{"title":"Compressed air","description":"\u003cp\u003e\u003cspan\u003e23 Bernardo compressed air products: compressors from €841 to €3,220 and bench sandblasters from €306 to €2,281. Vertical compressors from 270 L (7.5–10 HP), trolley-mounted twin-cylinder from 3–5.5 HP, and a silent oil-free 24 L model. Maximum pressure 10 bar across the entire range. Power supply 230V single-phase or 400V three-phase depending on the model. 4 SB 1\/2\/3\/4 bench sandblasters with capacities from 20 to 148 liters, plus original spare parts: gloves, ceramic nozzles, sandblasting guns, and replacement films. Official Bernardo distributor since 2007.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"compressore-professionali-senza-olio-ac-pro-250-24-f-w","title":"Oil-free Compressor Bernardo AC\/PRO\/250\/24\/F\/W – 24 L Silent 230V","description":"\u003cp\u003eThe Bernardo AC\/PRO\/250\/24\/F\/W oil-free compressor features a 24-liter tank, 230 l\/min suction capacity, 130 l\/min effective flow rate (VDMA 4362), 10 bar maximum pressure, 2 single-stage cylinders, 1,450 rpm speed, 75 dB(A) noise level, and a 1.1 kW single-phase 230V motor. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank capacity:\u003c\/strong\u003e 24 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction capacity:\u003c\/strong\u003e 230 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective flow rate (VDMA 4362):\u003c\/strong\u003e 130 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinders \/ Stages:\u003c\/strong\u003e 2 \/ 1 (single-stage)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1,450 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 75 dB(A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.1 kW – 230V single-phase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the AC\/PRO\/250\/24\/F\/W and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AC\/PRO\/250\/24\/F\/W is a professional 24-liter oil-free compressor for use in workshops, carpentry labs, and body shops: without oil in the circuit, the produced air is free of oil contaminants — essential for spray guns, painting, tires, and pneumatic tools where oil would compromise work quality. At 75 dB(A), it is among the quietest in its 24-liter professional category. The effective flow rate VDMA 4362 of 130 l\/min is the real continuous use value — the 230 l\/min value is the no-load suction capacity. Being single-phase 230V, it can be used with any standard outlet without a three-phase system.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Bernardo AC\/PRO\/250\/24\/F\/W for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eOil-free (clean air), 75 dB(A), 230V: the professional compressor for painting, inflation, and light pneumatic tools with no oil maintenance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional workshop \/ joinery\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e130 l\/min effective flow rate, 10 bar, 24 liters: sized for continuous professional use with spray guns and standard pneumatic tools.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntensive industrial production\u003c\/td\u003e\n\u003ctd\u003eNot indicated\u003c\/td\u003e\n\u003ctd\u003eFor continuous industrial use with heavy tools, consider compressors with 50+ liter tanks and higher flow rates.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot indicated for:\u003c\/strong\u003e high-consumption pneumatic tools (intensive pneumatic angle grinders); continuous industrial use with multiple simultaneous tools; environments requiring pressures above 10 bar.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e24 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction capacity\u003c\/td\u003e\n\u003ctd\u003e230 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective flow rate (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e130 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1,450 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003e75 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e1.1 kW (1.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230V \/ 50 Hz – single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003ePressure Equipment 2014\/68\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\u003cp\u003eBernardo shipping: 5–9 working days (7 days to the South). Original spare parts available with 3–5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does \"oil-free\" mean and why is it important?\u003c\/summary\u003e\n\u003cp\u003eAn oil-free compressor does not use oil to lubricate the pistons — it uses self-lubricating materials (PTFE or graphite). The air produced is therefore completely free of oil mist. For spray guns and painting, this is crucial: even minimal oil contamination in the air causes defects in the paint film (craters, bubbles, poor adhesion). For tire inflation and light pneumatic tools, the benefit is smaller, but the advantage is the lack of maintenance (no oil changes).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between 230 l\/min suction and 130 l\/min effective flow rate?\u003c\/summary\u003e\n\u003cp\u003eSuction capacity (230 l\/min) measures how much the compressor aspirates under no-load — a theoretical value. The effective flow rate VDMA 4362 (130 l\/min) measures how much compressed air at 7 bar the compressor produces continuously in the real world. To choose the right compressor, always use the effective flow rate: a tool with 80 l\/min consumption will have sufficient margin with 130 l\/min VDMA.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs 75 dB(A) quiet for a professional compressor?\u003c\/summary\u003e\n\u003cp\u003eYes. Traditional piston compressors produce 85–95 dB(A). The 75 dB(A) of this model is the result of low-speed oil-free technology (1,450 rpm vs 2,800–3,000 rpm for standard models) and acoustic insulation. For comparison, normal conversation is at 60 dB(A) and a household vacuum cleaner at 75–80 dB(A).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require periodic maintenance?\u003c\/summary\u003e\n\u003cp\u003eReduced maintenance compared to oil compressors: no oil changes. Periodic operations: drain condensation from the tank (daily or weekly), check air filter (monthly), check safety valve (annually). Original Bernardo spare parts available with 3–5 working days shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow many spray guns can it power simultaneously?\u003c\/summary\u003e\n\u003cp\u003eWith an effective flow rate of 130 l\/min at 7 bar, the compressor powers a standard HVLP spray gun (consumption 100–150 l\/min) continuously with small tank recharge breaks from the 24-liter tank. For two simultaneous guns, the flow rate is not sufficient — a compressor with a higher effective flow rate is needed.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694188335432,"sku":"70-1055","price":841.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_oil-free_Bernardo_AC_PRO_250_24_F_W_24_L_silenzioso.jpg?v=1761296385"},{"product_id":"compressore-stazionario-ac35-270-600-d","title":"Bernardo Stationary Compressor AC35\/270\/600\/D – 270 L, 5.5 HP","description":"\u003cp\u003eThe Bernardo AC35\/270\/600\/D two-stage stationary compressor offers a 270-liter tank, an effective VDMA 4362 flow rate of 480 l\/min, a maximum pressure of 10 bar, 2 cylinders with 2 stages, a speed of 1450 rpm, a sound level of 78 dB(A), and a 4.0 kW (5.5 HP) three-phase 400V motor. Weight 119 kg. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank capacity:\u003c\/strong\u003e 270 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction capacity:\u003c\/strong\u003e 600 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective flow rate (VDMA 4362):\u003c\/strong\u003e 480 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinders \/ Stages:\u003c\/strong\u003e 2 \/ 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1450 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 78 dB(A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 4.0 kW (5.5 HP) – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 119 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the AC35\/270\/600\/D and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AC35\/270\/600\/D is a two-stage stationary compressor with a 270-liter tank and an effective flow rate of 480 l\/min at 10 bar: sized for continuous professional use in mechanical workshops, body shops, paint shops, woodworking workshops, and production centers that require a constant supply of compressed air for multiple tools simultaneously. The low speed (1450 rpm) ensures long life and a low sound level (78 dB(A)) compared to high-speed compressors. The double compression stage produces cooler and drier air than a single-stage, reducing condensation in the circuit. In Krollit's customer workshops, it is used as a central pneumatic system.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Bernardo AC35\/270\/600\/D for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyist\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eRequires three-phase 400V and has industrial workshop dimensions. For hobby use, consider the oil-free compressor AC\/PRO\/250\/24\/F\/W in single-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional workshop \/ body shop\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e480 l\/min at 10 bar: sufficient to continuously power 2 standard pneumatic tools simultaneously.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial production\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e270 L tank and low speed (1450 rpm) for continuous cycles without overheating.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e domestic or hobby use; installations without three-phase 400V; pressures above 10 bar.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e270 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction capacity\u003c\/td\u003e\n\u003ctd\u003e600 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective flow rate (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e480 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1450 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound level\u003c\/td\u003e\n\u003ctd\u003e78 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4.0 kW (5.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V \/ 50 Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1540 × 500 × 1160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e119 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003ePressure Equipment 2014\/68\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\u003cp\u003eBernardo shipping: 5–9 business days (7 days to the South). With 119 kg, coordinate with Krollit for unloading equipment. Original spare parts available with 3–5 business day shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between a single-stage and a two-stage compressor?\u003c\/summary\u003e\n\u003cp\u003eIn a single-stage compressor, the piston compresses air in a single stroke to the final pressure. In a two-stage compressor (AC35\/270\/600\/D), the first stage compresses to an intermediate pressure, the air cools in an intercooler, then the second stage brings it to the final pressure. Result: cooler air (less condensation), more stable final pressure, reduced wear, longer lifespan. For continuous professional use, a two-stage compressor is always preferable.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow many pneumatic tools can it power simultaneously?\u003c\/summary\u003e\n\u003cp\u003eWith an effective flow rate of 480 l\/min at 7 bar, the compressor continuously powers tools with a total consumption of up to approximately 408 l\/min. For reference: pneumatic angle grinder 180–250 l\/min, HVLP spray gun 100–150 l\/min, pneumatic wrench 120–180 l\/min.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require periodic maintenance?\u003c\/summary\u003e\n\u003cp\u003eYes: oil change every 250–500 hours (according to manual), drain condensation from the tank (with each use), clean air filter (monthly), check drive belt (biannually). Original Bernardo oil, filters, and maintenance kits available with 3–5 business day shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require fixed installation or can it be on wheels?\u003c\/summary\u003e\n\u003cp\u003eThe AC35\/270\/600\/D is designed for stationary installation. The horizontal structure is stable on the floor. Contact Krollit for installation requirements and optional accessories.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AC35, AC38, and AC50?\u003c\/summary\u003e\n\u003cp\u003eAC35\/270\/600\/D: 4.0 kW, 480 l\/min flow rate, 119 kg weight — the lightest. AC38\/VER\/270\/850\/D: 5.5 kW, 700 l\/min flow rate, vertical, 151 kg — the most vertically compact. AC50\/VER\/270\/1200\/SD: 7.5 kW, 840 l\/min flow rate, vertical, 225 kg — the most powerful. The choice depends on the required flow rate and available space.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694199312712,"sku":"70-1100","price":1647.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_stazionario_Bernardo_AC35_270_600_D_270_L_5_5_HP.jpg?v=1761295734"},{"product_id":"compressore-verticale-ac50-ver-270-1200-sd","title":"Bernardo Vertical Compressor AC50\/VER\/270\/1200\/SD – 270 L, 10 HP","description":"\u003cp\u003eThe Bernardo AC50\/VER\/270\/1200\/SD vertical two-stage compressor offers a 270-liter tank, an effective flow rate VDMA 4362 of 840 l\/min, a maximum pressure of 10 bar, 2 cylinders with 2 stages, a speed of 1100 rpm, a sound level of 76 dB(A), and a 7.5 kW (10 HP) three-phase 400V motor. Weight 225 kg. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank capacity:\u003c\/strong\u003e 270 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction capacity:\u003c\/strong\u003e 1182 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective flow rate (VDMA 4362):\u003c\/strong\u003e 840 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinders \/ Stages:\u003c\/strong\u003e 2 \/ 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1100 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 76 dB(A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 7.5 kW (10 HP) – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 225 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the AC50\/VER\/270\/1200\/SD and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AC50\/VER\/270\/1200\/SD is a vertical two-stage compressor with a 270-liter tank and an effective flow rate of 840 l\/min at 10 bar: sized for continuous professional use in mechanical workshops, body shops, paint shops, carpentry workshops, and production centers that require a constant supply of compressed air for multiple simultaneous tools. The low speed (1100 rpm) ensures long life and a contained sound level (76 dB(A)) compared to high-speed compressors. The double compression stage produces cooler and drier air than a single-stage, reducing condensation in the circuit. In Krollit customers' workshops, it is used as the central pneumatic system for the workshop.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Bernardo AC50\/VER\/270\/1200\/SD for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eRequires three-phase 400V and has industrial workshop dimensions. For hobby use, consider the oil-free compressor AC\/PRO\/250\/24\/F\/W in single-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional workshop \/ body shop\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e840 l\/min at 10 bar: sufficient to power 3 standard pneumatic tools simultaneously and continuously.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial production\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e270 L tank and low speed (1100 rpm) for continuous cycles without overheating.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e domestic or hobby use; installations without three-phase 400V; pressures above 10 bar.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e270 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction capacity\u003c\/td\u003e\n\u003ctd\u003e1182 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective flow rate (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e840 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1100 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound level\u003c\/td\u003e\n\u003ctd\u003e76 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e7.5 kW (10 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V \/ 50 Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e980 × 600 × 2080 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e225 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003ePressure Equipment 2014\/68\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\u003cp\u003eBernardo shipping: 5–9 working days (7 days to the South). With 225 kg, coordinate with Krollit for unloading equipment. Original spare parts available with 3–5 working day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between single-stage and two-stage compressors?\u003c\/summary\u003e\n\u003cp\u003eIn a single-stage compressor, the piston compresses air in a single stroke to the final pressure. In a two-stage compressor (AC50\/VER\/270\/1200\/SD), the first stage compresses to an intermediate pressure, the air cools in an intercooler, then the second stage brings it to the final pressure. Result: cooler air (less condensation), more stable final pressure, reduced wear, longer lifespan. For continuous professional use, a two-stage compressor is always preferable.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow many pneumatic tools can it power simultaneously?\u003c\/summary\u003e\n\u003cp\u003eWith an effective flow rate of 840 l\/min at 7 bar, the compressor continuously powers tools with a total consumption of up to approximately 714 l\/min. For reference: pneumatic angle grinder 180–250 l\/min, HVLP spray gun 100–150 l\/min, pneumatic wrench 120–180 l\/min.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require periodic maintenance?\u003c\/summary\u003e\n\u003cp\u003eYes: oil change every 250–500 hours (according to manual), condensation drainage from the tank (after each use), air filter cleaning (monthly), drive belt inspection (biannually). Original Bernardo oil, filters, and maintenance kits are available with 3–5 working day shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require fixed installation or can it be on wheels?\u003c\/summary\u003e\n\u003cp\u003eThe AC50\/VER\/270\/1200\/SD is designed for fixed vertical installation. The vertical structure reduces floor space — ideal for workshops with limited space. Contact Krollit for installation requirements and optional accessories.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AC35, AC38, and AC50?\u003c\/summary\u003e\n\u003cp\u003eAC35\/270\/600\/D: 4.0 kW, flow rate 480 l\/min, weight 119 kg — the lightest. AC38\/VER\/270\/850\/D: 5.5 kW, flow rate 700 l\/min, vertical, 151 kg — the most compact vertically. AC50\/VER\/270\/1200\/SD: 7.5 kW, flow rate 840 l\/min, vertical, 225 kg — the most powerful. The choice depends on the required flow rate and available space.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694216810824,"sku":"70-1122","price":3220.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_verticale_Bernardo_AC50_VER_270_1200_SD_270_L_10_HP.jpg?v=1761295386"},{"product_id":"compressore-verticaleac38-ver-270-850-d","title":"Bernardo vertical compressor AC38\/VER\/270\/850\/D – 270 L, 7.5 HP","description":"\u003cp\u003eThe Bernardo AC38\/VER\/270\/850\/D vertical two-stage compressor offers a 270-liter tank, an effective flow rate VDMA 4362 of 700 l\/min, a maximum pressure of 10 bar, 2 cylinders with 2 stages, a speed of 1150 rpm, a sound level of 76 dB(A), and a 5.5 kW (7.5 HP) three-phase 400V motor. Weight 151 kg. Distributed in Italy by Krollit as the official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank capacity:\u003c\/strong\u003e 270 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction capacity:\u003c\/strong\u003e 850 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective flow rate (VDMA 4362):\u003c\/strong\u003e 700 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinders \/ Stages:\u003c\/strong\u003e 2 \/ 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1150 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 76 dB(A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5.5 kW (7.5 HP) – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 151 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the AC38\/VER\/270\/850\/D and for what purpose\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AC38\/VER\/270\/850\/D is a two-stage vertical compressor with a 270-liter tank and an effective flow rate of 700 l\/min at 10 bar: sized for continuous professional use in mechanical workshops, body shops, painting facilities, carpentry workshops, and production centers that require a constant supply of compressed air for multiple simultaneous tools. The low speed (1150 rpm) ensures a long service life and a contained sound level (76 dB(A)) compared to high-speed compressors. The two-stage compression produces cooler and drier air than single-stage, reducing condensation in the circuit. In Krollit customers' workshops, it is used as a central pneumatic system for the workshop.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Bernardo AC38\/VER\/270\/850\/D for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyist\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eRequires three-phase 400V and has industrial workshop dimensions. For hobby use, consider the oil-free compressor AC\/PRO\/250\/24\/F\/W in single-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional workshop \/ body shop\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e700 l\/min at 10 bar: sufficient to power 3 standard pneumatic tools simultaneously and continuously.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial production\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e270 L tank and low speed (1150 rpm) for continuous cycles without overheating.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e domestic or hobby use; installations without three-phase 400V; pressures above 10 bar.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e270 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction capacity\u003c\/td\u003e\n\u003ctd\u003e850 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective flow rate (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e700 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1150 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound level\u003c\/td\u003e\n\u003ctd\u003e76 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e5.5 kW (7.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V \/ 50 Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e730 × 600 × 1980 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e151 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003ePressure Equipment 2014\/68\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\u003cp\u003eBernardo shipping: 5–9 working days (7 days to the South). At 151 kg, coordinate with Krollit for unloading equipment. Original spare parts available with 3–5 working day shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between a single-stage and two-stage compressor?\u003c\/summary\u003e\n\u003cp\u003eIn a single-stage compressor, the piston compresses the air in a single stroke to the final pressure. In a two-stage compressor (AC38\/VER\/270\/850\/D), the first stage compresses to an intermediate pressure, the air cools in an intercooler, then the second stage brings it to the final pressure. Result: cooler air (less condensation), more stable final pressure, reduced wear, longer lifespan. For continuous professional use, two-stage is always preferable.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow many pneumatic tools can it power simultaneously?\u003c\/summary\u003e\n\u003cp\u003eWith an effective flow rate of 700 l\/min at 7 bar, the compressor can continuously power tools with a total consumption of up to approximately 595 l\/min. As a guide: pneumatic angle grinder 180–250 l\/min, HVLP spray gun 100–150 l\/min, pneumatic wrench 120–180 l\/min.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require periodic maintenance?\u003c\/summary\u003e\n\u003cp\u003eYes: oil change every 250–500 hours (according to manual), condensation drainage from the tank (after each use), air filter cleaning (monthly), drive belt check (biannually). Original Bernardo oil, filters, and maintenance kits available with 3–5 working day shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require a fixed installation or can it be on wheels?\u003c\/summary\u003e\n\u003cp\u003eThe AC38\/VER\/270\/850\/D is designed for fixed vertical installation. The vertical structure reduces floor space — ideal for workshops with limited space. Contact Krollit for installation requirements and optional accessories.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AC35, AC38 and AC50?\u003c\/summary\u003e\n\u003cp\u003eAC35\/270\/600\/D: 4.0 kW, flow rate 480 l\/min, weight 119 kg — the lightest. AC38\/VER\/270\/850\/D: 5.5 kW, flow rate 700 l\/min, vertical, 151 kg — the most vertically compact. AC50\/VER\/270\/1200\/SD: 7.5 kW, flow rate 840 l\/min, vertical, 225 kg — the most powerful. The choice depends on the required flow rate and available space.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694217630024,"sku":"70-1121","price":2427.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_verticale_Bernardo_AC38_VER_270_850_D_270_L_400_V.jpg?v=1761294820"},{"product_id":"guanti-da-lavoro-per-sb-1-1-paio","title":"Bernardo Work Gloves for Sandblaster SB 1 (1 pair) – original spare part, reinforced rubber and anti-abrasion fabric, mounting in the side holes of the cabinet","description":"\u003cp\u003eBernardo work gloves for the Bernardo SB 1 sandblaster are original spare parts made of rubber and reinforced anti-abrasion fabric, supplied in a pack of 1 pair. They are mounted in the side holes of the sandblasting cabinet to protect hands during abrasive sandblasting operations. The reinforced edge allows attachment to the armhole of the sandblaster, the inner surface offers a secure grip and optimal sensitivity, and the material resists abrasion and wear caused by micro-particles and metallic residues during work inside the cabinet. Compatible with the Bernardo SB 1 sandblaster and equivalent cabinets with the same hole size. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 1 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo SB 1 Sandblaster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber and reinforced anti-abrasion fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Original spare part for sandblasting cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e In the side holes of the cabinet with reinforced edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Bernardo - Austria\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses SB 1 gloves and for what\u003c\/h3\u003e\n\u003cp\u003eBernardo SB 1 sandblaster gloves are essential original spare parts for the correct operation of the SB 1 sandblasting cabinet. The gloves are mounted in the side holes of the cabinet with a reinforced edge, allowing the operator to handle the workpiece inside the cabinet while the abrasive flow is active, without exposing hands to abrasive particulate matter. Gloves are consumables: in daily professional use, they typically last 6-18 months before requiring replacement, depending on intensity of use, type of abrasive (fine silica lasts longer, aluminum oxide medium duration, steel grit shorter duration) and care in use. Key construction feature: the material is abrasion-resistant (rubber + reinforced fabric) but maintains sufficient flexibility for fine workpiece handling. For sandblasting operators: timely glove replacement is essential for safety: damaged or punctured gloves allow abrasive particulate matter to pass inside the cabinet towards the operator's hands, with a risk of injury. Krollit customers purchase gloves for: scheduled periodic replacement, warehouse stock to avoid machine downtime, protection for multiple operators with glove changes between shifts. The SB 1 sandblaster is the smallest model in the range (compact cabinet) for craft and advanced hobby use.\u003c\/p\u003e\n\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from warehouse (gloves are continuously stocked spare parts). Single pack with quick assembly instructions and protective packaging. For multiple stock orders (e.g., 5-10 pairs), Krollit offers dedicated conditions for professional workshops. Customer support in Italian available for compatibility questions.\u003c\/p\u003e\n\n\u003ch3\u003eWho the SB 1 gloves are for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBernardo SB 1 Sandblaster Operator\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eOriginal Bernardo spare part: sized exactly for the cabinet's hole and arm edge. Compatibility with non-Bernardo cabinets must be verified on a case-by-case basis.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorkshop with scheduled periodic replacement\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eStandard maintenance program: replacement every 6-18 months depending on intensity of use. For continuous intensive use, a stock of 2-3 pairs is recommended.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpare parts warehouse for technical service\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eResellers, technical service centers, and sandblaster maintenance workshops purchase stock to avoid customer machine downtime. Standard 3-5 business days shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e sandblasters of different brands without compatibility verification (cabinet hole and arm edge may be different); applications with aggressive non-standard abrasives (coarse aluminum oxide or steel grit can significantly reduce glove life); cabinets with non-standard hole size (compatibility verification with your model is recommended before purchase, especially for cabinets older than 15 years).\u003c\/p\u003e\n\n\u003ch3\u003eTechnical characteristics\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible model\u003c\/td\u003e\n\u003ctd\u003eBernardo SB 1 Sandblaster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWork gloves for sandblasting cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRubber and reinforced anti-abrasion fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e1 pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePPE Category\u003c\/td\u003e\n\u003ctd\u003eCategory II (medium risks)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 pair of work gloves for Bernardo SB 1 Sandblaster\u003c\/li\u003e\n\u003cli\u003eQuick assembly instructions\u003c\/li\u003e\n\u003cli\u003eProtective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre they compatible with sandblasters of other brands?\u003c\/summary\u003e\n\u003cp\u003eThe gloves are sized specifically for the Bernardo SB 1 Sandblaster cabinet and for equivalent cabinets with the same armhole size (typical diameter 200-220 mm). For sandblasters of other brands (Tecna, Vaniman, Trinity Tools, Renfert, etc.), check the hole diameter and arm edge before purchasing.\u003c\/p\u003e\n\u003cp\u003eSandblaster gloves are standardized products in most cases: the typical hole size is 200, 220, or 250 mm in diameter. For vintage cabinets (over 15 years old) or less common brands, compatibility verification is recommended: contact Krollit assistance providing the brand, model, and hole diameter for verification.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow long do they last in daily professional use?\u003c\/summary\u003e\n\u003cp\u003eThe typical lifespan is 6-18 months in daily professional use. Variability depends on: intensity of use (occasional sandblasting = longer life), type of abrasive used (fine silica = longer life; aluminum oxide = medium life; steel grit or steel shot = shorter life), care in use (complete removal of residues before touching the glove, delicate handling).\u003c\/p\u003e\n\u003cp\u003eFor continuous intensive use (more than 4 hours a day), replacement is recommended every 4-8 months even if the glove still appears intact: the material can lose elasticity over time, creating invisible micro-cracks that reduce protection. For occasional hobby use, the lifespan can extend to 3-5 years if the glove is kept in good storage conditions (dry, without direct sunlight exposure).\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow are they installed in the cabinet?\u003c\/summary\u003e\n\u003cp\u003eInstallation typically takes 5-10 minutes without special tools. Standard procedure: removal of old gloves (by loosening the clamping ring of the cabinet arm), cleaning the edge of the hole, inserting new gloves from inside the cabinet outwards, aligning the reinforced edge over the hole, tightening the ring with adequate pressure (neither too loose to prevent abrasive passage, nor too tight to prevent edge deformation).\u003c\/p\u003e\n\u003cp\u003eThe quick assembly instructions included in the package describe the specific procedure for the model. For cabinets with a different clamping system (e.g., threaded collar, lever clamp), instructions may vary slightly. After installation, a dry run test is recommended (close the cabinet, activate the suction, check for absence of particulate passage from the glove edges).\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhich abrasives are compatible?\u003c\/summary\u003e\n\u003cp\u003eThe gloves are compatible with all standard types of abrasives for professional sandblasting: silica (natural sand), aluminum oxide (corundum), silicon carbide (green), glass grit, glass beads, steel grit, plastic, sodium bicarbonate.\u003c\/p\u003e\n\u003cp\u003eFor aggressive abrasives (coarse aluminum oxide, steel grit for industrial sandblasting of large parts), glove life is significantly reduced: anticipate more frequent replacements. For delicate abrasives (glass beads for delicate finishing, sodium bicarbonate for cleaning), life is extended. Important: the use of abrasives not compatible with the specific cabinet (e.g., metallic abrasives in cabinets designed for silica) can cause accelerated damage to gloves and cabinet.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I wash them to reuse them for longer?\u003c\/summary\u003e\n\u003cp\u003eYes, to a limited extent. External cleaning with a dry or slightly damp cloth (water + mild soap) can remove accumulated abrasive residues. Deep washing with aggressive detergents is not recommended: it can degrade the material (rubber), reducing elasticity and protection.\u003c\/p\u003e\n\u003cp\u003eTo extend the life of gloves in daily use: removal of abrasive residues after each work session (with compressed air or dry cloth), storage in a dry environment without exposure to direct sunlight or heat sources, periodic inspection to identify micro-cracks or wear before they become problematic. Preventative replacement every 12 months even if the gloves appear intact: operator safety takes precedence over the maximum lifespan of the consumable component.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694546161992,"sku":"85-1053","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Guanti_Bernardo_per_sabbiatrice_SB_1_Ricambio_originale.jpg?v=1761294632"},{"product_id":"guanti-da-lavoro-per-sb-2-3-4-1-paio","title":"Bernardo Work Gloves for Sandblasters SB 2 \/ SB 3 \/ SB 4 (1 pair) – original spare part, reinforced anti-abrasion rubber and fabric, mounted in the side holes of the cabinet","description":"\u003cp\u003eBernardo work gloves for Bernardo sandblasters SB 2, SB 3, SB 4 are original spare parts made of rubber and reinforced anti-abrasion fabric, supplied in a pack of 1 pair. They are installed in the side holes of the sandblasting cabinet for hand protection during abrasive blasting operations. The reinforced edge allows attachment to the sandblaster arm hole, the inner surface offers a secure grip and optimal sensitivity, and the material resists abrasion and wear caused by micro-particles and metallic residues during work inside the cabinet. Compatible with Bernardo sandblasters SB 2, SB 3, SB 4 (larger models compared to SB 1) and equivalent cabinets with the same hole size. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 1 pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo Sandblasters SB 2, SB 3, SB 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber and reinforced anti-abrasion fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Original spare part for sandblasting cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e In the side holes of the cabinet with reinforced edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Bernardo - Austria\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses gloves for SB 2\/3\/4 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eBernardo SB 2, SB 3, SB 4 sandblaster gloves are original spare parts for the larger sandblasting cabinets in the Bernardo SB series (compared to the smaller SB 1 model). The gloves are mounted in the side holes of the cabinet with a reinforced edge, allowing the operator to manipulate the workpiece inside the cabinet while the abrasive flow is active. Key design feature: the material is abrasion-resistant (rubber + reinforced fabric) but maintains sufficient flexibility for fine manipulation of the workpiece. Gloves are consumable items: in daily professional use, they typically last 6-18 months before requiring replacement, depending on intensity of use, type of abrasive, and care in use. For professional sandblasting operators: timely glove replacement is essential for safety. Damaged or perforated gloves allow abrasive particulate to pass inside the cabinet towards the operator's hands, with a risk of injury. Krollit customers purchase gloves for: scheduled periodic replacement, stock to avoid machine downtime, protection of multiple operators with glove changes between shifts. The SB 2\/3\/4 sandblasters are the medium-large models in the range for professional workshops.\u003c\/p\u003e\n\n\u003ch3\u003eLogistics and Krollit support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from warehouse (gloves are continuously stocked spare parts). Single package with quick assembly instructions and protective packaging. For multiple stock orders (e.g., 5-10 pairs), Krollit offers dedicated conditions for professional workshops. Customer support in Italian available for compatibility questions.\u003c\/p\u003e\n\n\u003ch3\u003eWho are the gloves for SB 2\/3\/4 for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSandblasting operator for Bernardo Sandblasters SB 2, SB 3, SB 4\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eOriginal Bernardo spare part: precisely sized for the cabinet's hole and arm edge. Compatibility with non-Bernardo cabinets must be checked on a case-by-case basis.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorkshop with scheduled periodic replacement\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eStandard maintenance program: replacement every 6-18 months depending on intensity of use. For continuous intensive use, a stock of 2-3 pairs is recommended.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpare parts warehouse for technical service\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eResellers, technical service centers, and sandblaster maintenance workshops purchase stock to avoid customer machine downtime. Standard shipping 3-5 business days.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e sandblasters of different brands without compatibility verification (cabinet hole and arm edge may differ); applications with aggressive non-standard abrasives (coarse aluminum oxide or steel grit can significantly reduce glove life); cabinets with non-standard hole sizes (compatibility verification with your model is recommended before purchase, especially for cabinets older than 15 years).\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible model\u003c\/td\u003e\n\u003ctd\u003eBernardo Sandblasters SB 2, SB 3, SB 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWork gloves for sandblasting cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRubber and reinforced anti-abrasion fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e1 pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePPE Category\u003c\/td\u003e\n\u003ctd\u003eCategory II (medium risks)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 pair of work gloves for Bernardo Sandblasters SB 2, SB 3, SB 4\u003c\/li\u003e\n\u003cli\u003eQuick assembly instructions\u003c\/li\u003e\n\u003cli\u003eProtective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre they compatible with sandblasters of other brands?\u003c\/summary\u003e\n\u003cp\u003eThe gloves are specifically sized for the Bernardo Sandblasters SB 2, SB 3, SB 4 cabinet and for equivalent cabinets with the same arm hole size (typical diameter 200-220 mm). For sandblasters of other brands (Tecna, Vaniman, Trinity Tools, Renfert, etc.) check the hole diameter and arm edge before purchasing.\u003c\/p\u003e\n\u003cp\u003eSandblaster gloves are standardized products in most cases: the typical hole size is 200, 220, or 250 mm in diameter. For vintage cabinets (over 15 years old) or less common brands, compatibility verification is recommended: contact Krollit support providing the brand, model, and hole diameter for verification.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow long do they last in daily professional use?\u003c\/summary\u003e\n\u003cp\u003eThe typical lifespan is 6-18 months in daily professional use. Variability depends on: intensity of use (occasional sandblasting = longer life), type of abrasive used (fine silica = longer life; aluminum oxide = medium life; steel grit or steel shot = shorter life), care in use (complete removal of residues before touching the glove, gentle handling).\u003c\/p\u003e\n\u003cp\u003eFor intensive continuous use (more than 4 hours a day), replacement every 4-8 months is recommended even if the glove still appears intact: the material can lose elasticity over time, creating invisible micro-cracks that reduce protection. For occasional hobby use, the lifespan can extend to 3-5 years, keeping the glove in good storage conditions (dry, without exposure to direct sunlight).\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow are they installed in the cabinet?\u003c\/summary\u003e\n\u003cp\u003eInstallation typically takes 5-10 minutes without special tools. Standard procedure: remove old gloves (by loosening the clamping ring of the cabinet arm), clean the edge of the hole, insert new gloves from inside the cabinet outwards, align the reinforced edge on the hole, tighten the ring with appropriate pressure (not too loose to prevent abrasive passage, nor too tight to avoid edge deformation).\u003c\/p\u003e\n\u003cp\u003eThe quick assembly instructions included in the package describe the specific procedure for the model. For cabinets with a different clamping system (e.g., threaded collar, lever clamp), instructions may vary slightly. After installation, a leak test without abrasive is recommended (close the cabinet, activate suction, check for no particulate passage from the glove edges).\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat abrasives are compatible?\u003c\/summary\u003e\n\u003cp\u003eThe gloves are compatible with all types of standard abrasives for professional sandblasting: silica (natural sand), aluminum oxide (corundum), silicon carbide (green), glass beads, glass microspheres, steel grit, plastic, sodium bicarbonate.\u003c\/p\u003e\n\u003cp\u003eFor aggressive abrasives (coarse aluminum oxide, steel grit for industrial sandblasting of large parts), glove life is significantly reduced: plan for more frequent replacements. For delicate abrasives (glass microspheres for delicate finishing, sodium bicarbonate for cleaning), life is extended. Important: the use of abrasives not compatible with the specific cabinet (e.g., metallic abrasives in cabinets designed for silica) can cause accelerated damage to gloves and cabinet.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I wash them to reuse them longer?\u003c\/summary\u003e\n\u003cp\u003eYes, to a limited extent. External cleaning with a dry or slightly damp cloth (water + neutral soap) can remove accumulated abrasive residues. Deep washing with aggressive detergents is not recommended: it can degrade the material (rubber), reducing elasticity and protection.\u003c\/p\u003e\n\u003cp\u003eTo extend the life of gloves in daily use: remove abrasive residues after each work session (with compressed air or a dry cloth), store in a dry environment without exposure to direct sunlight or heat sources, periodic inspection to identify micro-cracks or wear before they become problematic. Preventive replacement every 12 months even if the gloves appear intact: operator safety takes precedence over the maximum life of the consumable component.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694554911048,"sku":"85-1052","price":21.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Guanti-da-lavoro-per-SB-2-3-4-1-paio-extra-big-10366.jpg?v=1750076571"},{"product_id":"pellicola-sostituibile-per-sb-1","title":"Replaceable film for SB 1","description":"\u003cp\u003eOriginal replaceable Bernardo film for the SB 1 sandblasting cabinet. Protects the viewport glass from abrasive sand, maintaining visibility during operation. Made in Austria, distributed in Italy by Krollit — official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replaceable protective film for viewport\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo SB 1 sandblasting cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Protects viewport glass from sand abrasion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Set of replaceable films\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cp\u003eDuring sandblasting, the flow of abrasive sand hits the viewport glass, progressively reducing its transparency. The replaceable protective film is applied to the glass and absorbs the abrasion instead of the glass — when it becomes opaque, it is removed and replaced with a new film, without having to replace the glass. This significantly reduces the long-term maintenance costs of the cabinet.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible with\u003c\/td\u003e\n\u003ctd\u003eBernardo SB 1 sandblasting cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReplaceable protective film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this accessory compatible with my model?\u003c\/summary\u003e\n\u003cp\u003eCheck the machine model before purchase. For compatibility confirmation, please contact Krollit. Customer support available in Italian.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts available?\u003c\/summary\u003e\n\u003cp\u003eOriginal Bernardo spare parts available with 3–5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDelivery times?\u003c\/summary\u003e\n\u003cp\u003e3–5 business day shipping for original Bernardo spare parts and accessories.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694884655432,"sku":"85-1051","price":10.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pellicola-sostituibile-per-SB-1-extra-big-10360.jpg?v=1750078508"},{"product_id":"pellicola-sostituibile-per-sb-2-sb-3","title":"Replaceable film for SB 2 \/ SB 3","description":"\u003cp\u003eOriginal Bernardo replaceable film for the SB 2 \/ SB 3 sandblasting cabinet. Protects the porthole glass from abrasive sand while maintaining visibility during processing. Made in Austria, in the Krollit catalog since 2007 as an official Bernardo distributor.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replaceable protective film for portholes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo SB 2 \/ SB 3 sandblasting cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Protection of porthole glass from sand abrasion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Set of replaceable films\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eDuring sandblasting, the flow of abrasive sand hits the porthole glass, progressively reducing its transparency. The replaceable protective film is applied to the glass and absorbs abrasion instead of the glass — when it becomes opaque, it is removed and replaced with a new film, without having to replace the glass. This significantly reduces the maintenance costs of the cabinet over time.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible with\u003c\/td\u003e\n\u003ctd\u003eBernardo SB 2 \/ SB 3 sandblasting cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReplaceable protective film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working days shipping. Customer service available in Italian.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this accessory compatible with my model?\u003c\/summary\u003e\n\u003cp\u003eCheck the machine model before purchasing. For confirmation of compatibility, contact Krollit. Customer service available in Italian.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eSpare parts available?\u003c\/summary\u003e\n\u003cp\u003eOriginal Bernardo spare parts available with 3–5 working days shipping. Customer service available in Italian.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDelivery times?\u003c\/summary\u003e\n\u003cp\u003e3–5 working days shipping for original Bernardo spare parts and accessories.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694887080264,"sku":"85-1056","price":13.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pellicola-sostituibile-per-SB-2-SB-3-extra-big-10358-184.jpg?v=1750078529"},{"product_id":"pellicola-sostituibile-persb-4","title":"Replacement film for SB 4","description":"\u003cp\u003eOriginal replaceable Bernardo film for the SB 4 sandblasting cabinet. It protects the viewing window glass from abrasive sand, maintaining visibility during operation. Made in Austria. Krollit has been an official distributor of Bernardo in Italy since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replaceable protective film for viewing window\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo SB 4 sandblasting cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Protection of viewing window glass from sand abrasion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Set of replaceable films\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePurpose\u003c\/h3\u003e\n\u003cp\u003eDuring sandblasting, the flow of abrasive sand hits the viewing window glass, progressively reducing its transparency. The replaceable protective film is applied to the glass and absorbs the abrasion instead of the glass — when it becomes opaque, it is removed and replaced with a new film, without having to replace the glass. This significantly reduces the maintenance costs of the cabinet over time.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible with\u003c\/td\u003e\n\u003ctd\u003eBernardo SB 4 sandblasting cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReplaceable protective film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 business days shipping. Customer service in Italian available.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this accessory compatible with my model?\u003c\/summary\u003e\n\u003cp\u003eVerify the machine model before purchase. To confirm compatibility, contact Krollit. Customer service in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eSpare parts available?\u003c\/summary\u003e\n\u003cp\u003eOriginal Bernardo spare parts available with 3–5 business days shipping. Customer service in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDelivery times?\u003c\/summary\u003e\n\u003cp\u003e3–5 business days shipping for original Bernardo spare parts and accessories.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694894649672,"sku":"85-1062","price":15.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pellicola-sostituibile-perSB-4-extra-big-10359.jpg?v=1750078552"},{"product_id":"pistola-sabbiante-per-sb-1-sb-2","title":"Sandblasting gun for SB 1 \/ SB 2","description":"\u003cp\u003eOriginal Bernardo blasting gun for SB 1 \/ SB 2 sandblasting cabinets. It delivers the abrasive sand flow directly and controlled onto the workpiece. Made in Austria, available from Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sandblasting gun for cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo SB 1 \/ SB 2 sandblasting cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Controlled delivery of abrasive sand flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Direct replacement for the original gun\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePurpose\u003c\/h3\u003e\n\u003cp\u003eThe blasting gun is the component that mixes compressed air and abrasive grit, delivering the flow onto the workpiece. Replacement is necessary when the original gun wears out (reduced flow, irregular distribution, air leaks). The original Bernardo gun ensures the correct pressure and flow rate for the type of cabinet and sand in use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible with\u003c\/td\u003e\n\u003ctd\u003eBernardo SB 1 \/ SB 2 Sandblasting Cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eOriginal Sandblasting Gun\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 business day shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this accessory compatible with my model?\u003c\/summary\u003e\n\u003cp\u003ePlease check the machine model before purchase. For compatibility confirmation, contact Krollit. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts available?\u003c\/summary\u003e\n\u003cp\u003eOriginal Bernardo spare parts available with 3–5 business day shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDelivery times?\u003c\/summary\u003e\n\u003cp\u003e3–5 business day shipping for original Bernardo spare parts and accessories.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694990758216,"sku":"85-1057","price":33.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pistola-sabbiante-per-SB-1-SB-2-extra-big-10362.jpg?v=1750078863"},{"product_id":"pistola-sabbiante-per-sb-3-sb-4","title":"Sandblasting gun for SB 3 \/ SB 4","description":"\u003cp\u003eOriginal Bernardo blasting gun for SB 3 \/ SB 4 sandblasting cabinets. It delivers the abrasive sand flow directly and controlled onto the workpiece. Made in Austria by Bernardo; Krollit has been the official distributor in Italy since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sandblasting gun for cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo SB 3 \/ SB 4 sandblasting cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Controlled delivery of abrasive sand flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Direct replacement of the original gun\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it is used for\u003c\/h3\u003e\n\u003cp\u003eThe blasting gun is the component that mixes compressed air and abrasive grit, delivering the flow onto the workpiece. Replacement is necessary when the original gun wears out (reduced flow, irregular distribution, air leaks). The original Bernardo gun guarantees the correct pressure and flow rate for the type of cabinet and sand in use.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible with\u003c\/td\u003e\n\u003ctd\u003eBernardo SB 3 \/ SB 4 sandblasting cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eOriginal blasting gun\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this accessory compatible with my model?\u003c\/summary\u003e\n\u003cp\u003eCheck the machine model before purchasing. To confirm compatibility, contact Krollit. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eSpare parts available?\u003c\/summary\u003e\n\u003cp\u003eOriginal Bernardo spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDelivery times?\u003c\/summary\u003e\n\u003cp\u003e3–5 working days shipping for original Bernardo spare parts and accessories.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694993477960,"sku":"85-1058","price":35.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pistola-sabbiante-per-SB-3-SB-4-extra-big-10361-608.jpg?v=1750078884"},{"product_id":"sabbiatrice-combinata-sb-2","title":"Sandblaster Bernardo SB 2 – Professional bench cabinet 55 kg","description":"\u003cp\u003e\u003cstrong\u003eBernardo SB 2 Sandblaster with Benchtop Cabinet for Professional Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo SB 2 sandblaster\u003c\/strong\u003e is a professional benchtop cabinet designed for \u003cstrong\u003eworkshops, body shops, agriculture, and industry\u003c\/strong\u003e. Suitable for \u003cstrong\u003epaint stripping, polishing, deburring, degreasing, and rust removal\u003c\/strong\u003e, it produces homogeneous and fast results on various materials. Constructed from \u003cstrong\u003erobust steel sheet\u003c\/strong\u003e with a \u003cstrong\u003edust-proof sealed door\u003c\/strong\u003e and \u003cstrong\u003eintegrated gloves\u003c\/strong\u003e, it ensures a safe and clean working environment. The large transparent panel with protective film and \u003cstrong\u003einternal lighting\u003c\/strong\u003e allow for optimal visibility during processing. With an \u003cstrong\u003eair consumption of 550 l\/min\u003c\/strong\u003e and operating pressure from \u003cstrong\u003e4 to 8 bar\u003c\/strong\u003e, it is compatible with various types of sand (60–100 mesh grit). The \u003cstrong\u003e37-liter hopper capacity\u003c\/strong\u003e allows for long work sessions without interruptions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Professional benchtop sandblasting cabinet\u003cbr\u003e Suitable for rust removal, deburring, polishing, and metal cleaning\u003cbr\u003e Solid steel sheet construction with integrated gloves\u003cbr\u003e Dust-proof, hermetically sealed loading door\u003cbr\u003e Transparent panel with protective film and internal light\u003cbr\u003e Air consumption 550 l\/min – operating pressure 4–8 bar\u003cbr\u003e 37-liter hopper for continuous work\u003cbr\u003e Suitable for body shops, workshops, and restorers\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical table:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSB 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork area dimensions\u003c\/td\u003e\n\u003ctd\u003e840 × 550 × 370 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplicable abrasive grit\u003c\/td\u003e\n\u003ctd\u003e60 – 100 mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir consumption\u003c\/td\u003e\n\u003ctd\u003e550 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating pressure\u003c\/td\u003e\n\u003ctd\u003e4 – 8 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHopper capacity\u003c\/td\u003e\n\u003ctd\u003e37 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm opening\u003c\/td\u003e\n\u003ctd\u003eØ 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir connection\u003c\/td\u003e\n\u003ctd\u003e¼\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 55 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Complete Bernardo SB 2 sandblasting cabinet\u003cbr\u003e Sandblasting gun with suction hose\u003cbr\u003e 4 ceramic nozzles (4 \/ 5 \/ 6 \/ 7 mm)\u003cbr\u003e Integrated protective gloves\u003cbr\u003e Internal lighting\u003cbr\u003e Transparent panel with protective film\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 working days (7 days to the South). Original spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SB 1, SB 2, SB 3, and SB 4?\u003c\/summary\u003e\n\u003cp\u003eSB 1: the most compact (benchtop cabinet for hobbyists, small volume, no integrated extractor). SB 2: professional benchtop cabinet, larger volume, integrated lighting. SB 3: like SB 2 with integrated extractor and filter — no external extractor required. SB 4: the largest (148 liters), for large parts, with integrated extractor. The choice depends on the volume of parts and frequency of use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of abrasive material is used?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets use dry granules: glass beads (for shiny surfaces), white or brown corundum (for roughing and satin finishing), garnet (for aluminum and soft materials), glass pearls (for finishing). Each abrasive leaves a different surface finish. The most common grit size is 80–120 mesh for general use. Do not use quartz sand — it produces silica dust that is dangerous to health.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SB 3 \/ SB 4 cabinet require an external extractor?\u003c\/summary\u003e\n\u003cp\u003eNo. SB 3 and SB 4 have integrated extractors and filters — they operate autonomously without connection to an external extractor. SB 1 and SB 2 require connection to an external extractor for air recirculation and dust filtration.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare nozzles and films available?\u003c\/summary\u003e\n\u003cp\u003eYes. Ceramic nozzles (Ø 4, 5, 6, 7 mm), protective films for the viewport, and all original Bernardo spare parts are available with 3–5 working days shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat compressor is needed for SB cabinets?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets require compressed air at 5–8 bar. A compressor with a minimum 50-liter tank and a minimum flow rate of 200–300 l\/min is suitable for intermittent use. For continuous use, prefer compressors with a higher flow rate — sandblasting is an operation with high air consumption.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50695165247816,"sku":"85-1055","price":822.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Sabbiatrice_Bernardo_SB_2_Cabina_di_sabbiatura_professionale_da_banco.jpg?v=1761665010"},{"product_id":"sabbiatrice-combinata-sb-3","title":"Bernardo SB 3 Sandblaster - With integrated vacuum and filter","description":"\u003cp\u003e\u003cstrong\u003eBernardo SB 3 Sandblaster with Extractor and Filter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo SB 3\u003c\/strong\u003e is a \u003cstrong\u003eprofessional sandblaster with an integrated extractor and filter\u003c\/strong\u003e, designed for the \u003cstrong\u003ecleaning and satin finishing of metal surfaces\u003c\/strong\u003e. It uses a pressurized flow of dry abrasive particles — such as glass beads or abrasive grit — to remove oxidation, paint residues, or impurities, restoring a uniform surface to the metal, ready for painting or treatment. The process takes place in a \u003cstrong\u003eclosed cabinet with a large transparent screen\u003c\/strong\u003e, allowing safe monitoring of the operation. Equipped with \u003cstrong\u003einternal lighting and a foot pedal for air control\u003c\/strong\u003e, it offers precise control during sandblasting. It can be connected to an \u003cstrong\u003eexternal air compressor or a centralized system\u003c\/strong\u003e. Robust, compact, and safe: suitable for workshops, body shops, and mechanical laboratories.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eMain Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Enclosed cabinet for safe and clean operations\u003cbr\u003e Integrated electric extractor with dust filter\u003cbr\u003e Internal lighting for optimal visibility\u003cbr\u003e Foot pedal control for air flow\u003cbr\u003e Large transparent viewing window\u003cbr\u003e Side door for easy loading of workpieces\u003cbr\u003e Operates with dry abrasive media (glass or grit)\u003cbr\u003e Connectable to a compressor or centralized air system\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical Data:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSB 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsable internal dimensions\u003c\/td\u003e\n\u003ctd\u003e1220 × 615 × 580 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsable abrasive grit size\u003c\/td\u003e\n\u003ctd\u003e0.149 – 0.250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir consumption\u003c\/td\u003e\n\u003ctd\u003e400 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired air pressure\u003c\/td\u003e\n\u003ctd\u003e2.7 – 5.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHopper capacity\u003c\/td\u003e\n\u003ctd\u003e184 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmhole opening\u003c\/td\u003e\n\u003ctd\u003e180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir connection\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectric extractor\u003c\/td\u003e\n\u003ctd\u003e230 V – 50 Hz – 1.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e125 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eBernardo – Austria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Bernardo SB 3 Sandblaster with extractor and filter\u003cbr\u003e Internal lamp with integrated electrical circuit\u003cbr\u003e Compressed air control foot pedal\u003cbr\u003e Integrated protective gloves\u003cbr\u003e User and maintenance manual\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 business days (7 days to the South). Original spare parts available with 3–5 business days shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SB 1, SB 2, SB 3, and SB 4?\u003c\/summary\u003e\n\u003cp\u003eSB 1: the most compact (benchtop cabinet for hobbyists, small volume, no integrated extractor). SB 2: professional benchtop cabinet, larger volume, integrated lighting. SB 3: like SB 2 with integrated extractor and filter — no external extractor required. SB 4: the largest (148 liters), for large workpieces, with integrated extractor. The choice depends on the volume of the pieces and frequency of use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of abrasive material is used?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets use dry grit: glass beads (for shiny surfaces), white or brown corundum (for roughing and satin finishing), garnet (for aluminum and soft materials), glass pearls (for finishing). Each abrasive leaves a different surface finish. The most common grit size is 80–120 mesh for general use. Do not use quartz sand — it produces silica dust which is dangerous for health.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SB 3 \/ SB 4 cabinet require an external extractor?\u003c\/summary\u003e\n\u003cp\u003eNo. SB 3 and SB 4 have integrated extractors and filters — they operate autonomously without connection to an external extractor. SB 1 and SB 2 require connection to an external extractor for air recirculation and dust filtration.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare nozzles and films available?\u003c\/summary\u003e\n\u003cp\u003eYes. Ceramic nozzles (Ø 4, 5, 6, 7 mm), protective films for the viewing window, and all original Bernardo spare parts are available with 3–5 business days shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat compressor is needed for SB cabinets?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets require compressed air at 5–8 bar. A compressor with a minimum 50-liter tank and a minimum flow rate of 200–300 l\/min is adequate for intermittent use. For continuous use, prefer compressors with a higher flow rate — sandblasting is an operation with high air consumption.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50695172981064,"sku":"85-1060","price":2025.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Sabbiatrice_Bernardo_SB_3_con_aspiratore_e_cabina_chiusa.jpg?v=1761294496"},{"product_id":"sabbiatrice-combinata-sb-4","title":"Sandblaster Bernardo SB 4 – Professional cabinet 148 liters","description":"\u003cp\u003e\u003cstrong\u003eBernardo SB 4 Sandblaster with 148-liter Professional Blasting Cabinet\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo SB 4 sandblaster\u003c\/strong\u003e is a large professional blasting cabinet suitable for \u003cstrong\u003eworkshops, body shops, restoration labs, and industrial use\u003c\/strong\u003e. It offers a generous working area of \u003cstrong\u003e1110 × 820 × 810 mm\u003c\/strong\u003e, suitable for large components. Constructed from \u003cstrong\u003ereinforced sheet steel\u003c\/strong\u003e, it ensures robustness, stability, and a long lifespan. The \u003cstrong\u003e148-liter hopper\u003c\/strong\u003e allows for a constant abrasive flow, while the closed system minimizes dust dispersion.\u003cbr\u003eWith an \u003cstrong\u003eair consumption of 680 l\/min\u003c\/strong\u003e and an \u003cstrong\u003eoperating pressure of 8.6 bar\u003c\/strong\u003e, it guarantees high performance and homogeneous results on steel, aluminum, or cast iron. The \u003cstrong\u003etransparent windows\u003c\/strong\u003e, \u003cstrong\u003eintegrated gloves\u003c\/strong\u003e, and \u003cstrong\u003einternal lighting\u003c\/strong\u003e offer optimal comfort and visibility during work.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eMain specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Large capacity professional blasting cabinet\u003cbr\u003e Spacious working area: 1110 × 820 × 810 mm\u003cbr\u003e Robust steel structure with integrated gloves\u003cbr\u003e Compatible with abrasives from 0.149 to 0.250 mm\u003cbr\u003e Air consumption 680 l\/min at 8.6 bar\u003cbr\u003e 148-liter hopper for long operating autonomy\u003cbr\u003e Air filter and dust-sealed door\u003cbr\u003e Suitable for cleaning, derusting, polishing, and degreasing\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical table:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSB 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking area dimensions\u003c\/td\u003e\n\u003ctd\u003e1110 × 820 × 810 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplicable abrasive grit\u003c\/td\u003e\n\u003ctd\u003e0.149 – 0.250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir consumption\u003c\/td\u003e\n\u003ctd\u003e680 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating pressure\u003c\/td\u003e\n\u003ctd\u003e8.6 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHopper capacity\u003c\/td\u003e\n\u003ctd\u003e148 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm opening\u003c\/td\u003e\n\u003ctd\u003eØ 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir connection\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 160 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Bernardo SB 4 blasting cabinet\u003cbr\u003e Blasting gun with suction hose\u003cbr\u003e Integrated protective gloves\u003cbr\u003e Filtration system and internal lighting\u003cbr\u003e Transparent panel with protective film\u003cbr\u003e User and maintenance manual\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 business days (7 days to the South). Original spare parts available with 3–5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SB 1, SB 2, SB 3, and SB 4?\u003c\/summary\u003e\n\u003cp\u003eSB 1: the most compact (benchtop cabinet for hobbyists, small volume, no integrated dust extractor). SB 2: professional benchtop cabinet, larger volume, integrated lighting. SB 3: like SB 2 with integrated dust extractor and filter — no external dust extractor required. SB 4: the largest (148 liters), for large parts, with integrated dust extractor. The choice depends on the volume of parts and frequency of use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of abrasive material is used?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets use dry granules: glass beads (for shiny surfaces), white or brown corundum (for roughing and satin finishing), garnet (for aluminum and soft materials), glass pearls (for finishing). Each abrasive leaves a different surface finish. The most common grit size is 80–120 mesh for general use. Do not use quartz sand — it produces hazardous silica dust.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SB 3 \/ SB 4 cabinet require an external dust extractor?\u003c\/summary\u003e\n\u003cp\u003eNo. SB 3 and SB 4 have integrated dust extractors and filters — they operate autonomously without connection to an external dust extractor. SB 1 and SB 2 require connection to an external dust extractor for air recirculation and dust filtration.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre replacement nozzles and films available?\u003c\/summary\u003e\n\u003cp\u003eYes. Ceramic nozzles (Ø 4, 5, 6, 7 mm), protective films for the viewport, and all original Bernardo spare parts are available with 3–5 business day shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat compressor is needed for SB cabinets?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets require compressed air at 5–8 bar. A compressor with a minimum 50-liter tank and a minimum flow rate of 200–300 l\/min is adequate for intermittent use. For continuous use, prefer compressors with a higher flow rate — sandblasting is an operation with high air consumption.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50695185006920,"sku":"85-1061","price":2281.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Sabbiatrice_Bernardo_SB_4_Cabina_professionale_148_litri.jpg?v=1761665301"},{"product_id":"sabbiatrice-da-banco-sb-1","title":"Bernardo Sandblaster SB 1 – Compact cabinet for hobbyists and workshops","description":"\u003cp\u003e\u003cstrong\u003eBernardo SB 1 Sandblaster with Benchtop Cabinet for Small Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo SB 1 sandblaster\u003c\/strong\u003e is a compact blasting cabinet suitable for \u003cstrong\u003eworkshops, restorers, and hobbyists\u003c\/strong\u003e. It is ideal for cleaning, derusting, and finishing \u003cstrong\u003esmall to medium-sized components\u003c\/strong\u003e, combining efficiency and ease of use in a benchtop format.\u003cbr\u003eThe robust structure features a \u003cstrong\u003etransparent lid with protective film\u003c\/strong\u003e, \u003cstrong\u003edust-proof seal\u003c\/strong\u003e, and an \u003cstrong\u003einternal grid\u003c\/strong\u003e for positioning parts. Thanks to its low air consumption (200–350 l\/min) and an \u003cstrong\u003eoperating pressure of 6–8 bar\u003c\/strong\u003e, it is compatible with most household or workshop compressors. The \u003cstrong\u003eintegrated abrasive tank of approximately 4.5 kg\u003c\/strong\u003e and \u003cstrong\u003einternal lighting\u003c\/strong\u003e make the work practical and precise. Weighing only \u003cstrong\u003e17 kg\u003c\/strong\u003e, the SB 1 is a compact and stable solution thanks to its \u003cstrong\u003enon-slip rubber feet\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eMain Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Compact blasting cabinet for small to medium parts\u003cbr\u003e Suitable for restorations, hobby use, and car maintenance\u003cbr\u003e Lid with transparent window and protective film\u003cbr\u003e Dust-proof seal for clean and safe work\u003cbr\u003e Internal grid for positioning parts\u003cbr\u003e 4.5 kg abrasive tank (60–80 mesh grit)\u003cbr\u003e Air consumption 200–350 l\/min at 6–8 bar\u003cbr\u003e Rubber feet for stability and vibration reduction\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical Data:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGüde\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSB 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork area dimensions\u003c\/td\u003e\n\u003ctd\u003e580 × 480 × 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplicable abrasive grit\u003c\/td\u003e\n\u003ctd\u003e60 – 80 mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir consumption\u003c\/td\u003e\n\u003ctd\u003e200 – 350 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating pressure\u003c\/td\u003e\n\u003ctd\u003e6 – 8 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm opening\u003c\/td\u003e\n\u003ctd\u003eØ 140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir connection\u003c\/td\u003e\n\u003ctd\u003e¼\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbrasive capacity\u003c\/td\u003e\n\u003ctd\u003eapprox. 4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 17 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Complete Bernardo SB 1 sandblaster\u003cbr\u003e Blasting gun with suction hose\u003cbr\u003e 4 ceramic nozzles (4 \/ 5 \/ 6 \/ 7 mm)\u003cbr\u003e Integrated protective gloves\u003cbr\u003e Internal lighting\u003cbr\u003e Protective film for viewing window\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 working days (7 days for Southern Italy). Original spare parts available with 3–5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SB 1, SB 2, SB 3, and SB 4?\u003c\/summary\u003e\n\u003cp\u003eSB 1: the most compact (benchtop cabinet for hobbyists, reduced volume, no integrated dust collector). SB 2: professional benchtop cabinet, larger volume, integrated lighting. SB 3: like SB 2 with integrated dust collector and filter — does not require an external dust collector. SB 4: the largest (148 liters), for large parts, with integrated dust collector. The choice depends on the size of the parts and frequency of use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of abrasive material is used?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets use dry granules: glass beads (for shiny surfaces), white or brown corundum (for roughing and satin finishing), garnet (for aluminum and soft materials), glass pearls (for finishing). Each abrasive leaves a different surface finish. The most common grit size is 80–120 mesh for general use. Do not use quartz sand — it produces hazardous silica dust.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SB 3 \/ SB 4 cabinet require an external dust collector?\u003c\/summary\u003e\n\u003cp\u003eNo. SB 3 and SB 4 have integrated dust collectors and filters — they operate autonomously without connection to an external dust collector. SB 1 and SB 2 require connection to an external dust collector for air recirculation and dust filtration.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare nozzles and films available?\u003c\/summary\u003e\n\u003cp\u003eYes. Ceramic nozzles (Ø 4, 5, 6, 7 mm), protective films for the viewing window, and all original Bernardo spare parts are available with 3–5 working days shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat compressor is needed for the SB cabinets?\u003c\/summary\u003e\n\u003cp\u003eBernardo SB 1–4 cabinets require compressed air at 5–8 bar. A compressor with a minimum 50-liter tank and a minimum flow rate of 200–300 l\/min is adequate for intermittent use. For continuous use, prefer compressors with a higher flow rate — sandblasting is an operation with high air consumption.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50695192478024,"sku":"85-1050","price":306.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Sabbiatrice-da-banco-SB-1-extra-big-10342.jpg?v=1750080511"},{"product_id":"ugelli-in-ceramica-4567-mm-per-sb-1-sb-2","title":"Ceramic nozzles (4,5,6,7 mm) for SB 1 \/ SB 2","description":"\u003cp\u003eBernardo ceramic nozzle set — 4, 5, 6, and 7 mm diameters — for SB 1 and SB 2 sandblasting cabinets. Ceramic ensures superior durability compared to standard plastic nozzles: it resists grit abrasion much longer. Made in Austria, distributed in Italy by Krollit — official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded diameters:\u003c\/strong\u003e 4 mm \/ 5 mm \/ 6 mm \/ 7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bernardo SB 1 \/ SB 2 sandblasting cabinets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High abrasion-resistant ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 4 nozzles (one for each diameter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat they are for\u003c\/h3\u003e\n\u003cp\u003eThe nozzle determines the diameter of the sand jet — a smaller nozzle produces a concentrated and precise jet (suitable for details and small surfaces); a larger nozzle produces a wide jet for extended surfaces (faster but less precise). Having all four diameters (4–7 mm) allows you to adapt the sandblasting to the type of workpiece and the desired effect. Ceramic lasts 5 to 10 times longer than standard plastic nozzles — significantly reducing cabinet maintenance costs over time.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible with\u003c\/td\u003e\n\u003ctd\u003eBernardo SB 1 \/ SB 2 Cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable diameters\u003c\/td\u003e\n\u003ctd\u003e4 \/ 5 \/ 6 \/ 7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-resistance ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage contents\u003c\/td\u003e\n\u003ctd\u003e4 nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this accessory compatible with my model?\u003c\/summary\u003e\n\u003cp\u003ePlease check the machine model before purchasing. For compatibility confirmation, contact Krollit. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDelivery times?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working days shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs assistance available?\u003c\/summary\u003e\n\u003cp\u003eCustomer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50697282388296,"sku":"85-1063","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Ugelli-in-ceramica-4-5-6-7-mm-per-SB-1-SB-2-extra-big-10364.jpg?v=1750091174"},{"product_id":"ugelli-in-ceramica-4567-mm-per-sb-3-sb-4","title":"Bernardo Ugelli ceramic accessory (4,5,6,7 mm) for SB 3 \/ SB 4","description":"\u003cp\u003eBernardo ceramic nozzles (4,5,6,7 mm) for SB 3 \/ SB 4 is a professional accessory available from Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Ceramic nozzles (4,5,6,7 mm) for SB 3 \/ SB 4\u003c\/li\u003e\n\u003cli\u003eOfficial distributor since 2007\u003c\/li\u003e\n\u003cli\u003eShipping from Krollit warehouse\u003c\/li\u003e\n\u003cli\u003eAssistance in Italian available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses ceramic nozzles (4,5,6,7 mm) for SB 3 \/ SB 4 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eUsers who own a compatible machine use the ceramic nozzles (4,5,6,7 mm) for SB 3 \/ SB 4 as an original spare part or component to extend the functionality of their equipment.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eBernardo ceramic nozzles (4,5,6,7 mm) for SB 3 \/ SB 4 is part of the Bernardo accessories range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the machine suitable for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping in 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian is available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho are the ceramic nozzles (4,5,6,7 mm) for SB 3 \/ SB 4 for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsers who already own a compatible machine\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eOriginal spare part or accessory for the indicated machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorkshops with periodic replacement needs\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eConsumable component or accessory to extend functionality\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility with machines of other brands\u003c\/td\u003e\n\u003ctd\u003eTo be evaluated\u003c\/td\u003e\n\u003ctd\u003eVerify specifications and machine model before purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e applications outside the technical specifications declared by the manufacturer. For doubts about compatibility, contact Krollit customer support.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich machine is it compatible with?\u003c\/summary\u003e\n\u003cp\u003eCheck the machine model indicated in the title or description. Krollit only supplies original accessories for the machines in its catalog.\u003c\/p\u003e\n\u003cp\u003eIn case of doubts about compatibility, contact Krollit customer support providing the machine's serial number.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it an original spare part?\u003c\/summary\u003e\n\u003cp\u003eYes, Krollit has been an official Bernardo distributor since 2007 and only supplies original manufacturer spare parts.\u003c\/p\u003e\n\u003cp\u003eNon-original spare parts can compromise the machine's warranty and safety. It is recommended to always use manufacturer-certified components.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the delivery times?\u003c\/summary\u003e\n\u003cp\u003eSpare parts shipping 3-5 business days from Krollit warehouse.\u003c\/p\u003e\n\u003cp\u003eFor out-of-stock spare parts, procurement times from the manufacturer can be 2-4 weeks. Check availability before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\n\u003cp\u003eYes, manufacturer's warranty according to legal terms. The warranty is void if the accessory is installed on incompatible machines.\u003c\/p\u003e\n\u003cp\u003eKeep the invoice as proof of purchase. For warranty claims, contact Krollit customer support.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan it be assembled independently?\u003c\/summary\u003e\n\u003cp\u003eFor simple accessories, yes; for spare parts that require adjustments or calibrations, the intervention of a qualified technician is recommended.\u003c\/p\u003e\n\u003cp\u003eKrollit provides original Bernardo technical documentation for correct assembly. For complex interventions, technical assistance is available upon request.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50697297297736,"sku":"85-1064","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Ugelli-in-ceramica-4-5-6-7-mm-per-SB-3-SB-4-extra-big-10363-824.jpg?v=1750091196"},{"product_id":"compressore-mobile-ac35-100-600-f-d","title":"Bernardo Mobile Compressor AC35\/100\/600\/F\/D – 100 L, 5.5 HP","description":"\u003cp\u003e\u003cstrong\u003eBernardo AC35\/100\/600\/F\/D Mobile Compressor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo AC35\/100\/600\/F\/D\u003c\/strong\u003e is a \u003cstrong\u003eprofessional mobile compressor\u003c\/strong\u003e with a \u003cstrong\u003e100-liter tank\u003c\/strong\u003e and a \u003cstrong\u003e4.0 kW (5.5 HP) three-phase motor\u003c\/strong\u003e, suitable for workshops, body shops, and craft laboratories. The \u003cstrong\u003e1-stage twin-cylinder pump unit\u003c\/strong\u003e offers an \u003cstrong\u003eintake air volume of 600 l\/min\u003c\/strong\u003e and a \u003cstrong\u003euseful output of 460 l\/min\u003c\/strong\u003e, maintaining a \u003cstrong\u003emaximum pressure of 10 bar\u003c\/strong\u003e. Designed for \u003cstrong\u003ehigh performance and long life\u003c\/strong\u003e, it operates at \u003cstrong\u003elow speed (1450 rpm)\u003c\/strong\u003e, reducing wear and noise (only \u003cstrong\u003e78 dB(A)\u003c\/strong\u003e). The design with \u003cstrong\u003elarge wheels and an ergonomic handle\u003c\/strong\u003e facilitates movement, while the robust steel structure ensures stability even on uneven surfaces. Powerful, quiet, and reliable: perfect for intensive professional use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Professional 100-liter mobile compressor\u003cbr\u003e High-efficiency 1-stage twin-cylinder system\u003cbr\u003e Powerful 4.0 kW (5.5 HP) – 400 V three-phase motor\u003cbr\u003e Intake air volume 600 l\/min – useful output 460 l\/min\u003cbr\u003e Maximum pressure 10 bar\u003cbr\u003e Quiet operation (78 dB(A))\u003cbr\u003e Reduced speed 1450 rpm for extended life\u003cbr\u003e Wheeled structure with wheels and ergonomic handle\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical table:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC35\/100\/600\/F\/D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e1-stage mobile compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e100 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake capacity\u003c\/td\u003e\n\u003ctd\u003e600 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilling capacity (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e460 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1450 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4.0 kW (5.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e400 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound level\u003c\/td\u003e\n\u003ctd\u003e78 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1160 × 520 × 1080 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e92 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eBernardo – Austria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Bernardo AC35\/100\/600\/F\/D mobile compressor\u003cbr\u003e Pre-assembled 100-liter tank\u003cbr\u003e Safety valve and air filter\u003cbr\u003e User and maintenance manual\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 working days (7 days to the South). Original spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eFor what professional uses is the Bernardo AC Mobile Compressor sized?\u003c\/summary\u003e\n\u003cp\u003eWith a 100-liter tank and a maximum pressure of 10 bar, the Bernardo AC Mobile Compressor is sized for: paint spray guns (requiring 6–8 bar, 150–300 l\/min), pneumatic screwdrivers (6 bar, 100–150 l\/min), compressed air tools in mechanical workshops, light sandblasting. The 100-liter tank ensures sufficient autonomy for continuous work without frequent stops for refilling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e400 V three-phase – does it require special installation?\u003c\/summary\u003e\n\u003cp\u003eIt requires a 400V three-phase system – not available in standard private homes. Before purchasing, verify the presence of three-phase power and the capacity of the electrical panel. The three-phase motor guarantees superior torque and durability compared to a single-phase motor of the same rated power.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do I maintain the compressor's efficiency?\u003c\/summary\u003e\n\u003cp\u003eDrain condensation from the tank weekly (or after each intensive session) by opening the drain valve at the bottom. Change the pump unit oil every 500 operating hours or annually. Check the safety valve operation every 6 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and assistance available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50725400838472,"sku":"70-1082","price":1683.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_mobile_Bernardo_AC35_100_600_F_D_100_L_5_5_HP.jpg?v=1761322514"},{"product_id":"compressore-mobile-ac35-200-600-f-d","title":"Compressor with trolley Bernardo AC35\/200\/600\/F\/D – 200 L, 5.5 HP","description":"\u003cp\u003e\u003cstrong\u003eBernardo AC35\/200\/600\/F\/D Trolley Compressor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo AC35\/200\/600\/F\/D\u003c\/strong\u003e is a \u003cstrong\u003etrolley compressor\u003c\/strong\u003e designed for \u003cstrong\u003eprofessional and intensive use\u003c\/strong\u003e, suitable for workshops, body shops, and laboratories that require \u003cstrong\u003ehigh air autonomy\u003c\/strong\u003e and constant performance. The \u003cstrong\u003e200-liter tank\u003c\/strong\u003e ensures a high air reserve, while the \u003cstrong\u003e4.0 kW (5.5 HP) three-phase motor\u003c\/strong\u003e and the \u003cstrong\u003etwo-stage twin-cylinder pump unit\u003c\/strong\u003e guarantee an \u003cstrong\u003eintake air flow rate of 600 l\/min\u003c\/strong\u003e and a \u003cstrong\u003euseful output of approximately 580 l\/min\u003c\/strong\u003e at a \u003cstrong\u003emaximum pressure of 10 bar\u003c\/strong\u003e. The \u003cstrong\u003elow speed operation (1450 rpm)\u003c\/strong\u003e reduces noise (78 dB(A)) and extends motor life. The robust and balanced trolley structure facilitates movement even on uneven surfaces. A powerful, stable, and quiet compressor for demanding professional applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e 200-liter trolley compressor for professional use\u003cbr\u003e Two-stage twin-cylinder system for high performance\u003cbr\u003e 4.0 kW (5.5 HP) three-phase motor – 400 V \/ 50 Hz\u003cbr\u003e Intake air flow rate 600 l\/min – useful output 580 l\/min\u003cbr\u003e Maximum pressure 10 bar\u003cbr\u003e Low speed (1450 rpm) for quiet operation (78 dB(A))\u003cbr\u003e Trolley structure for easy transport and optimal stability\u003cbr\u003e Suitable for workshops, body shops, sandblasters, and pneumatic systems\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical Data:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC35\/200\/600\/F\/D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eTwo-stage trolley compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e200 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction capacity\u003c\/td\u003e\n\u003ctd\u003e600 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilling capacity (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e580 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1450 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4.0 kW (5.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e400 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound level\u003c\/td\u003e\n\u003ctd\u003e78 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1140 × 540 × 1060 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e114 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eBernardo – Austria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Bernardo AC35\/200\/600\/F\/D Compressor with integrated trolley\u003cbr\u003e 200-liter pre-assembled tank\u003cbr\u003e Safety valve and air filter\u003cbr\u003e User and maintenance manual\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 business days (7 days to the South). Original spare parts available with 3–5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eFor which professional uses is the Bernardo Trolley Compressor dimensioned?\u003c\/summary\u003e\n\u003cp\u003eWith a 200-liter tank and a maximum pressure of 10 bar, the Bernardo Trolley Compressor is dimensioned for: spray guns for painting (require 6–8 bar, 150–300 l\/min), pneumatic screwdrivers (6 bar, 100–150 l\/min), compressed air tools in mechanical workshops, light sandblasting. The 200-liter tank guarantees sufficient autonomy for continuous work without frequent stops for refilling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e400 V three-phase — is a special system required?\u003c\/summary\u003e\n\u003cp\u003eRequires a 400V three-phase system — not available in standard private homes. Before purchasing, verify the presence of three-phase power and the capacity of the electrical panel. A three-phase motor guarantees higher torque and durability than a single-phase motor of the same nominal power.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do I maintain the compressor's efficiency?\u003c\/summary\u003e\n\u003cp\u003eDrain condensation from the tank weekly (or after each intensive session) by opening the drain valve at the bottom. Change the pump unit oil every 500 operating hours or annually. Check the operation of the safety valve every 6 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and assistance available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50725401690440,"sku":"70-1091","price":1732.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_con_carrello_Bernardo_AC35_200_600_F_D_200_L_5_5_HP.jpg?v=1761322610"},{"product_id":"compressore-mobile-ac38-200-850-f-d","title":"Bernardo Compressor AC38\/200\/850\/F\/D – Powerful 200L, 10 bar","description":"\u003cp\u003e\u003cstrong\u003eBernardo AC38\/200\/850\/F\/D Compressor with 200-liter Trolley\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo AC38\/200\/850\/F\/D compressor\u003c\/strong\u003e is a high-performance professional machine, suitable for workshops, body shops, and industrial work requiring consistent and reliable compressed air. Equipped with a \u003cstrong\u003e200-liter tank\u003c\/strong\u003e and a \u003cstrong\u003e5.5 kW (7.5 HP) motor\u003c\/strong\u003e, it offers an \u003cstrong\u003eintake capacity of 850 l\/min\u003c\/strong\u003e and an \u003cstrong\u003eeffective capacity of 760 l\/min\u003c\/strong\u003e. Its \u003cstrong\u003etwo-cylinder, two-stage design\u003c\/strong\u003e ensures energy efficiency and stable compression up to \u003cstrong\u003e10 bar of pressure\u003c\/strong\u003e. The \u003cstrong\u003eintegrated trolley\u003c\/strong\u003e allows for easy movement despite its 126 kg weight, making it practical even in dynamic work environments. With a noise level of only \u003cstrong\u003e76 dB(A)\u003c\/strong\u003e, it represents a powerful yet quiet choice for continuous use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eMain specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Professional compressor with integrated trolley\u003cbr\u003e 200-liter tank for high autonomy\u003cbr\u003e Intake capacity 850 l\/min, effective output 760 l\/min\u003cbr\u003e 5.5 kW (7.5 HP) motor – 400V three-phase power supply\u003cbr\u003e Two-cylinder, two-stage for stable compression\u003cbr\u003e Maximum pressure 10 bar\u003cbr\u003e Quiet operation – only 76 dB(A)\u003cbr\u003e Robust and easy-to-move structure (126 kg)\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical table:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC38\/200\/850\/F\/D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e200 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake capacity\u003c\/td\u003e\n\u003ctd\u003e850 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective capacity (VDMA 4362, 70%)\u003c\/td\u003e\n\u003ctd\u003e760 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation speed\u003c\/td\u003e\n\u003ctd\u003e1150 U\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e5.5 kW (7.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e400 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003e76 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e1140 x 540 x 1220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 126 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Complete Bernardo AC38\/200\/850\/F\/D compressor\u003cbr\u003e Trolley with mounted wheels\u003cbr\u003e User and maintenance manual\u003cbr\u003e Drain plug and standard fittings\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 business days (7 days to the South). Original spare parts available with 3–5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat professional uses is the Bernardo AC38\/200 compressor designed for?\u003c\/summary\u003e\n\u003cp\u003eWith a 200-liter tank and a maximum pressure of 10 bar, the Bernardo AC38\/200 compressor is designed for: paint spray guns (requiring 6–8 bar, 150–300 l\/min), pneumatic wrenches (6 bar, 100–150 l\/min), compressed air tools in mechanical workshops, light sandblasting. The 200-liter tank ensures sufficient autonomy for continuous work without frequent recharging stops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e400 V three-phase — is a special system required?\u003c\/summary\u003e\n\u003cp\u003eRequires a 400V three-phase system — not available in standard private homes. Before purchasing, verify the presence of three-phase power and the capacity of the electrical panel. The three-phase motor guarantees higher torque and durability than a single-phase motor of the same nominal power.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is the compressor maintained for efficiency?\u003c\/summary\u003e\n\u003cp\u003eDrain condensation from the tank every week (or after every intensive session) by opening the drain valve at the bottom. Change the pump unit oil every 500 operating hours or annually. Check the safety valve operation every 6 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and assistance available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50725402673480,"sku":"70-1092","price":2455.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_Bernardo_AC38_200_850_F_D_200L_10_bar_doppio_stadio.jpg?v=1761664235"},{"product_id":"compressore-montaggio-mobile-ac17-duo-f-d","title":"Guede AC17\/DUO\/F\/D Trolley Compressor – 3 HP, 400 V, 10 bar","description":"\u003cp\u003e\u003cstrong\u003eGüde AC17\/DUO\/F\/D Trolley Compressor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGüde AC17\/DUO\/F\/D\u003c\/strong\u003e is a \u003cstrong\u003eprofessional trolley compressor\u003c\/strong\u003e with a \u003cstrong\u003e2.2 kW (3 HP) three-phase motor\u003c\/strong\u003e and a \u003cstrong\u003e2 × 11 liter dual tank\u003c\/strong\u003e, suitable for craft and light industrial applications. Thanks to its \u003cstrong\u003esingle-stage twin-cylinder pump unit\u003c\/strong\u003e, it guarantees an \u003cstrong\u003eintake air flow of 330 l\/min\u003c\/strong\u003e and a \u003cstrong\u003euseful output of approximately 200 l\/min\u003c\/strong\u003e, with a \u003cstrong\u003emaximum pressure of 10 bar\u003c\/strong\u003e. The \u003cstrong\u003elow-speed operation (1550 rpm)\u003c\/strong\u003e ensures a long lifespan and a \u003cstrong\u003ereduced noise level of 74 dB(A)\u003c\/strong\u003e. The frame with \u003cstrong\u003erobust wheels and an ergonomic handle\u003c\/strong\u003e allows for easy transport in the workshop or on the construction site. Compact, powerful, and reliable, the Güde AC17\/DUO\/F\/D compressor is perfect for those seeking \u003cstrong\u003emobility and professional performance\u003c\/strong\u003e in a single machine.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eMain Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Trolley compressor with 2 × 11 liter dual tank\u003cbr\u003e High-efficiency single-stage twin-cylinder system\u003cbr\u003e 2.2 kW (3 HP) three-phase motor – 400 V \/ 50 Hz\u003cbr\u003e Intake air flow 330 l\/min – useful output 200 l\/min\u003cbr\u003e Maximum pressure 10 bar\u003cbr\u003e Quiet operation at 74 dB(A)\u003cbr\u003e Mobile structure with wheels and transport handle\u003cbr\u003e suitable for craft use, workshops, and construction site work\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical table:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGüde\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC17\/DUO\/F\/D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSingle-stage trolley compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e2 × 11 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake capacity\u003c\/td\u003e\n\u003ctd\u003e330 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilling capacity (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e200 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1550 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e400 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003e74 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e780 × 640 × 740 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e60 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGüde – Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Güde AC17\/DUO\/F\/D trolley compressor\u003cbr\u003e 2 × 11 liter tanks mounted\u003cbr\u003e Safety valve and air filter\u003cbr\u003e User and maintenance manual\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 working days (7 days to the South). Original spare parts available with 3–5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eThe Guede A Trolley Compressor — for which professional uses is it sized?\u003c\/summary\u003e\n\u003cp\u003eWith a 100-liter tank and a maximum pressure of 10 bar, the Guede A Trolley Compressor is sized for: spray guns for painting (requiring 6–8 bar, 150–300 l\/min), pneumatic screwdrivers (6 bar, 100–150 l\/min), compressed air tools in mechanical workshops, light sandblasting. The 100-liter tank ensures sufficient autonomy for continuous work without frequent stops for recharging.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e400 V three-phase — does it require a special system?\u003c\/summary\u003e\n\u003cp\u003eRequires a 400V three-phase system — not available in standard private homes. Before purchasing, verify the presence of three-phase power and the capacity of the electrical panel. The three-phase motor guarantees higher torque and durability than a single-phase motor of the same nominal power.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is the compressor maintained for efficiency?\u003c\/summary\u003e\n\u003cp\u003eDrain condensation from the tank weekly (or after every intense session) by opening the drain valve at the bottom. Change the pump unit oil every 500 operating hours or annually. Check the safety valve operation every 6 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and assistance available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50725403263304,"sku":"70-1041","price":1085.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_carrellato_G_de_AC17_DUO_F_D_3_HP_400_V.jpg?v=1761314165"},{"product_id":"compressore-montaggio-mobile-ac17-duo-f-w","title":"Bernardo AC17\/DUO\/F\/W Wheeled Compressor – 3 HP, Silent","description":"\u003cp\u003e\u003cstrong\u003eBernardo AC17\/DUO\/F\/W Trolley Compressor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo AC17\/DUO\/F\/W\u003c\/strong\u003e is a \u003cstrong\u003ecompact and quiet trolley compressor\u003c\/strong\u003e, designed for professionals and artisans who need \u003cstrong\u003ereliable and easily transportable compressed air\u003c\/strong\u003e. Equipped with a \u003cstrong\u003e2.2 kW (3 HP) single-phase motor\u003c\/strong\u003e and a \u003cstrong\u003edouble tank of 2 × 11 liters\u003c\/strong\u003e, it provides an \u003cstrong\u003eintake air flow of 320 l\/min\u003c\/strong\u003e and a \u003cstrong\u003euseful output of 220 l\/min\u003c\/strong\u003e with a \u003cstrong\u003emaximum pressure of 10 bar\u003c\/strong\u003e. The two-cylinder, \u003cstrong\u003esingle-stage\u003c\/strong\u003e pump unit operates at low speed (1500 rpm) to ensure \u003cstrong\u003edurability and quiet operation (74 dB(A))\u003c\/strong\u003e. It is suitable for powering pneumatic tools, air guns, nail guns, and blowing devices. The design with an \u003cstrong\u003eergonomic handle and robust wheels\u003c\/strong\u003e makes it perfect for mobile use in the workshop or on construction sites.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Professional trolley compressor with 2 × 11 liter tanks\u003cbr\u003e 2.2 kW (3 HP) motor – 230 V single-phase\u003cbr\u003e Intake air flow 320 l\/min – useful output 220 l\/min\u003cbr\u003e Maximum pressure 10 bar\u003cbr\u003e Two-cylinder, single-stage pump unit\u003cbr\u003e Quiet operation (74 dB(A)) and low speed (1500 rpm)\u003cbr\u003e Mobile structure with wheels and handle for transport\u003cbr\u003e Suitable for artisan use, maintenance, and mobile work\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical table:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC17\/DUO\/F\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e1-stage trolley compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e2 × 11 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction capacity\u003c\/td\u003e\n\u003ctd\u003e320 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilling capacity (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e220 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1500 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound level\u003c\/td\u003e\n\u003ctd\u003e74 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e780 × 640 × 740 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e64 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eBernardo – Austria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Bernardo AC17\/DUO\/F\/W trolley compressor\u003cbr\u003e 2 × 11 liter tanks pre-assembled\u003cbr\u003e Safety valve and integrated air filter\u003cbr\u003e User manual and maintenance instructions\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 working days (7 days to the South). Original spare parts available with 3–5 working day shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eThe Bernard Trolley Compressor – for which professional uses is it sized?\u003c\/summary\u003e\n\u003cp\u003eWith a 100-liter tank and a maximum pressure of 10 bar, the Bernard Trolley Compressor is sized for: paint spray guns (require 6–8 bar, 150–300 l\/min), pneumatic screwdrivers (6 bar, 100–150 l\/min), compressed air tools in a mechanical workshop, light sandblasting. The 100-liter tank ensures sufficient autonomy for continuous work without frequent stops for refilling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e230 V single-phase – does it connect to a normal outlet?\u003c\/summary\u003e\n\u003cp\u003eYes – standard 230V single-phase power, no special system required. Verify that the compressor's absorption is compatible with the line protection (typically 16A). Do not connect to power strips with other high-absorption appliances.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you maintain the compressor's efficiency?\u003c\/summary\u003e\n\u003cp\u003eDrain condensation from the tank weekly (or after each intensive session) by opening the drain valve at the bottom. Change the pump unit's oil every 500 operating hours or annually. Check the safety valve's operation every 6 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and assistance available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50725403918664,"sku":"70-1040","price":1085.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_carrellato_Bernardo_AC17_DUO_F_W_3_HP_silenzioso.jpg?v=1761296669"},{"product_id":"compressore-montaggio-mobileac35-duo-f-d","title":"Bernardo AC35\/DUO\/F\/D Portable Compressor – 5.5 HP, 10 bar","description":"\u003cp\u003e\u003cstrong\u003eBernardo AC35\/DUO\/F\/D Portable Compressor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo AC35\/DUO\/F\/D\u003c\/strong\u003e is a \u003cstrong\u003eprofessional portable compressor\u003c\/strong\u003e with a \u003cstrong\u003e4.0 kW (5.5 HP) three-phase motor\u003c\/strong\u003e and a \u003cstrong\u003edouble 2 × 11 liter tank\u003c\/strong\u003e. Designed for intensive use, it combines \u003cstrong\u003epower, mobility, and compactness\u003c\/strong\u003e in a single system. The two-cylinder, \u003cstrong\u003etwo-stage pump unit\u003c\/strong\u003e guarantees a \u003cstrong\u003esuction capacity of 600 l\/min\u003c\/strong\u003e and an \u003cstrong\u003eeffective output of approximately 430 l\/min\u003c\/strong\u003e, with a \u003cstrong\u003emaximum pressure of 10 bar\u003c\/strong\u003e. Thanks to its \u003cstrong\u003ereduced speed of 1450 rpm\u003c\/strong\u003e, it offers long life and quiet operation (only \u003cstrong\u003e78 dB(A)\u003c\/strong\u003e). The frame with wheels and ergonomic handle facilitates transport in the workshop or on the construction site. Suitable for pneumatic tools, painting, sandblasting, and craft applications where constant and reliable air is needed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003ch3\u003eMain Specifications\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Compact portable compressor with double 11 + 11 liter tank\u003cbr\u003e Two-cylinder, two-stage system for greater efficiency\u003cbr\u003e Suction air volume 600 l\/min – effective output 430 l\/min\u003cbr\u003e Maximum pressure 10 bar\u003cbr\u003e 4.0 kW (5.5 HP) three-phase motor – 400 V \/ 50 Hz\u003cbr\u003e Quiet operation (78 dB(A))\u003cbr\u003e Mobile structure with robust wheels and ergonomic handle\u003cbr\u003e Suitable for professional and mobile craft use\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTechnical data:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC35\/DUO\/F\/D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eTwo-stage portable compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e2 × 11 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction capacity\u003c\/td\u003e\n\u003ctd\u003e600 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilling capacity (VDMA 4362)\u003c\/td\u003e\n\u003ctd\u003e430 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e1450 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders \/ Stages\u003c\/td\u003e\n\u003ctd\u003e2 \/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4.0 kW (5.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e400 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound level\u003c\/td\u003e\n\u003ctd\u003e78 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e780 × 640 × 810 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e88 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eBernardo – Austria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e Bernardo AC35\/DUO\/F\/D portable compressor\u003cbr\u003e 2 × 11 liter tanks assembled\u003cbr\u003e Air filter and safety valve\u003cbr\u003e User and maintenance manual\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 working days (7 days for the South). Original spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eFor what professional uses is the Bernardo Portable Compressor dimensioned?\u003c\/summary\u003e\n\u003cp\u003eWith a 100-liter tank and a maximum pressure of 10 bar, the Bernardo Portable Compressor is dimensioned for: spray guns for painting (requiring 6–8 bar, 150–300 l\/min), pneumatic screwdrivers (6 bar, 100–150 l\/min), compressed air tools in mechanical workshops, light sandblasting. The 100-liter tank ensures sufficient autonomy for continuous work without frequent stops for refilling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e400 V three-phase — does it require a special electrical system?\u003c\/summary\u003e\n\u003cp\u003eRequires a 400V three-phase system — not available in standard private homes. Before purchasing, verify the presence of three-phase power and the capacity of the electrical panel. The three-phase motor guarantees higher torque and durability than a single-phase motor of the same nominal power.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to maintain the compressor efficiently?\u003c\/summary\u003e\n\u003cp\u003eDrain condensation from the tank weekly (or after each intense session) by opening the drain valve at the bottom. Change the pump unit oil every 500 operating hours or annually. Check the operation of the safety valve every 6 months.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eSpare parts and assistance available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50725405262152,"sku":"70-1050","price":1647.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_carrellato_Bernardo_AC35_DUO_F_D_compatto_e_potente.jpg?v=1761296080"},{"product_id":"compressore-senza-olio-bernardo-acpro","title":"Bernardo Oil-free Air Compressor AC\/PRO\/500\/20V\/F\/W","description":"\u003cp\u003e\u003cstrong\u003eBernardo AC\/PRO\/500\/20V\/F\/W Oil-Free Air Compressor – 1.8 kW Motor, 20 L Tank\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe Bernardo AC\/PRO\/500\/20 compressor represents a balanced solution between portability and capacity for artisan workshops, light carpentry, and temporary construction sites where single-phase 220V power is available. The oil-free system eliminates the need for pre-heating, oil condensate drainage, and compressed air filtration, reducing the complexity of routine maintenance compared to traditional oil compressors. This makes the machine ideal for those who need clean air for painting, blowing, and pneumatic air tools (drills, grinders) without additional pre-drying.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.8 kW single-phase motor develops enough power to generate a free-air delivery of 460 l\/min: this volume allows simultaneous power supply to 2-3 light pneumatic tools (drills up to 0.5 kW, grinders up to 0.75 kW). The 20-liter tank accumulates compressed air, leveling consumption peaks and reducing motor start cycles (less wear). The maximum pressure of 8 bar is standard for professional pneumatic tools. The noise level of 75 dB(A) is low for a workshop environment with multiple operators.\u003c\/p\u003e\n\u003ch2\u003eWho chooses it in Italy\u003c\/h2\u003e\n\u003cp\u003eJoiners and carpenters with a fixed workshop prefer it for its versatility in powering drills, grinders, and pneumatic sanders without the need for cylinders. Painting and restoration artisans request it for clean air without oil contamination (critical for painted finishes). Temporary construction sites use it as a central power supply for pneumatic tools on multiple work fronts simultaneously. Window and door installers require an oil-free compressor for cleaning aluminum profiles before assembly (oil damages anodization). In the Krollit catalog, it represents the compromise for those who need medium capacity without the complexity of oil maintenance.\u003c\/p\u003e\n\u003ch2\u003eWho is the Bernardo AC\/PRO\/500\/20 compressor suitable for?\u003c\/h2\u003e\n\u003ctable style=\"width: 99.915%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 21.2406%;\"\u003eProfile\u003c\/th\u003e\n\u003cth style=\"width: 14.9176%;\"\u003eSuitable?\u003c\/th\u003e\n\u003cth style=\"width: 63.2046%;\"\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 21.2406%;\"\u003eArtisan joiner \/ light carpentry\u003c\/td\u003e\n\u003ctd style=\"width: 14.9176%;\"\u003e\u003cstrong\u003eIdeal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 63.2046%;\"\u003e460 l\/min flow rate powers 2-3 light pneumatic tools simultaneously. Oil-free system simplifies maintenance. 20 L tank reduces motor start cycles. 34 kg weight manageable for a fixed workshop.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 21.2406%;\"\u003eTemporary construction site \/ window and door installer\u003c\/td\u003e\n\u003ctd style=\"width: 14.9176%;\"\u003e\u003cstrong\u003eIdeal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 63.2046%;\"\u003eClean, oil-free air protects paintwork and aluminum profiles. Sufficient flow rate for pneumatic tools on multiple fronts. 75 dB noise level contained for multi-operator environments. 8 bar pressure standard for nail guns and silicone guns.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 21.2406%;\"\u003eMechanical \/ industrial workshop with \u0026gt;5 tools\u003c\/td\u003e\n\u003ctd style=\"width: 14.9176%;\"\u003e\u003cstrong\u003eAdequate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 63.2046%;\"\u003e460 l\/min flow rate is a limit for simultaneous consumption of \u0026gt;3 heavy tools (air blowers, orbital sanders 1+ kW). For higher volumes, consider a 50-100 L compressor with a 3-5 kW motor. 8 bar pressure is sufficient but not for specialized tools requiring 10-12 bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eNot suitable for:\u003c\/strong\u003e Continuous industrial use 40+ hours\/week without motor change (machine sized for intermittent use). Heavy pneumatic tools \u0026gt;1.5 kW simultaneously (insufficient flow rate, risk of pressure drop). Mobile transport on a construction site without fixed connection (34 kg weight is manual limit).\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor type\u003c\/td\u003e\n\u003ctd\u003eSingle-phase asynchronous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e1.8 kW (2.4 HP\/PS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhases\u003c\/td\u003e\n\u003ctd\u003eSingle-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent draw\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor protection\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor speed\u003c\/td\u003e\n\u003ctd\u003e2,850 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStart-up\u003c\/td\u003e\n\u003ctd\u003eDirect (no declared soft-start)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation class\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eTank and compression capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank capacity\u003c\/td\u003e\n\u003ctd\u003e20 liters (horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e8 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended operating pressure\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer — typically 6-8 bar for standard pneumatic tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree air delivery (FAD)\u003c\/td\u003e\n\u003ctd\u003e460 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir flow at load (8 bar)\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety valve\u003c\/td\u003e\n\u003ctd\u003eYes (integrated in the tank)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure gauge\u003c\/td\u003e\n\u003ctd\u003eYes, integrated analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eCompressor and cylinder specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressor type\u003c\/td\u003e\n\u003ctd\u003eOil-free reciprocating piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of cylinders\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of compression stages\u003c\/td\u003e\n\u003ctd\u003e1 stage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinder diameter\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston stroke\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil-free system\u003c\/td\u003e\n\u003ctd\u003eYes — reduces compressed air contamination and maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir filter\u003c\/td\u003e\n\u003ctd\u003eIntegrated (specifications not declared)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eConstruction features\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank positioning\u003c\/td\u003e\n\u003ctd\u003eHorizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank material\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCorrosion protection\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir outlet connectors\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer — typically standard 1\/4\" pneumatic fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondensate drainage\u003c\/td\u003e\n\u003ctd\u003eIntegrated manual valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure regulator\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e820 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e34 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGross weight (with packaging)\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloor space\u003c\/td\u003e\n\u003ctd\u003e~500 × 420 mm (horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eAcoustic performance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise (sound pressure)\u003c\/td\u003e\n\u003ctd\u003e75 dB(A) at 1 meter distance — estimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise (sound power LWA)\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer — estimated 82-85 dB(A) for 1.8 kW motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eProtection and compliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCE marking\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer — presumably yes for EU machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplied standards\u003c\/td\u003e\n\u003ctd\u003eEN 286 (for pressure vessels) — not declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e24 months from date of purchase (standard Bernardo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eAustria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n\u003cbr\u003eStandard equipment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAC\/PRO\/500\/20 air compressor assembled and ready for use\u003c\/li\u003e\n\u003cli\u003e20-liter horizontal tank with integrated safety valve\u003c\/li\u003e\n\u003cli\u003e1.8 kW single-phase motor mounted\u003c\/li\u003e\n\u003cli\u003eIntegrated analog pressure gauge\u003c\/li\u003e\n\u003cli\u003eManual condensate drainage valve\u003c\/li\u003e\n\u003cli\u003eUser manual in Italian and German\u003c\/li\u003e\n\u003cli\u003eTechnical data sheet with maintenance instructions\u003c\/li\u003e\n\u003cli\u003eCE declaration of conformity (if included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: compressed air hose, pneumatic fittings, pressure regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many pneumatic tools can I connect simultaneously to the compressor?\u003c\/h3\u003e\n\u003cp\u003eDepends on tool power. 460 l\/min flow rate allows powering 2-3 light tools simultaneously (drills 0.3-0.5 kW, grinders 0.5-0.75 kW). For 4+ tools or heavy tools (sanders \u0026gt;1 kW), the flow rate becomes insufficient = pressure drop, reduced performance. Recommended to measure the consumption of specific tools.\u003c\/p\u003e\n\u003ch3\u003eDoes an oil-free compressor really reduce maintenance?\u003c\/h3\u003e\n\u003cp\u003eYes, significantly. An oil-free compressor eliminates oil changes (complexity and costs). Routine maintenance consists of: checking the air filter every 50 hours (cleaning or replacement), weekly condensate drainage (manual valve), checking pressure gauge. An oil compressor would require oil changes every 500-1,000 hours in addition to additional filtration.\u003c\/p\u003e\n\u003ch3\u003eCan I use the compressor for automotive spray painting?\u003c\/h3\u003e\n\u003cp\u003ePartially yes, but with caution. Oil-free air is a prerequisite. However, automotive painting requires forced air drying (filters up to 3 microns, refrigerated dryer) not declared on this model. For basic painting, it is suitable; for professional automotive finishes, consider adding an external dryer.\u003c\/p\u003e\n\u003ch3\u003eWhat is the recommended maximum duty cycle?\u003c\/h3\u003e\n\u003cp\u003eThe compressor is designed for intermittent use, not continuous. Recommended: maximum 4-6 hours\/day with breaks, not 24\/7. The 1.8 kW motor without soft-start starts directly = current peaks. For use \u0026gt;200 hours\/month, consider a larger compressor with soft start.\u003c\/p\u003e\n\u003ch3\u003eCan I move the compressor from one workshop to another?\u003c\/h3\u003e\n\u003cp\u003eYes, it is possible but with precautions. The 34 kg weight requires 1-2 people. Dimensions 500 × 420 × 820 mm must pass through doors\/stairs (measure entrance first). Before moving: completely discharge pressure, close isolation valve if present, secure tank to avoid damage. After moving, ventilate the compressor for 10 minutes before starting.\u003c\/p\u003e\n\u003ch3\u003eWhat compressed air hose should I use?\u003c\/h3\u003e\n\u003cp\u003ePneumatic rubber\/PVC hose with a minimum pressure of 10 bar (margin over 8 bar working pressure). Standard 1\/4\" fittings with male\/female quick connectors. Hose length: up to 50 m acceptable; beyond 50 m, significant pressure drop = loss of performance. Recommended a 20-30 m coiled hose with a reel for clean storage.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drain the tank at the end of the day?\u003c\/h3\u003e\n\u003cp\u003eRecommended for use in outdoor environments or exposed to humidity. Drain pressure via the drainage valve after work = reduces nocturnal condensate formation in the tank. For use in a covered workshop, less critical but good practice. Every 1-2 weeks, manually open the drainage valve and collect condensate (water collected in a saucer).\u003c\/p\u003e\n\u003ch3\u003eWhat is the actual noise during operation?\u003c\/h3\u003e\n\u003cp\u003e75 dB(A) is moderate noise (comparable to a loud normal conversation). Acceptable in a workshop with nearby operators without special protection, but hearing protection is recommended for continuous sessions \u0026gt;4 hours. For nearby residential environments, it may be annoying — consider sound-absorbing screens.\u003c\/p\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":53035372314952,"sku":"Z-70-1061","price":692.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_d_aria_senza_olio_Bernardo_AC_PRO_500_20V_F_W_art._Z-70-1061_1_8_kW_20_L.jpg?v=1777895915"},{"product_id":"compressore-aria-guede-airpower-180-08","title":"Güde Airpower 180\/08 Portable Air Compressor","description":"\u003cp\u003e\u003cstrong\u003eGüde Airpower 180\/08 Portable Air Compressor – 1100 W, 8 bar, 140 l\/min, portable oil-free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAirpower 180\/08\u003c\/strong\u003e is a portable air compressor specifically designed for those who occasionally need compressed air (tire inflation, light pneumatic tools, cleaning) without requiring accumulation in a pressure tank. Its \u003cstrong\u003etankless\u003c\/strong\u003e design makes it extremely compact (305 × 155 × 335 mm, 5.4 kg) – easily transportable in a car, garage, or construction site.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003esingle-cylinder oil-free\u003c\/strong\u003e motor eliminates the need for oil maintenance – the air delivered is clean, free of oil particles, suitable for sensitive pneumatic tools and painting. Unlike oil-lubricated compressors that require periodic oil changes, the oil-free system needs no special maintenance beyond filter cleaning.\u003c\/p\u003e\n\u003cp\u003eThe flow rate of \u003cstrong\u003e140 liters\/minute at zero pressure\u003c\/strong\u003e is adequate for intermittent inflation cycles (car tires, bicycles, balls, inflatable mattresses) and powering light pneumatic tools (90 W angle grinder, light pneumatic drill, 1\/2\" pneumatic wrench). The maximum pressure of \u003cstrong\u003e8 bar\u003c\/strong\u003e is a professional standard for almost all civil applications.\u003c\/p\u003e\n\u003cp\u003eDistinctive features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTankless\u003c\/strong\u003e – Extreme compactness. Absence of a tank reduces weight, bulk, and complexity. Air is delivered directly from the cylinder head with a pressure regulator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free motor\u003c\/strong\u003e – No oil changes, no condensate accumulation in the tank, clean air. Ideal for painting, precision work, sensitive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-cylinder with belt drive\u003c\/strong\u003e – Mechanical reliability, quiet operation vs. direct drive motors (97 dB(A) is moderate for the category).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140 l\/min flow rate\u003c\/strong\u003e – Adequate for rapid car tire inflation (3-5 minutes for 4 tires) and intermittent cycles of light tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 bar pressure\u003c\/strong\u003e – Professional standard, sufficient for car tires (2 bar), pneumatic tools (6-8 bar), compressed air cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight 5.4 kg\u003c\/strong\u003e – Superior handling. Easily transportable manually between workstations or stored in a car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete accessories\u003c\/strong\u003e – 2.5 m hose with quick coupling, blow gun, tire inflator, adapters for bicycles and inflatable mattresses, ready for use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCE + Q9 Certifications\u003c\/strong\u003e – European safety compliance. German Güde quality standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho chooses it in Italy\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIndividual operators and small craftsmen\u003c\/strong\u003e – Tire inflation for cars\/bicycles\/balls, operation of light pneumatic tools (grinder, drill, nail gun). Tankless compactness eliminates warehouse clutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCar repair shops and tire shops\u003c\/strong\u003e – Rapid tire inflation, pressure control with integrated manometer. 140 l\/min flow rate is suitable for intermittent cycles in small-medium workshops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePainting and cleaning craftsmen\u003c\/strong\u003e – Oil-free system guarantees clean air for spray guns and compressed air cleaning. The absence of oil is a fundamental advantage for finishing work.\u003c\/p\u003e\n\u003ch3\u003eAfter-sales support and compatibility\u003c\/h3\u003e\n\u003cp\u003eKrollit supplies original Güde spare parts for the Airpower 180\/08 with average delivery times of 5-7 working days:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-cylinder replacement motor\u003c\/li\u003e\n\u003cli\u003eReplacement pump\/compressor\u003c\/li\u003e\n\u003cli\u003eReplacement belt drive\u003c\/li\u003e\n\u003cli\u003eReplacement pressure regulator\u003c\/li\u003e\n\u003cli\u003eReplacement air filter\u003c\/li\u003e\n\u003cli\u003eReplacement air hose (2.5 m with quick coupling)\u003c\/li\u003e\n\u003cli\u003eReplacement blow gun\u003c\/li\u003e\n\u003cli\u003eReplacement tire inflator\u003c\/li\u003e\n\u003cli\u003eReplacement valve adapter set\u003c\/li\u003e\n\u003cli\u003eManual in Italian and technical data sheet available in PDF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWho is the Airpower 180\/08 suitable for?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eSuitable?\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual operator \/ small craftsman\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eTankless compactness, occasional inflation, 140 l\/min flow rate sufficient for intermittent cycles, easily transportable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCar repair shop \/ tire shop\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eRapid tire inflation, pressure control, compactness does not require dedicated space for a large compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePainting \/ cleaning craftsman\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eOil-free system ensures clean air, no oil contamination on painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eNot suitable for:\u003c\/strong\u003e Continuous industrial production cycles (frequent charge\/discharge pressure wears out the motor); heavy pneumatic tools (grinder 500 W+, pneumatic lathe) requiring \u0026gt;200 l\/min flow rate; environments requiring \u0026gt;8 bar pressure; scenarios requiring air accumulation in a tank (for discontinuous high-flow cycles).\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ch3\u003eCompression performance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003cth\u003e8 bar\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended working pressure\u003c\/td\u003e\n\u003ctd\u003e6-7 bar (for standard pneumatic tools)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate at 0 bar\u003c\/td\u003e\n\u003ctd\u003e140 liters\/minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate at 4 bar\u003c\/td\u003e\n\u003ctd\u003e80 liters\/minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate at 7 bar\u003c\/td\u003e\n\u003ctd\u003e60 liters\/minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake flow rate\u003c\/td\u003e\n\u003ctd\u003e180 liters\/minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEngine and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor power\u003c\/th\u003e\n\u003cth\u003e1100 W\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e230 V single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum current\u003c\/td\u003e\n\u003ctd\u003e16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor speed\u003c\/td\u003e\n\u003ctd\u003e3400 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressor speed\u003c\/td\u003e\n\u003ctd\u003e3400 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor type\u003c\/td\u003e\n\u003ctd\u003eSingle-cylinder with belt drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection class\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP protection rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating type\u003c\/td\u003e\n\u003ctd\u003eS3 (intermittent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eCompression system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem type\u003c\/th\u003e\n\u003cth\u003eOil-free\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinders\u003c\/td\u003e\n\u003ctd\u003e1 cylinder (single-cylinder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure tank\u003c\/td\u003e\n\u003ctd\u003eAbsent – air delivered directly from cylinder head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure regulator\u003c\/td\u003e\n\u003ctd\u003eIntegrated, 0-8 bar adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety valve\u003c\/td\u003e\n\u003ctd\u003eIntegrated at 8.8 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir filter\u003c\/td\u003e\n\u003ctd\u003eInlet, replacement recommended every 500 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir fitting\u003c\/td\u003e\n\u003ctd\u003e1 threaded 1\/4\" fitting with quick coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAccessories and equipment\u003c\/h3\u003e\n\u003ctable style=\"width: 99.915%; height: 117.614px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003cth style=\"width: 36.6103%; height: 19.6023px;\"\u003eAir hose\u003c\/th\u003e\n\u003cth style=\"width: 60.8212%; height: 19.6023px;\"\u003e2.5 meters with quick coupling\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 36.6103%; height: 19.6023px;\"\u003eBlow gun\u003c\/td\u003e\n\u003ctd style=\"width: 60.8212%; height: 19.6023px;\"\u003eIncluded \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 36.6103%; height: 19.6023px;\"\u003eTire inflator\u003c\/td\u003e\n\u003ctd style=\"width: 60.8212%; height: 19.6023px;\"\u003eIncluded \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 36.6103%; height: 19.6023px;\"\u003eBall valve needle\u003c\/td\u003e\n\u003ctd style=\"width: 60.8212%; height: 19.6023px;\"\u003eIncluded \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 36.6103%; height: 19.6023px;\"\u003eBicycle adapter\u003c\/td\u003e\n\u003ctd style=\"width: 60.8212%; height: 19.6023px;\"\u003eIncluded \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 36.6103%; height: 19.6023px;\"\u003eMattress adapter\u003c\/td\u003e\n\u003ctd style=\"width: 60.8212%; height: 19.6023px;\"\u003eIncluded \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eConstruction and design\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L × W × H)\u003c\/th\u003e\n\u003cth\u003e305 × 155 × 335 mm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e5.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGross weight (packaging)\u003c\/td\u003e\n\u003ctd\u003e5.94 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower cable\u003c\/td\u003e\n\u003ctd\u003eH05VV-F, 190 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e190 centimeters (1.9 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eAcoustics\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSound pressure level LWA\u003c\/th\u003e\n\u003cth\u003e97 dB(A)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound pressure level LPA\u003c\/td\u003e\n\u003ctd\u003e75.6 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcoustic note\u003c\/td\u003e\n\u003ctd\u003eModerate for portable compressor category (85-100 dB(A) is typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCE Mark\u003c\/th\u003e\n\u003cth\u003eYes – Machinery Directive 2006\/42\/EC\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eQ9 Certification\u003c\/td\u003e\n\u003ctd\u003eYes – German Güde quality standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirpower Brand\u003c\/td\u003e\n\u003ctd\u003eYes – Güde specialized brand for compressors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil-free Mark\u003c\/td\u003e\n\u003ctd\u003eYes – Oil-free system declaration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGüde article number\u003c\/td\u003e\n\u003ctd\u003e50077\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e4015671201614\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlace of manufacture\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n\u003cbr\u003eStandard equipment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Airpower 180\/08 air compressor\u003c\/li\u003e\n\u003cli\u003e1100 W single-cylinder motor with belt drive\u003c\/li\u003e\n\u003cli\u003eCylinder head with integrated pressure regulator\u003c\/li\u003e\n\u003cli\u003e8.8 bar safety valve\u003c\/li\u003e\n\u003cli\u003eInlet air filter\u003c\/li\u003e\n\u003cli\u003e2.5 meter air hose with quick coupling\u003c\/li\u003e\n\u003cli\u003eBlow gun \u003c\/li\u003e\n\u003cli\u003eTire inflator \u003c\/li\u003e\n\u003cli\u003eBall inflation needle \u003c\/li\u003e\n\u003cli\u003eBicycle valve adapter \u003c\/li\u003e\n\u003cli\u003eInflatable mattress valve adapter \u003c\/li\u003e\n\u003cli\u003e230V power cable 190 cm\u003c\/li\u003e\n\u003cli\u003eManual in German\u003c\/li\u003e\n\u003cli\u003eSafety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the maximum flow rate of the Airpower 180\/08 and what pneumatic tool can it power?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e140 liters\/minute\u003c\/strong\u003e at zero pressure is the maximum flow rate. At 6 bar working pressure (standard for pneumatic tools), the flow rate drops to approximately 100 l\/min. Compatible tools: 90W angle grinder (consumes 60-80 l\/min), light pneumatic drill (30-50 l\/min), 1\/2\" pneumatic wrench (80-120 l\/min), light nail gun (30-40 l\/min). Heavy tools (\u0026gt;200 l\/min) require larger capacity tank compressors.\u003c\/p\u003e\n\u003ch3\u003eWhat is the advantage of a tankless compressor compared to one with a tank?\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003etankless\u003c\/strong\u003e compressor is much more compact (305×155×335 mm vs. over 900×600×1000 mm for tank models), lighter (5.4 kg vs. 80+ kg), does not require tank maintenance (condensate draining, pressure checks), and takes up little space in a garage\/workshop. Disadvantages: delivered flow rate decreases rapidly with increasing pressure; for continuous cycles of heavy tools, a tank is better (accumulates air, stabilizes flow rate).\u003c\/p\u003e\n\u003ch3\u003eWhat does \"oil-free\" mean and what is the advantage?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOil-free\u003c\/strong\u003e means the compression system does not use lubricating oil – the air delivered is clean, free of oil particles. Advantages: (1) No oil changes (reduces maintenance), (2) No condensate\/oil in the tank (not applicable here), (3) Clean air ideal for painting and precision work. Disadvantage: oil-free compressors have faster seal wear with intensive cycles (\u0026gt;2000 hours).\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum pressure and what is the recommended working pressure?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e8 bar\u003c\/strong\u003e is the theoretical maximum pressure. The recommended working pressure for standard pneumatic tools is \u003cstrong\u003e6-7 bar\u003c\/strong\u003e. At 8 bar, the 8.8 bar safety valve activates and releases pressure. Car tires require 2-2.5 bar; light tools work well at 5-6 bar; heavy tools need 7-8 bar.\u003c\/p\u003e\n\u003ch3\u003eHow long does the Airpower 180\/08 take to inflate a car tire from empty?\u003c\/h3\u003e\n\u003cp\u003eAverage time is \u003cstrong\u003e3-5 minutes to inflate 4 car tires\u003c\/strong\u003e (from 0 to 2.5 bar, total capacity ~100 liters). Time depends on initial tire pressure and set pressure regulator. At 2.5 bar and ~130 l\/min flow rate, the theoretical calculation is: 100 l ÷ 130 l\/min = 0.77 minutes per tire. Actual time is longer (5-6 minutes total) due to regulator effects and hose connection.\u003c\/p\u003e\n\u003ch3\u003eIs the power cable long enough to reach distances?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ecable is 190 centimeters\u003c\/strong\u003e (1.9 meters) – a modest length. If the power outlet is far away, an \u003cstrong\u003eindustrial extension cord of 20-30 m\u003c\/strong\u003e is advisable to avoid damaging the original cable. Avoid long extension cords (\u0026gt;50 m) as they reduce supply voltage.\u003c\/p\u003e\n\u003ch3\u003eHow do you maintain the air filter?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eair filter\u003c\/strong\u003e requires inspection every 50-100 operating hours, cleaning every 200-300 hours, and replacement every 500 hours if used frequently. Cleaning: turn off the compressor, remove the air filter from the casing, blow compressed air from the inside outwards (never from the outside inwards to avoid clogging). If the filter does not clean with compressed air, replace it.\u003c\/p\u003e\n\u003ch3\u003eWhat is the noise level and is it acceptable for domestic use?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e97 dB(A)\u003c\/strong\u003e is the sound pressure level – equivalent to the noise of a bench drill or grinder. It is not silent, but tolerable for intermittent use in a garage\/workshop. For prolonged use (\u0026gt;1 hour), hearing protection (noise-canceling headphones 80-85 dB(A) reduce by 5-15 dB) is recommended. If in sensitive environments (neighbors, residential areas), limit use to daytime hours.\u003c\/p\u003e","brand":"Guede","offers":[{"title":"Default Title","offer_id":53107273662792,"sku":"50077","price":91.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Compressore_d_aria_G_de_Airpower_180_08_1100_W_8_bar_140_l_min_portatile_oil-free_senza_serbatoio.jpg?v=1778853824"},{"product_id":"pompa-cisterna-acqua-piovana-batteria-guede-rfp-12-201-04","title":"Güde RFP 12-201-04 Battery Rainwater Tank Pump","description":"\u003cp\u003e\u003cstrong\u003eGüde RFP 12-201-04 Battery-Powered Rainwater Tank Pump – 1500 l\/h, 11 m, Li-Ion 12V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRFP 12-201-04 pump\u003c\/strong\u003e is a specialized solution for domestic and semi-industrial rainwater harvesting systems. Unlike traditional submersible pumps, the RFP 12-201-04 is \u003cstrong\u003eself-contained\u003c\/strong\u003e – powered by an integrated lithium battery, it does not require a 230V mains power connection. Ideal for cellars, gardens, basements where a power outlet is not available, or for emergency situations (flooding, power outages).\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003etelescopic tube, adjustable from 540 to 1000 mm\u003c\/strong\u003e, adapts to any tank or well depth without the need for external tube extensions. The flow rate of \u003cstrong\u003e1500 liters\/hour\u003c\/strong\u003e is adequate for draining medium rainwater collection tanks or for intermittently supplying garden irrigation systems. The head of \u003cstrong\u003e11 meters\u003c\/strong\u003e allows water to be transported up to 11 meters of vertical height.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003edry-running protection\u003c\/strong\u003e automatically deactivates the pump if the tank empties, protecting the pump from cavitation damage. The \u003cstrong\u003ebattery charge status indicator\u003c\/strong\u003e (visual LED) allows the operator to constantly check the available charge without external instruments. Battery charging time: \u003cstrong\u003e360 minutes (6 hours)\u003c\/strong\u003e via the included charger.\u003c\/p\u003e\n\u003cp\u003eDistinctive features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V, 2.0 Ah lithium battery\u003c\/strong\u003e – Total autonomy from the mains. Ideal for cellars, gardens, remote areas without power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow rate 1500 liters\/hour\u003c\/strong\u003e – Efficient drainage of medium tanks, intermittent garden irrigation cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11-meter head\u003c\/strong\u003e – Water transport up to 11 m vertical height. Adequate for rising from cellar to roof or from garden to terrace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelescopic tube 540-1000 mm\u003c\/strong\u003e – Depth adjustment without external extensions. Automatic adaptability to different tank depths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-running protection\u003c\/strong\u003e – Automatic shutdown if water level drops below the suction tube. Protects pump from cavitation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge status indicator\u003c\/strong\u003e – Visual LED shows available battery charge. No other instrumentation needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-240V charger included\u003c\/strong\u003e – Charges from any global outlet (adaptable voltage). Charging time: 6 hours from an empty battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated shut-off valve\u003c\/strong\u003e – Manual blocking of water flow without disconnecting the hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight 1.4 kg\u003c\/strong\u003e – Superior handling. Easily transportable and positionable in the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCE + GS + Q9 + TÜV certifications\u003c\/strong\u003e – European safety compliance. German Güde quality standard. Recognized TÜV mark.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho chooses it in Italy\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHomeowners with rainwater harvesting systems\u003c\/strong\u003e – Rainwater recovery systems for garden irrigation, outdoor cleaning, toilet flushing. Autonomous pump does not require a permanent electrical connection, easily movable between seasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGardeners and landscapers\u003c\/strong\u003e – Intermittent irrigation of vegetable gardens, gardens, nurseries. Battery offers autonomy for drainage and pumping cycles without the need for electrical infrastructure in the garden.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmall farms\u003c\/strong\u003e – Rainwater harvesting for pasture irrigation, animal troughs, yard cleaning. Economical solution without dedicated electrical line installation.\u003c\/p\u003e\n\u003ch3\u003eAfter-sales support and compatibility\u003c\/h3\u003e\n\u003cp\u003eKrollit provides original Güde spare parts for the RFP 12-201-04 with an average delivery time of 5-7 working days:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement 12V 2.0 Ah (24 Wh) lithium battery\u003c\/li\u003e\n\u003cli\u003eReplacement 100-240V charger\u003c\/li\u003e\n\u003cli\u003eReplacement pump\u003c\/li\u003e\n\u003cli\u003eReplacement motor\u003c\/li\u003e\n\u003cli\u003eReplacement telescopic tube\u003c\/li\u003e\n\u003cli\u003eReplacement shut-off valve\u003c\/li\u003e\n\u003cli\u003eReplacement sealing gaskets (kit)\u003c\/li\u003e\n\u003cli\u003eReplacement dry-running protection sensor\u003c\/li\u003e\n\u003cli\u003eManual in Italian and technical data sheet available in PDF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho the RFP 12-201-04 is suitable for\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eSuitable?\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHomeowner with rainwater harvesting tank\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eBattery autonomy eliminates electrical connection. Telescopic tube adapts to different tanks. Dry-running protection preserves pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGardener \/ landscaper\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eIntermittent garden\/vegetable patch irrigation, 1500 l\/h flow rate adequate, battery offers seasonal autonomy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall farm\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eRainwater harvesting for pasture irrigation. If frequent intensive cycles (\u003e10 hours\/day), check battery life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eNot suitable for:\u003c\/strong\u003e Intensive continuous cycles requiring \u003e6 hours of daily operation (battery drains in 6-8 hours of continuous use); draining flooded basements (for this, use more powerful 230V submersible pumps); areas with ambient temperature \u003c0°C (lithium battery performs poorly at freezing temperatures); pumping saltwater (rapid erosion of battery circuits).\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ch3\u003ePumping performance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow rate\u003c\/th\u003e\n\u003cth\u003e1500 liters\/hour\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate in liters\/minute\u003c\/td\u003e\n\u003ctd\u003e25 liters\/minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate in m³\/hour\u003c\/td\u003e\n\u003ctd\u003e1.5 m³\/hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum head\u003c\/td\u003e\n\u003ctd\u003e11 m (meters water column)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum immersion depth\u003c\/td\u003e\n\u003ctd\u003eApproximately 10 meters (telescopic tube length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eBattery and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery type\u003c\/th\u003e\n\u003cth\u003eLithium-ion (Li-Ion)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery capacity\u003c\/td\u003e\n\u003ctd\u003e2.0 Ah (ampere-hour)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery energy\u003c\/td\u003e\n\u003ctd\u003e24 Wh (watt-hour)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet battery weight\u003c\/td\u003e\n\u003ctd\u003e0.19 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull charge time\u003c\/td\u003e\n\u003ctd\u003e360 minutes (6 hours)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous operating time\u003c\/td\u003e\n\u003ctd\u003e6-8 hours (depends on the head used)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntermittent cycle autonomy\u003c\/td\u003e\n\u003ctd\u003e1-2 weeks (with 2-3 pumping cycles daily)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eIntegrated charger\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003cth\u003e100-240 V (global universal)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput frequency\u003c\/td\u003e\n\u003ctd\u003e50-60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage\u003c\/td\u003e\n\u003ctd\u003e13.5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput current\u003c\/td\u003e\n\u003ctd\u003e0.4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger protection class\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eProprietary Güde connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003ePump and motor\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor power\u003c\/th\u003e\n\u003cth\u003e24 Wh (from 12V battery)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor type\u003c\/td\u003e\n\u003ctd\u003eBLDC motor (brushless)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor speed\u003c\/td\u003e\n\u003ctd\u003eNot declared by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum water temperature\u003c\/td\u003e\n\u003ctd\u003e35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePermitted water type\u003c\/td\u003e\n\u003ctd\u003eRainwater, fresh water, tank water (not salt water)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum particle size\u003c\/td\u003e\n\u003ctd\u003e0.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eStructure and controls\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction tube\u003c\/th\u003e\n\u003cth\u003eTelescopic, adjustable 540-1000 mm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDischarge connection\u003c\/td\u003e\n\u003ctd\u003eInternal 3\/4\" thread (AG 3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry-running protection\u003c\/td\u003e\n\u003ctd\u003eYes – automatic shutdown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery charge status indicator\u003c\/td\u003e\n\u003ctd\u003eYes – 3-level visual LED (full\/medium\/low)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShut-off valve\u003c\/td\u003e\n\u003ctd\u003eYes – manual shut-off valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor protection class\u003c\/td\u003e\n\u003ctd\u003eIII (portable battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eConstruction and design\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall dimensions (L × W × H)\u003c\/th\u003e\n\u003cth\u003e180 × 80 × 980 mm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet pump weight\u003c\/td\u003e\n\u003ctd\u003e1.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003eImpact-resistant plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTelescopic tube material\u003c\/td\u003e\n\u003ctd\u003eSteel\/plastic (elastomer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable style=\"width: 99.915%; height: 137.216px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003cth style=\"width: 27.923%; height: 19.6023px;\"\u003eCE mark\u003c\/th\u003e\n\u003cth style=\"width: 69.5086%; height: 19.6023px;\"\u003eYes – Machinery Directive 2006\/42\/EC\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 27.923%; height: 19.6023px;\"\u003eGS certification\u003c\/td\u003e\n\u003ctd style=\"width: 69.5086%; height: 19.6023px;\"\u003eYes – TÜV (certified safety)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 27.923%; height: 19.6023px;\"\u003eQ9 certification\u003c\/td\u003e\n\u003ctd style=\"width: 69.5086%; height: 19.6023px;\"\u003eYes – German Güde quality standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 27.923%; height: 19.6023px;\"\u003eTÜV mark\u003c\/td\u003e\n\u003ctd style=\"width: 69.5086%; height: 19.6023px;\"\u003eYes – TÜV Dreieck Qualitätszeichen (TÜV quality mark)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 27.923%; height: 19.6023px;\"\u003eGüde item number\u003c\/td\u003e\n\u003ctd style=\"width: 69.5086%; height: 19.6023px;\"\u003e58492\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 27.923%; height: 19.6023px;\"\u003eGTIN\u003c\/td\u003e\n\u003ctd style=\"width: 69.5086%; height: 19.6023px;\"\u003e4015671968265\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 27.923%; height: 19.6023px;\"\u003ePlace of manufacture\u003c\/td\u003e\n\u003ctd style=\"width: 69.5086%; height: 19.6023px;\"\u003e Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n\u003cbr\u003eStandard equipment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete RFP 12-201-04 battery-powered rainwater tank pump\u003c\/li\u003e\n\u003cli\u003eIntegrated BLDC motor\u003c\/li\u003e\n\u003cli\u003eAdjustable telescopic tube 540-1000 mm\u003c\/li\u003e\n\u003cli\u003e12V 2.0 Ah (24 Wh) lithium-ion battery\u003c\/li\u003e\n\u003cli\u003eUniversal 100-240V charger\u003c\/li\u003e\n\u003cli\u003eIntegrated shut-off valve\u003c\/li\u003e\n\u003cli\u003eBattery charge status indicator (LED)\u003c\/li\u003e\n\u003cli\u003eIntegrated dry-running protection\u003c\/li\u003e\n\u003cli\u003e3\/4\" threaded connector for discharge hose\u003c\/li\u003e\n\u003cli\u003eManual in German\u003c\/li\u003e\n\u003cli\u003eSafety data sheet\u003c\/li\u003e\n\u003cli\u003eCharger connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the flow rate of the RFP 12-201-04 and how long does it take to drain a medium tank?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1500 liters\/hour\u003c\/strong\u003e is equivalent to 25 liters per minute. For a medium 500-liter tank, theoretical drainage time: 500 l ÷ 25 l\/min = 20 minutes. For 1000 liters: 40 minutes. Actual time depends on the head (if the tank is 5 meters below the discharge point, the effective flow rate drops to ~800 l\/h, doubling the times).\u003c\/p\u003e\n\u003ch3\u003eHow long does the lithium battery last during continuous operation?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e2.0 Ah 12V (24 Wh)\u003c\/strong\u003e battery lasts approximately \u003cstrong\u003e6-8 hours of continuous operation\u003c\/strong\u003e depending on the head used. For intermittent use (10-15 minute cycles with breaks), a charge lasts \u003cstrong\u003e1-2 weeks\u003c\/strong\u003e of light daily use. Full charging time: 360 minutes (6 hours) via the included charger.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum head of 11 meters and how does it affect flow rate?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e11-meter head\u003c\/strong\u003e is the maximum height to which the pump pushes water vertically. At zero head (horizontal discharge pipe), the flow rate is a maximum of 1500 l\/h; at 5 meters height, the flow rate drops to ~1000 l\/h; at 11 meters, the flow rate drops to ~200 l\/h (operating limit). For uphill applications (low tank to high terrace), evaluate the specific head required.\u003c\/p\u003e\n\u003ch3\u003eWhat is the advantage of the adjustable telescopic tube?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003etelescopic tube 540-1000 mm\u003c\/strong\u003e eliminates the need for external extensions. If the tank is 700 mm deep, the tube adjusts automatically without cutting or adding sections. Adjustment: (1) empty the tank, (2) extend\/compress the tube to the desired length, (3) fix with locking rings. No special tools are needed.\u003c\/p\u003e\n\u003ch3\u003eWhat does \"dry-running protection\" mean and why is it important?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDry-running protection\u003c\/strong\u003e automatically deactivates the pump when the water level in the tank drops below the suction tube inlet. If it weren't present: the pump would suck in air, causing cavitation (air bubbles in the circuit), damaging seals and the motor. The integrated sensor detects when suction is only air, shutting down the pump and protecting it from permanent damage.\u003c\/p\u003e\n\u003ch3\u003eIs the supplied charger compatible with any worldwide outlet?\u003c\/h3\u003e\n\u003cp\u003eYes, the charger accepts \u003cstrong\u003e100-240V, 50-60 Hz\u003c\/strong\u003e – compatible with any worldwide outlet (Europe, North America, Japan, Australia, etc.). If traveling abroad for the first time, a simple mechanical adapter for the outlet is sufficient (a voltage converter is not needed).\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum immersion depth of the pump?\u003c\/h3\u003e\n\u003cp\u003eThe pump can be immersed up to approximately \u003cstrong\u003e4 meters\u003c\/strong\u003e (the telescopic tube is a maximum of 1 meter long, so up to 1 meter from the bottom + pump body below). If the tank is very deep (\u003e4 m), consider professional submersible pumps. Dry-running protection prevents damage if the tank empties during a cycle.\u003c\/p\u003e\n\u003ch3\u003eIs the lithium battery safe and what is its lifespan?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGüde lithium-ion battery\u003c\/strong\u003e is CE and GS certified. Estimated lifespan: \u003cstrong\u003e500-1000 charge-discharge cycles\u003c\/strong\u003e (1.5-3 years with moderate daily use). After 1 year, capacity drops to ~90% of original; after 2 years, to ~80%. Storage: if not used for \u003e3 months, recharge at least once a month to preserve the chemical health of the lithium cell.\u003c\/p\u003e","brand":"Guede","offers":[{"title":"Default Title","offer_id":53107417481544,"sku":"58492","price":77.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pompa_cisterna_acqua_piovana_batteria_G_de_RFP_12-201-04_1500_l_h_11_m_tubo_telescopico_regolabile.jpg?v=1778854853"},{"product_id":"chiodatrice-pneumatica-gude","title":"Güde Pneumatic Nailer","description":"\u003cp\u003eGüde 40220 is a pneumatic stapler-nailer for professional and hobbyist-professional use, with an operating pressure of 6 bar, staples up to 40 mm leg length and nails up to 50 mm, 1\/4\" IG threaded connection. Distributed in Italy by Krollit, official Güde distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating pressure: 6 bar\u003c\/li\u003e\n\u003cli\u003eConnection: 1\/4\" internal thread\u003c\/li\u003e\n\u003cli\u003eStaple gauge: 1 mm\u003c\/li\u003e\n\u003cli\u003eMaximum staple leg length: 40 mm\u003c\/li\u003e\n\u003cli\u003eStaple width: 5.8 mm\u003c\/li\u003e\n\u003cli\u003eNail gauge: 1.05 mm\u003c\/li\u003e\n\u003cli\u003eMaximum nail length: 50 mm\u003c\/li\u003e\n\u003cli\u003eNail head thickness: 2 mm\u003c\/li\u003e\n\u003cli\u003eTool dimensions: 250 × 60 × 266 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 1.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho is the Güde 40220 for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpholsterers and sofa artisans\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eStaples up to 40 mm leg length for attaching fabrics and padding to wooden frames\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhibition fitters and interior decorators\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eWeight of 1.4 kg and length of 250 mm allow for prolonged work on walls and false ceilings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation and vapor barrier installers\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eNails up to 50 mm for anchoring insulation sheets and membranes to wood or plasterboard structures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal carpentry or steel processing\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eTool designed exclusively for staples and nails on wooden materials, plasterboard, and insulation sheets — not suitable for metal materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e structural fixings on masonry or hard surfaces; applications requiring full-head nails or staples with a width other than 5.8 mm.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePneumatic connection\u003c\/td\u003e\n\u003ctd\u003e1\/4\" internal thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating pressure\u003c\/td\u003e\n\u003ctd\u003e6 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e6 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStaple gauge\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStaple width\u003c\/td\u003e\n\u003ctd\u003e5.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum staple leg length\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNail gauge\u003c\/td\u003e\n\u003ctd\u003e1.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNail head thickness\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum nail length\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool length\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool width\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool height\u003c\/td\u003e\n\u003ctd\u003e266 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage weight\u003c\/td\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGüde item number\u003c\/td\u003e\n\u003ctd\u003e40220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e4015671402202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRigid carrying case\u003c\/li\u003e\n\u003cli\u003eSafety shock absorber\u003c\/li\u003e\n\u003cli\u003eOil bottle\u003c\/li\u003e\n\u003cli\u003e2 Allen wrenches\u003c\/li\u003e\n\u003cli\u003e500 staples 20 mm\u003c\/li\u003e\n\u003cli\u003e500 staples 32 mm\u003c\/li\u003e\n\u003cli\u003e500 staples 40 mm\u003c\/li\u003e\n\u003cli\u003e1,000 nails 25 mm\u003c\/li\u003e\n\u003cli\u003e1,000 nails 40 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat type of compressor is needed to operate the Güde 40220?\u003c\/h3\u003e\n\u003cp\u003eThe Güde 40220 requires a compressor capable of delivering at least 6 bar of pressure with a 1\/4\" threaded connection. Virtually any portable compressor with a 6-10 liter tank and this pressure is sufficient for the intermittent use typical of upholsterers and fitters.\u003c\/p\u003e\n\u003cp\u003eFor continuous work on large surfaces (false ceilings, building walls), a compressor with at least a 24-liter tank is recommended to avoid frequent restart cycles. The connection fitting is a standard 1\/4\" IG, compatible with almost all pneumatic accessories on the market.\u003c\/p\u003e\n\u003ch3\u003eWhat staples and nails can be used with the Güde 40220 in addition to the included kit?\u003c\/h3\u003e\n\u003cp\u003eThe Güde 40220 accepts staples with a gauge of 1 mm, a width of 5.8 mm, and a leg length of up to 40 mm, and nails with a gauge of 1.05 mm and a length of up to 50 mm. The included kit covers the most common sizes: 20, 32, and 40 mm staples, 25 and 40 mm nails.\u003c\/p\u003e\n\u003cp\u003eFor refills, it is necessary to verify that the replacement staples comply with the 5.8 mm width – a specific measurement that is not universal. Staples with a width of 6 mm or different are not compatible with this magazine. Krollit can supply compatible consumables: contact the Monteforte Irpino (AV) warehouse at +39 0825-1494022 to check availability.\u003c\/p\u003e\n\u003ch3\u003eHow does the safety lock of the Güde 40220 work?\u003c\/h3\u003e\n\u003cp\u003eThe Güde 40220 is equipped with an impact safety lock that prevents accidental ejection of staples or nails. The tool activates only when the tip is pressed against the work surface in combination with the trigger pressure.\u003c\/p\u003e\n\u003cp\u003eThis dual-safety system – contact pressure plus manual activation – is standard for pneumatic staplers intended for professional use. It reduces the risk of accidental ejection during movement or position changes, a frequent condition in setup work on ladders or scaffolding.\u003c\/p\u003e\n\u003ch3\u003eIs the Güde 40220 suitable for fixing plasterboard panels to metal structures?\u003c\/h3\u003e\n\u003cp\u003eNo. The Güde 40220 is designed for staples and nails on wooden materials, plasterboard on wooden substructures, and insulation sheets. It is not suitable for drilling or penetrating steel or aluminum profiles.\u003c\/p\u003e\n\u003cp\u003eFor fixing plasterboard to metal structures (C or U type steel profiles), a specific plasterboard screwdriver or a self-tapping screw is required. The Güde 40220 works correctly for laying panels on wooden battens, on wooden frameworks for false ceilings, and for fixing vapor barrier membranes and insulation sheets to wooden structures.\u003c\/p\u003e\n\u003ch3\u003eWhat maintenance does the Güde 40220 require?\u003c\/h3\u003e\n\u003cp\u003eRoutine maintenance consists of periodic oiling of the pneumatic mechanism with the oil included in the kit. It is advisable to add 2-3 drops of oil into the fitting before each prolonged use session.\u003c\/p\u003e\n\u003cp\u003eAfter each use, it is useful to release the pressure from the tool before storing it in its case. The magazine should be cleaned of dust residue or wood splinters that could block the staple feed. In case of jamming, the 2 Allen wrenches included in the kit allow the magazine to be opened for removal of jammed material without the need for additional tools.\u003c\/p\u003e","brand":"Guede","offers":[{"title":"Default Title","offer_id":53151864848712,"sku":"40220","price":38.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Cucitrice-chiodatrice_pneumatica_G_de_40220_con_valigetta_di_trasporto.webp?v=1779438727"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/collections\/1745845011723blob.png?v=1756738223","url":"https:\/\/www.krollit.com\/collections\/aria-compressa.oembed","provider":"Krollit","version":"1.0","type":"link"}