length of 2050 mm and is intended for metalworking shops and roofing production. Maximum size for manual HTS shears.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat sheet metal can the HTS 2050 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HTS 2050 is a manual guillotine shear with a sheet metal capacity of up to 1.5 mm and a length of 2050 mm.\u003c\/p\u003e\n\u003cp\u003eIt is intended for metalworking shops and roofing production. Maximum size for manual HTS shears. The capacity refers to mild steel S235JR (400 N\/mm²).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, deformation of the sheet edge, altered noise, excessive effort during operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance) the knives last many years. For daily use in a workshop, it is advisable to review them every 6-12 months and preventively replace them every 18-24 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you replace them manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removing fastening screws, disassembling the old knife, mounting the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715718811976,"sku":"06-6154","price":475.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-HTS-2050-extra-big-17726-865.png?v=1750290641"},{"product_id":"set-coltelli-per-pbs-16","title":"Bernardo cutting tool Knife set for PBS 16","description":"\u003cp\u003eThe Bernardo knife set for PBS 16 is a cutting tool for professional use available on Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife set for PBS 16\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the knife set for PBS 16 and what for\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the knife set for PBS 16 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo knife set for PBS 16 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the knife set for PBS 16 for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for PBS 16 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with a compatible machine\u003c\/strong\u003e: replacement part or original tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: verify machinable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the PBS 16 profile shear.\u003c\/p\u003e\n\u003cp\u003eThe PBS 16 has a sheet capacity of 6 mm, round bars Ø 16 mm, L\/T profiles 40x6 mm, and is intended for locksmiths and metal fabrication workshops. It also cuts angle profiles in addition to sheet metal and round bars.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the PBS 16 do?\u003c\/summary\u003e\n\u003cp\u003eIt is a profile shear with a sheet capacity of 6 mm, round bars Ø 16 mm, L\/T profiles 40x6 mm, suitable for locksmiths and metal fabrication workshops.\u003c\/p\u003e\n\u003cp\u003eIt also cuts angle profiles in addition to sheet metal and round bars. Regular replacement of original blades maintains cutting precision and quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burrs on cuts, deformation of the sheet edge, altered noise, and excessive effort during operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the knives last many years. For daily workshop use, an overhaul every 6-12 months and preventive replacement every 18-24 months is recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is the replacement performed manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, dismantling of the old knife, mounting of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: respect the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, while excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715720876360,"sku":"06-6135","price":301.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-coltelli-per-PBS-16-extra-big-17739-853.jpg?v=1750290662"},{"product_id":"set-di-coltelli-per-hsg-8","title":"Bernardo Cutter Set for HSG 8","description":"\u003cp\u003eBernardo Knife Set for HSG 8 is a professional cutting tool available from Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife Set for HSG 8\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Knife Set for HSG 8 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the Knife Set for HSG 8 for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo Knife Set for HSG 8 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Italian customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Knife Set for HSG 8 for?\u003c\/h3\u003e\n\u003cp\u003eThe knife set for HSG 8 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machines\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut of specification materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HSG 8, a lever shear.\u003c\/p\u003e\n\u003cp\u003eThe HSG 8 has a sheet metal capacity of up to 5 mm (400 N\/mm²), length 160 mm, rounds Ø 13 mm, flats 70x5 mm and is intended for installers, blacksmiths, training workshops. 205 mm blade with through hole for rounds, anti-twist hold-down.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HSG 8 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HSG 8 is a lever shear that cuts sheet metal up to 5 mm (400 N\/mm²), length 160 mm, rounds Ø 13 mm, flats 70x5 mm.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for installers, blacksmiths, training workshops. On stainless steel and hardened materials, the nominal capacity can be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need replacing?\u003c\/summary\u003e\n\u003cp\u003eThe signs are cutting with burrs, deformation of the sheet edge, altered noise, excessive effort when operating.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance) the knives last many years. For daily workshop use, a review every 6-12 months and preventive replacement every 18-24 months is recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is replacement carried out manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715735294280,"sku":"06-6121","price":91.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-di-coltelli-per-HSG-8-extra-big-18094-131.png?v=1750290800"},{"product_id":"set-di-coltelli-per-pbs-22-pbs-22-ls","title":"Bernardo Cutting tool Knife set for PBS 22 \/ PBS 22 LS","description":"\u003cp\u003eBernardo Knife Set for PBS 22 \/ PBS 22 LS is a cutting tool for professional use available on Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Knife Set for PBS 22 \/ PBS 22 LS\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Knife Set for PBS 22 \/ PBS 22 LS and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool laboratories use the Knife Set for PBS 22 \/ PBS 22 LS for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo Knife Set for PBS 22 \/ PBS 22 LS is part of Bernardo's range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the machine suitable for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Knife Set for PBS 22 \/ PBS 22 LS for\u003c\/h3\u003e\n\u003cp\u003eThe knife set for PBS 22 \/ PBS 22 LS is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool laboratories\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machine\u003c\/strong\u003e: replacement part or original tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: verify workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these knives for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the PBS 22 LS, a combined shear + punch.\u003c\/p\u003e\n\u003cp\u003eThe PBS 22 LS has a sheet metal capacity of 6 mm, round bars Ø 20 mm, L\/T profiles, punching up to Ø 20 mm and is intended for professional metal fabrication. It integrates a shear and a punch in a single manual tool.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the PBS 22 LS do?\u003c\/summary\u003e\n\u003cp\u003eIt is a combined shear + punch with a sheet metal capacity of 6 mm, round bars Ø 20 mm, L\/T profiles, punching up to Ø 20 mm, suitable for professional metal fabrication.\u003c\/p\u003e\n\u003cp\u003eIt integrates a shear and a punch in a single manual tool. Regular replacement of original blades maintains cutting precision and quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need to be replaced?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, sheet metal edge deformation, altered noise, excessive effort to operate.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance) the knives last many years. For daily use in the workshop, we recommend reviewing every 6-12 months and preventative replacement every 18-24 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is the replacement performed manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715736408392,"sku":"06-6140","price":405.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-di-coltelli-per-PBS-22-PBS-22-LS-extra-big-21594-906.jpg?v=1750290821"},{"product_id":"set-lame-da-taglio-per-pts-1050-s","title":"Bernardo Cutting tool Set of cutting blades for PTS 1050 S","description":"\u003cp\u003eBernardo Blade set for PTS 1050 S is a professional cutting tool available on Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Blade set for PTS 1050 S\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipped from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Blade set for PTS 1050 S and for what\u003c\/h3\u003e\n\u003cp\u003eMachine shops and tool workshops use the Blade set for PTS 1050 S for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo Blade set for PTS 1050 S is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping within 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Blade set for PTS 1050 S for\u003c\/h3\u003e\n\u003cp\u003eThe blade set for PTS 1050 S is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine shops and tool workshops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machine\u003c\/strong\u003e: replacement or original tool for the specified machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: verify workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these blades for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the PTS 1050, a motorized shear.\u003c\/p\u003e\n\u003cp\u003eThe PTS 1050 has a sheet metal capacity of up to 1.0 mm (400 N\/mm²), a length of 1050 mm, and is intended for artisanal workshops and laboratories. It features foot pedal control, double-edged blades, and a micrometer stop.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eThe PTS 1050 is motorized: does it have double-edged blades?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo MTA\/MTM\/MTE\/MTR motorized shears are fitted with double-edged upper and lower blades made of hardened steel to maximize operational life.\u003c\/p\u003e\n\u003cp\u003eWhen one cutting edge wears out, the blade can be rotated to use the opposite edge, effectively doubling its service life before complete replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should blades be replaced on a motorized shear?\u003c\/summary\u003e\n\u003cp\u003eOn motorized production shears, replacement depends on the cutting cycles: typically every 200,000-500,000 strokes on mild steel.\u003c\/p\u003e\n\u003cp\u003eIndicators of wear: increased burr, deformation of the sheet edge, altered noise, decreased dimensional precision. For MTE\/MTR with double-edged blades, rotate before replacing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is replacement performed on a motorized shear?\u003c\/summary\u003e\n\u003cp\u003eReplacement requires a qualified technician: disconnect power, remove guards, disassemble knives with torque wrenches, calibrate blade gap.\u003c\/p\u003e\n\u003cp\u003eThe blade gap (clearance) should be set according to the sheet thickness (typically 5-8% of the thickness). Incorrect calibration produces burrs or jams the machine. Krollit provides technical support.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715767374152,"sku":"06-6149B","price":407.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-lame-da-taglio-per-PTS-1050-S-extra-big-17734-193.png?v=1750291545"},{"product_id":"set-lame-da-taglio-per-pts-650-s-2","title":"Bernardo Cutting Tool Cutting blade set for PTS 650 S","description":"\u003cp\u003eBernardo Set of cutting blades for PTS 650 S is a cutting tool for professional use available at Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Set of cutting blades for PTS 650 S\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Set of cutting blades for PTS 650 S and for what\u003c\/h3\u003e\n\u003cp\u003eMachine shops and tool workshops use the Set of cutting blades for PTS 650 S for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo Set of cutting blades for PTS 650 S is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Italian-speaking customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Set of cutting blades for PTS 650 S for\u003c\/h3\u003e\n\u003cp\u003eThe set of cutting blades for PTS 650 S is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine shops and tool workshops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machine\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check workable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine are these blades for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the PTS 650, a small motorized shear.\u003c\/p\u003e\n\u003cp\u003eThe PTS 650 has sheet metal capacity up to 1.25 mm (400 N\/mm²), length 650 mm, and is intended for craft workshops and maintenance departments. Foot control, 0.75 kW motor at 400 V, micrometric stop.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the PTS 650 motorized: does it have double-edged blades?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo MTA\/MTM\/MTE\/MTR motorized shears are fitted with double-edged upper and lower blades made of hardened steel to maximize operational life.\u003c\/p\u003e\n\u003cp\u003eWhen one cutting edge wears out, the blade can be rotated to use the opposite edge, effectively doubling its lifespan before complete replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should blades be replaced on a motorized shear?\u003c\/summary\u003e\n\u003cp\u003eOn motorized shears for production, replacement depends on the cutting cycles: typically every 200,000-500,000 strokes on mild steel.\u003c\/p\u003e\n\u003cp\u003eIndicators of wear: increased burr, deformation of the sheet edge, altered noise, drop in dimensional precision. For MTE\/MTR with double-edged blades, rotate before replacing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is replacement carried out on a motorized shear?\u003c\/summary\u003e\n\u003cp\u003eReplacement requires a qualified technician: disconnecting power, removing guards, disassembling knives with torque wrenches, calibrating blade gap.\u003c\/p\u003e\n\u003cp\u003eThe blade gap (clearance) must be set according to the sheet metal thickness (typically 5-8% of the thickness). Incorrect calibration produces burr or jams the machine. Krollit provides technical support.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715768848712,"sku":"06-6148B","price":302.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-lame-da-taglio-per-PTS-650-S-extra-big-17736-602.png?v=1750291589"},{"product_id":"set-lame-per-hs-800","title":"Bernardo Cutting Tool Blade Set for HS 800","description":"\u003cp\u003eBernardo Blade Set for HS 800 is a professional cutting tool available from Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVendor: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Blade Set for HS 800\u003c\/li\u003e\n\u003cli\u003eOfficial Bernardo distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Blade Set for HS 800 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and tool shops use the Blade Set for HS 800 for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo Blade Set for HS 800 is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Blade Set for HS 800 for?\u003c\/h3\u003e\n\u003cp\u003eThe blade set for HS 800 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and tool shops\u003c\/strong\u003e: cutting and sharpening operations on compatible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsers with compatible machine\u003c\/strong\u003e: original spare part or tool for the indicated machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut-of-spec materials\u003c\/strong\u003e: check machinable material and tool geometry before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat machine are these blades for?\u003c\/summary\u003e\n\u003cp\u003eThey are original Bernardo spare parts for the HS 8, a compact lever shear.\u003c\/p\u003e\n\u003cp\u003eThe HS 8 has sheet metal capacity up to 4 mm (400 N\/mm²), length 190 mm, round bars Ø 13 mm, flat bars 70x5 mm, and is intended for blacksmiths, installers, and training workshops. 205 mm blade, optimized geometry to reduce effort.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does the HS 8 cut?\u003c\/summary\u003e\n\u003cp\u003eThe HS 8 is a compact lever shear that cuts sheet metal up to 4 mm (400 N\/mm²), length 190 mm, round bars Ø 13 mm, flat bars 70x5 mm.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for blacksmiths, installers, and training workshops. On stainless steel and hardened materials, the nominal capacity may be reduced by 30-40%.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the blades made of hardened steel?\u003c\/summary\u003e\n\u003cp\u003eYes, Bernardo blades are made of high-quality hardened and ground steel.\u003c\/p\u003e\n\u003cp\u003eHeat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloy steels or thick aluminum.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you know when they need replacing?\u003c\/summary\u003e\n\u003cp\u003eSigns include burred cuts, deformation of the sheet edge, altered noise, and excessive effort during operation.\u003c\/p\u003e\n\u003cp\u003eFor occasional use (hobby, maintenance), the blades last many years. For daily workshop use, a revision is recommended every 6-12 months and preventive replacement every 18-24 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is replacement done manually?\u003c\/summary\u003e\n\u003cp\u003eFor manual shears and notchers, replacement can be performed by the operator: remove fastening screws, disassemble the old blade, assemble the new one with the correct tightening torque.\u003c\/p\u003e\n\u003cp\u003eImportant: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the blade to move, excessive tightening risks cracking it. Krollit provides technical documentation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715791065416,"sku":"06-6170","price":246.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Set-lame-per-HS-800-extra-big-16390-715.jpg?v=1750291609"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/collections\/accessori-per-cesoia-manuale.png?v=1753776791","url":"https:\/\/www.krollit.com\/collections\/accessories-shear-manual.oembed","provider":"Krollit","version":"1.0","type":"link"}