IGM Silicone Glue Roller Kit – Ø 20 mm with Titebond glue of your choice

2026-04-30T12:40:01+02:00

Vendor: Titebond
Type: Wood glue
Price: 15.37

IGM Silicone Glue Applicator Roller Kit – Ø 20 mm, 47 mm width, grooves for even distribution, with Titebond glue of choice

The IGM silicone glue applicator roller is an accessory for hobbyist-professional use, consisting of a silicone roller with Ø 20 mm and 47 mm width, featuring angled grooves to retain glue and ensure even distribution without excess, and a silicone tray with front cut-outs for collecting excess glue. The design, free of protruding parts, allows application right up to the edge of the workpiece without damaging the material. Available in a combo with Titebond glue of your choice: Original D2, II Premium D3, or III Ultimate D4. Distributed in Italy by Krollit, official IGM and Titebond distributor since 2007.

Roller diameter: Ø 20 mm

Roller width: 47 mm

Angled grooves: retain glue on the roller, reduce dripping

Application up to the edge: design without protruding parts

Silicone tray with front cut-outs: collects excess glue and provides roller rest

Roller and tray material: silicone

Cleaning: warm water or dry peeling

Glue included: Titebond of choice (selectable variant)

Which Titebond glue to choose for your use

The combo is available with three Titebond glue variants. The choice depends on the application environment and the required water resistance level.

Glue | EN 204 Class | Use | Open time | Min. application temp. | When to choose it
Titebond Original | D2 | Interior only | max 5 min | 10°C | Interior joinery, furniture, stairs, parquet: high initial tack, fast clamping, yellow color after drying
Titebond II Premium | D3 | Interior and exterior | max 5 min | 13°C | Window frames, outdoor furniture, structures exposed to occasional humidity: only D3 single-color glue certified EN 204, compatible with RF and hot press systems
Titebond III Ultimate | D4 | Interior and exterior | max 10 min | 8°C | Prolonged water exposure, cutting boards and food-contact products, outdoor construction: resistance to mold, solvents, and heat, applicable at low temperatures

Who is this kit for

Profile | Compatibility | Reason
Carpenter gluing large surfaces (panels, sides, tops) | Suitable | The 47 mm width and angled grooves distribute glue in a uniform layer on flat surfaces in a single pass, reducing spreading time compared to a flat brush
Hobbyist with veneering or panel assembly work | Suitable | The design without protruding parts allows application right up to the edge of the panel without leaving uncovered areas or damaging the material; the tray limits waste on small quantities of glue
Application in holes, deep mortises or narrow grooves | Not indicated | The Ø 20 mm diameter and 47 mm width make the roller suitable for flat and wide surfaces; for cylindrical holes, mortises, and narrow grooves, the IGM tip applicator kit is the correct tool

Not suitable for: application of expanding polyurethane glues, two-component epoxy glues, or solvent-based contact glues, as cleaning the silicone roller with water is not feasible with these.

Technical specifications

IGM roller kit

Roller diameter | Ø 20 mm
Roller width | 47 mm
Grooves | Angled, to retain glue and reduce dripping
Application up to the edge | Yes (design without protruding parts)
Tray | Silicone with front cut-outs for glue recovery
Roller and tray material | Silicone
Cleaning | Warm water or dry peeling after drying

Titebond Original – technical parameters (D2)

Type | Alkyl resin in aqueous dispersion
Water resistance class | D2 (EN 204)
Use | Interior only
Color after drying | Yellow
Open time | max 5 min
Assembly time | 10–15 min
Full cure time | 24 hours
Operating and storage temperature | 10°–24°C
Dilutable with water | Yes, up to 5%

Titebond II Premium – technical parameters (D3)

Type | PVA dispersion glue
Water resistance class | D3 (EN 204)
Use | Interior and exterior
Color after drying | Yellow/orange
Open time | max 5 min
Assembly time | 10–15 min
Full cure time | 24 hours
Operating and storage temperature | 13°–24°C
RF / hot press systems compatibility | Yes

Titebond III Ultimate – technical parameters (D4)

Type | Advanced proprietary polymer
Water resistance class | D4 (EN 204)
Use | Interior and exterior
Color after drying | Light brown
Open time | max 10 min
Assembly time | 20–25 min
Full cure time | 24 hours
Operating and storage temperature | 8°–24°C
Suitable for food contact | Yes (cutting boards and similar products)

Standard equipment

1 silicone roller Ø 20 mm, 47 mm width

1 silicone tray with front cut-outs

1 bottle of Titebond glue (variant of choice: Original D2, II Premium D3, III Ultimate D4)

Frequently asked questions

What is the difference between the IGM roller and the IGM brush kit for glue application?

The roller is designed for large, flat surfaces such as panels, sides, and tops; the brushes in the IGM kit are suitable for narrower surfaces, open mortises, and dovetail joints where the roller does not fit.

For veneering or panel gluing in a single pass, the 47 mm roller is faster and distributes a more uniform layer than a brush. For mixed applications, those working on both large surfaces and profiled joints benefit from having both tools available.

Do the angled grooves of the IGM roller help reduce