{"title":"Machining center lathes","description":"\u003cstrong\u003eMachining centers\u003c\/strong\u003e are the heart of many manufacturing operations. With their ability to precisely and efficiently machine a wide range of materials, these tools are essential to industry.","products":[{"product_id":"centri-lavorazione-bernardo-proficenter-550-wqv","title":"Metal Lathe Bernardo Proficenter 550 WQV","description":"\u003cp\u003eThe Bernardo Proficenter 550 WQV is a metal lathe for professional use, with a distance between centers of 550 mm, a 0.75 kW \/ 230 V motor, and a weight of 165 kg. Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 550 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 125 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 250 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 26 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore taper: MT 4\u003c\/li\u003e\n\u003cli\u003eSpeeds: 50 – 2000 \/ 100 – 2000 rpm\u003c\/li\u003e\n\u003cli\u003eLongitudinal feed: (6) 0.07 – 0.40 mm\/rev\u003c\/li\u003e\n\u003cli\u003eCross feed: (4) 0.03 – 0.075 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 550 WQV and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 550 WQV for cylindrical and conical turning and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 550 WQV is part of the Bernardo metal lathe range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Italian-speaking customer support available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 550 WQV for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshops and artisan turners\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eCylindrical and conical turning and threading on steels and alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial maintainers and repair centers\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eMachining of spare parts, shafts, bushings, and small production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyists and model making\u003c\/td\u003e\n\u003ctd\u003eTo be evaluated\u003c\/td\u003e\n\u003ctd\u003eProfessional machine: for occasional home use, consider smaller benchtop models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e applications outside the technical specifications declared by the manufacturer. For doubts about compatibility, contact Krollit customer support.\u003c\/p\u003e\n\u003ch3\u003eMachining Capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteel drilling capacity\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle and Speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e550 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore taper\u003c\/td\u003e\n\u003ctd\u003eMT 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeeds\u003c\/td\u003e\n\u003ctd\u003e50 – 2000 \/ 100 – 2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle speed\u003c\/td\u003e\n\u003ctd\u003e50 – 2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eMT 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable and Dimensions\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead inclination\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L x W x H)*\u003c\/td\u003e\n\u003ctd\u003e1210 x 610 x 860 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and Power Supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor power S1 100%\u003c\/td\u003e\n\u003ctd\u003e0.75 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor power S6 40%\u003c\/td\u003e\n\u003ctd\u003e1.0 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor power S1 100%\u003c\/td\u003e\n\u003ctd\u003e0.50 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor power S6 40%\u003c\/td\u003e\n\u003ctd\u003e0.75 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e(6) 0.07 – 0.40 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e(4) 0.03 – 0.075 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e18 (0.2 – 3.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e21 (8 – 56 TPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross slide T-slot\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e195 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e165 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 550 WQV work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the feed limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is recommended to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts provided, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models are 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the availability of adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, while benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fastening with anchors. Benchtop models up to 100 kg are installed on a sturdy bench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50714265616712,"sku":"03-1242","price":4123.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Proficenter_550_WQV_Tornio_combinato_con_DRO_digitale_2_assi_ES-12_V.png?v=1756820134"},{"product_id":"bernardo-tornio-metallo-proficenter-250-230v","title":"Bernardo Proficenter 250 Metal Lathe","description":"\u003cp\u003eThe Bernardo Proficenter 250 is a metal lathe for professional use, with a distance between centers of 250 mm, a center height of 75 mm, and a weight of approx. 39 kg. Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Proficenter 250 \/ 230 V\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 250 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 75 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 150 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 10 mm\u003c\/li\u003e\n\u003cli\u003eLathe speed: 100–2000 rpm\u003c\/li\u003e\n\u003cli\u003eMetric threads: (5) 0.5–1.25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 250 and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 250 for cylindrical turning, conical turning, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 250 is part of the Bernardo metal lathe range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 250 for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshops and artisan turners\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eCylindrical turning, conical turning, and threading on steels and alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial maintainers and repair centers\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eMachining of spare parts, shafts, bushings, and small-scale production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyists and model making\u003c\/td\u003e\n\u003ctd\u003eTo be evaluated\u003c\/td\u003e\n\u003ctd\u003eProfessional machine: for occasional home use, consider smaller benchtop models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e applications outside the technical specifications declared by the manufacturer. For doubts about compatibility, contact Krollit customer support.\u003c\/p\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine – drilling capacity in steel\u003c\/td\u003e\n\u003ctd\u003eØ 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e100–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle stroke\u003c\/td\u003e\n\u003ctd\u003e30 mm (MT2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling speed\u003c\/td\u003e\n\u003ctd\u003e100–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable and dimensions\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine – height adjustable head\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e650 × 350 × 520 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eProficenter 250 \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e(5) 0.5–1.25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImperial threads\u003c\/td\u003e\n\u003ctd\u003e(5) 16–24 TPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock travel\u003c\/td\u003e\n\u003ctd\u003e25 mm (MT1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 39 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 250 work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the pass limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened steels or high-strength alloys, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, verify the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts provided, consult the manufacturer's technical data sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, while benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo series models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eWeight varies significantly by model: see \"Weight\" in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fastening with anchor bolts. Benchtop models up to 100 kg are installed on a sturdy bench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50714759921992,"sku":"03-1005","price":1195.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Mini_tornio_Proficenter_250_230_V_con_fresatrice_integrata.png?v=1756481580"},{"product_id":"torni-fresatrici-bernardo-proficenter-550-wqv","title":"Bernardo metal lathe milling machine Proficenter 550 WQV 230 V","description":"\u003cp\u003eThe Bernardo Proficenter 550 WQV 230 V milling machine is a metal lathe for professional use, with a distance between centers of 550 mm, center height of 125 mm, and a weight of approx. 165 kg. Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Bernardo\u003c\/li\u003e\n\u003cli\u003eModel: Proficenter 550 WQV \/ 230 V\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 550 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 125 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 250 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 26 mm (MK4)\u003c\/li\u003e\n\u003cli\u003eLathe speed: 50–1000 \/ 100–2000 rpm\u003c\/li\u003e\n\u003cli\u003eLongitudinal feeds: (6) 0.07–0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 550 WQV 230 V milling machine and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 550 WQV 230 V milling machine for cylindrical turning, conical turning, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 550 WQV 230 V milling machine is part of the Bernardo range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping from Krollit warehouse in 3-5 working days. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 550 WQV 230 V milling machine for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshops and artisan turners\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eCylindrical turning, conical turning, and threading on steels and alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial maintenance technicians and repair centers\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eMachining of spare parts, shafts, bushings, and small-scale production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyists and model making\u003c\/td\u003e\n\u003ctd\u003eTo be evaluated\u003c\/td\u003e\n\u003ctd\u003eProfessional machine: for occasional home use, consider smaller benchtop models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e applications that exceed the technical specifications declared by the manufacturer. For doubts about compatibility, contact Krollit customer support.\u003c\/p\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine – steel drilling capacity\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e550 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e26 mm (MK4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e50–1000 \/ 100–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable and dimensions\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1210 × 610 × 860 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eProficenter 550 WQV \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e(6) 0.07–0.40 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feeds\u003c\/td\u003e\n\u003ctd\u003e(4) 0.03–0.075 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e(18) 0.2–3.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e(21) 8–56 TPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e70 mm (MT2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine – tilting head\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 165 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 550 WQV 230 V milling machine work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the pass limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts supplied, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eWeight varies significantly by model: see the \"Weight\" item in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fastening with anchors. Benchtop models up to 100 kg are installed on a sturdy bench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50714760708424,"sku":"03-1240","price":3599.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Tornio-fresatrice_Bernardo_Proficenter_550_WQV_compatto_e_preciso.png?v=1759138410"},{"product_id":"bernardo-tornio-per-metallo-hobby-500-230v-con-dro-2-assi-dt-40","title":"Metal Lathe Bernardo Hobby 500 \/ 230V with 2-axis DRO DT-40","description":"\u003cp\u003eThe Bernardo Hobby 500 \/ 230V with 2-axis DRO DT-40 is a metal lathe for professional use, with a distance between centers of 500 mm, center height of 110 mm, 0.55 kW \/ 230 V motor, and a weight of approx. 130 kg. Krollit has been an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 500 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 110 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 220 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 20 mm\u003c\/li\u003e\n\u003cli\u003eSpindle taper: CM 3\u003c\/li\u003e\n\u003cli\u003eSpindle speed range: 140 – 1710 rpm (6 positions)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Hobby 500 \/ 230V with 2-axis DRO DT-40 and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Hobby 500 \/ 230V with 2-axis DRO DT-40 for cylindrical, tapered, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Hobby 500 \/ 230V with 2-axis DRO DT-40 is part of the Bernardo metal lathe range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 business days (7 days to the South). For spare parts and accessories, shipping in 3-5 business days from the Krollit warehouse. Italian-speaking customer support available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Hobby 500 \/ 230V with 2-axis DRO DT-40 for\u003c\/h3\u003e\n\u003cp\u003eThe Hobby 500 \/ 230V with 2-axis DRO DT-40 is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical, tapered, and threading operations on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: machining of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller bench models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpindle, tools, and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eCM 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle speed range\u003c\/td\u003e\n\u003ctd\u003e140 – 1710 rpm (6 positions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e(4) 0.05 – 0.2 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e(11) 0.4 – 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e(11) 8 – 28 threads\/inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eCM 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L x W x H)*\u003c\/td\u003e\n\u003ctd\u003e1150 x 480 x 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 130 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power in S1 (100%) operation\u003c\/td\u003e\n\u003ctd\u003e0.55 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power in S6 (40%) operation\u003c\/td\u003e\n\u003ctd\u003e0.80 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Hobby 500 \/ 230V with 2-axis DRO DT-40 work with?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the pass limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is dimensioned for general mechanical production; for special alloys, verify the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts supplied, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 business days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact bench machines are often 230 V single-phase, professional models are 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial electrical line is required. Verify the presence of adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, while bench models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eThe Profi and Apollo models are designed for intensive multi-shift use; the Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eWeight varies significantly by model: see \"Weight\" in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fixing with anchors. Bench models up to 100 kg are installed on a sturdy bench with an appropriately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50714907541832,"sku":"03-1071","price":2318.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/ornio_da_banco_Hobby_500_230_V_con_visualizzatore_digitale_DT_40.png?v=1756477095"},{"product_id":"proficenter-700-bqv","title":"Metal Lathe Bernardo Proficenter 700 BQV \/ 230 V","description":"\u003cp\u003eThe Bernardo Proficenter 700 BQV \/ 230 V is a metal lathe for professional use, with a distance between centers of 700 mm, a center height of 150 mm, and a weight of 298 kg (without base). Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 700 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 150 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 280 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle taper: MT5\u003c\/li\u003e\n\u003cli\u003eLathe speed: 50–1000 \/ 100–1800 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 700 BQV \/ 230 V and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 700 BQV \/ 230 V for cylindrical, conical, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small batches.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 700 BQV \/ 230 V is part of the Bernardo metal lathe range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance in selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 700 BQV \/ 230 V for?\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 700 BQV \/ 230 V is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical, conical, and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller benchtop models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity milling machine\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eMT5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e50–1000 \/ 100–1800 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head inclination\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1380 x 640 x 1020 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e298 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.1 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 0.65 mm\/rev (14 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.03 – 0.12 mm\/rev (11 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 700 BQV \/ 230 V work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass and aluminum within the pass limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts supplied, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact bench machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small laboratories.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see \"Weight\" in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fixing with anchor bolts. Benchtop models up to 100 kg are installed on a robust workbench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715440480584,"sku":"03-1249","price":4867.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Tornio_Proficenter_700_BQV_combinato_tornio-fresa.jpg?v=1757319084"},{"product_id":"torni-bernardo-proficenter-700bqv-230v-dro","title":"Bernardo Proficenter 700 BQV Metal Lathe \/ 230 V with DRO","description":"\u003cp\u003eThe Bernardo Proficenter 700 BQV \/ 230 V with DRO is a metal lathe for professional use, with a distance between centers of 700 mm, center height of 150 mm, and a weight of 298 kg (without base). Krollit, an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 700 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 150 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 280 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle taper: MT5\u003c\/li\u003e\n\u003cli\u003eLathe speed: 50–1000 \/ 100–1800 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 700 BQV \/ 230 V with DRO and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 700 BQV \/ 230 V with DRO for cylindrical turning, conical turning, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 700 BQV \/ 230 V with DRO is part of the Bernardo range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Italian-speaking customer support available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 700 BQV \/ 230 V with DRO for?\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 700 BQV \/ 230 V with DRO is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical turning, conical turning, and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing spare parts, shafts, bushings, and small production runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller benchtop models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity milling machine\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools, and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eMT5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e50–1000 \/ 100–1800 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions, and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1380 x 640 x 1020 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e298 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.1 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 0.65 mm\/rev (14 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.03 – 0.12 mm\/rev (11 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 pitches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 pitches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 700 BQV \/ 230 V with DRO work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of supplied accessories and spare parts, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models are 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, while benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eThe Profi and Apollo series are designed for intensive multi-shift use; the Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fixing with anchor bolts. Benchtop models up to 100 kg can be installed on a sturdy workbench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715441234248,"sku":"03-1250B","price":5380.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Centro_di_lavoro_Bernardo_Proficenter_700_BQV_con_tornio_e_fresatrice.jpg?v=1758817014"},{"product_id":"torni-bernardo-proficenter-700top-230v-dro","title":"Bernardo Proficenter 700 Top \/ 230 V Metal Lathe with DRO","description":"\u003cp\u003eThe Bernardo Proficenter 700 Top \/ 230 V with DRO is a metal lathe for professional use, with a distance between centers of 700 mm, a center height of 150 mm, and a weight of 298 kg (without base). Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 700 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 150 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 300 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle taper: MT5\u003c\/li\u003e\n\u003cli\u003eLathe speed: 70–380 \/ 380–2000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 700 Top \/ 230 V with DRO and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 700 Top \/ 230 V with DRO for cylindrical and conical turning operations and threading on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 700 Top \/ 230 V with DRO is part of Bernardo's range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Italian-speaking customer support available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 700 Top \/ 230 V with DRO for\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 700 Top \/ 230 V with DRO is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical and conical turning and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing of spare parts, shafts, bushings, and small production runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller benchtop models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity milling machine\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eMT5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e70–380 \/ 380–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1380 x 640 x 1020 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e298 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e0.85 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e1.1 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 0.65 mm\/rev (14 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.03 – 0.12 mm\/rev (11 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead vertical adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 700 Top \/ 230 V with DRO work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the cutting limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts supplied, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model's class: professional Bernardo lathes handle continuous cycles, while benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eThe Profi and Apollo models are designed for intensive multi-shift use; the Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fastening with anchors. Benchtop models up to 100 kg can be installed on a sturdy workbench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715442577736,"sku":"03-1252B","price":5880.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Centro_di_lavoro_Bernardo_Proficenter_700_Top_con_tornio_e_fresatrice.jpg?v=1758816748"},{"product_id":"torni-bernardo-proficenter-880g-vario-230v-dro","title":"Bernardo Proficenter 880 G Vario \/ 230 V metal lathe with DRO","description":"\u003cp\u003eThe Bernardo Proficenter 880 G Vario \/ 230 V with DRO is a metal lathe for professional use, with a distance between centers of 880 mm, center height of 160 mm, and weighing 318 kg (without base). Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 880 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 160 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 320 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle mount: DIN 55029 D1-4\u003c\/li\u003e\n\u003cli\u003eLathe speed: 75–435 \/ 400–2250 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 880 G Vario \/ 230 V with DRO and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 880 G Vario \/ 230 V with DRO for cylindrical and conical turning and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 880 G Vario \/ 230 V with DRO is part of the Bernardo metal lathe range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer assistance in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 880 G Vario \/ 230 V with DRO for?\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 880 G Vario \/ 230 V with DRO is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical and conical turning and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model makers\u003c\/strong\u003e: professional machine; for occasional home use, consider smaller bench models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining Capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity milling machine\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e880 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle mount\u003c\/td\u003e\n\u003ctd\u003eDIN 55029 D1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e75–435 \/ 400–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head swivel\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1660 x 650 x 1090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e318 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e2.2 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 1.0 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.017 – 0.25 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 880 G Vario \/ 230 V with DRO work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the pass limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is recommended to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check spindle and tailstock Morse taper compatibility.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts provided, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat kind of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, while benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eThe Profi and Apollo models are designed for intensive multi-shift use; the Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fastening with anchors. Benchtop models up to 100 kg are installed on a sturdy workbench with an adequately sized surface.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715443593544,"sku":"03-1233","price":6490.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Proficenter_880_G_Vario_230V_con_DRO_2_assi.jpg?v=1757279841"},{"product_id":"proficenter-880-g-vario-400-v","title":"Bernardo Proficenter 880 G Vario Metal Lathe \/ 400 V","description":"\u003cp\u003eThe Bernardo Proficenter 880 G Vario \/ 400 V is a metal lathe for professional use, with a distance between centers of 880 mm, a center height of 160 mm, and a weight of 318 kg (without base). Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 880 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 160 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 320 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle nose: DIN 55029 D1-4\u003c\/li\u003e\n\u003cli\u003eLathe speed: 75–435 \/ 400–2250 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 880 G Vario \/ 400 V and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 880 G Vario \/ 400 V for cylindrical turning, conical turning, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 880 G Vario \/ 400 V is part of Bernardo's range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 880 G Vario \/ 400 V for\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 880 G Vario \/ 400 V is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical turning, conical turning, and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintainers and repair centers\u003c\/strong\u003e: machining of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller benchtop models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity milling machine\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e880 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle nose\u003c\/td\u003e\n\u003ctd\u003eDIN 55029 D1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e75–435 \/ 400–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1660 x 650 x 1090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e318 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e2.2 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 1.0 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.017 – 0.25 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImperial threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 880 G Vario \/ 400 V work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the pass limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts supplied, consult the manufacturer's technical data sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Check for adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see \"Weight\" in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and anchoring with bolts. Benchtop models up to 100 kg are installed on a sturdy workbench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715443953992,"sku":"03-1231","price":5073.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Centro_di_lavoro_Bernardo_Proficenter_880_G_Vario_tornio-fresatrice.jpg?v=1758816467"},{"product_id":"torni-bernardo-proficenter-880g-vario-400v-dro","title":"Bernardo Proficenter 880 G Vario Metal Lathe \/ 400 V with DRO","description":"\u003cp\u003eThe Bernardo Proficenter 880 G Vario \/ 400 V with DRO is a metal lathe for professional use, with a distance between centers of 880 mm, center height of 160 mm, and a weight of 318 kg (without base). Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 880 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 160 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 320 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle mount: DIN 55029 D1-4\u003c\/li\u003e\n\u003cli\u003eLathe speed: 75–435 \/ 400–2250 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 880 G Vario \/ 400 V with DRO and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 880 G Vario \/ 400 V with DRO for cylindrical, conical turning and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 880 G Vario \/ 400 V with DRO is part of the Bernardo range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the machine suitable for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 880 G Vario \/ 400 V with DRO for?\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 880 G Vario \/ 400 V with DRO is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical, conical turning and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing of spare parts, shafts, bushings, and small production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller bench models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity (milling machine)\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e880 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle mount\u003c\/td\u003e\n\u003ctd\u003eDIN 55029 D1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e75–435 \/ 400–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1660 x 650 x 1090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e318 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e2.2 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 1.0 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.017 – 0.25 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 880 G Vario \/ 400 V with DRO work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass and aluminum within the pass limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories and wrench set.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts supplied, consult the manufacturer's technical data sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact bench machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: Bernardo professional lathes handle continuous cycles, while bench models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eWeight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fixing with anchors. Bench models up to 100 kg are installed on a sturdy workbench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715444150600,"sku":"03-1232","price":5711.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Proficenter_880_G_Vario_con_DRO_a_2_assi_e_mandrino_160_mm.jpg?v=1757279565"},{"product_id":"torni-bernardo-proficenter-900-vario-230v-dro","title":"Bernardo Proficenter 900 Vario Metal Lathe \/ 230 V with DRO","description":"\u003cp\u003eThe Bernardo Proficenter 900 Vario \/ 230 V with DRO is a metal lathe for professional use, with a distance between centers of 900 mm, center height of 160 mm, and a weight of 303 kg (without base). Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 900 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 160 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 320 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle nose: DIN 55029 D1-4\u003c\/li\u003e\n\u003cli\u003eLathe speed: 75–500 \/ 300–2000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 900 Vario \/ 230 V with DRO and for what\u003c\/h3\u003e\n\u003cp\u003eMachine shops and artisan turners use the Proficenter 900 Vario \/ 230 V with DRO for cylindrical, conical, and thread turning operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 900 Vario \/ 230 V with DRO is part of the Bernardo metal lathe range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 business days (7 days to the South). For spare parts and accessories, shipping in 3-5 business days from the Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 900 Vario \/ 230 V with DRO for?\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 900 Vario \/ 230 V with DRO is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine shops and artisan turners\u003c\/strong\u003e: cylindrical, conical, and thread turning on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller bench models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling drilling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e900 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle nose\u003c\/td\u003e\n\u003ctd\u003eDIN 55029 D1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e75–500 \/ 300–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1650 x 650 x 1120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e303 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e2.2 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 1.0 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.017 – 0.25 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 900 Vario \/ 230 V with DRO process?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the cutting limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, check spindle and tailstock Morse taper compatibility.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts provided, consult the manufacturer's technical data sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 business days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact bench machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial electrical line is required. Verify the presence of adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, bench lathes are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eWeight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines above 500 kg require industrial flooring and fixing with anchor bolts. Bench models up to 100 kg are installed on a sturdy workbench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715444511048,"sku":"03-1237","price":5102.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Centro_di_lavoro_Bernardo_Proficenter_900_Vario_230_V_con_DRO.png?v=1758815996"},{"product_id":"torni-bernardo-proficenter-900-vario-400v","title":"Metal Lathe Bernardo Proficenter 900 Vario \/ 400 V","description":"\u003cp\u003eThe Bernardo Proficenter 900 Vario \/ 400 V is a metal lathe for professional use, with a distance between centers of 900 mm, center height of 160 mm, and a weight of 303 kg (without stand). Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 900 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 160 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 320 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle nose: DIN 55029 D1-4\u003c\/li\u003e\n\u003cli\u003eLathe speed: 75–500 \/ 300–2000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 900 Vario \/ 400 V and for what purpose\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 900 Vario \/ 400 V for cylindrical turning, taper turning, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 900 Vario \/ 400 V is part of Bernardo's range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 900 Vario \/ 400 V for\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 900 Vario \/ 400 V is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical turning, taper turning, and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine; for occasional home use, consider smaller benchtop models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity (milling attachment)\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools, and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e900 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle nose\u003c\/td\u003e\n\u003ctd\u003eDIN 55029 D1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e75–500 \/ 300–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions, and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1650 x 650 x 1120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e303 kg (without stand)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e2.2 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 1.0 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.017 – 0.25 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 900 Vario \/ 400 V work with?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the feed limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is recommended to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, verify spindle and tailstock Morse taper compatibility.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts provided, consult the manufacturer's technical data sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, while benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see \"Weight\" in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and anchoring with dowels. Benchtop models up to 100 kg can be installed on a sturdy workbench with an adequately sized surface.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715444609352,"sku":"03-1235","price":5343.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Centro_di_lavoro_Bernardo_900_Vario_con_tornio_e_fresatrice.jpg?v=1758815042"},{"product_id":"torni-bernardo-proficenter-900-vario-400v-dro","title":"Bernardo Proficenter 900 Vario Metal Lathe \/ 400 V with DRO","description":"\u003cp\u003eThe Bernardo Proficenter 900 Vario \/ 400 V with DRO is a metal lathe for professional use, with a distance between centers of 900 mm, a center height of 160 mm, and a weight of 303 kg (without base). Krollit has been an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 900 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 160 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 320 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 38 mm\u003c\/li\u003e\n\u003cli\u003eSpindle nose: DIN 55029 D1-4\u003c\/li\u003e\n\u003cli\u003eLathe speed: 75–500 \/ 300–2000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 900 Vario \/ 400 V with DRO and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 900 Vario \/ 400 V with DRO for cylindrical and conical turning, and threading operations on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 900 Vario \/ 400 V with DRO is part of Bernardo's range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 900 Vario \/ 400 V with DRO for?\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 900 Vario \/ 400 V with DRO is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical and conical turning, and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: machining of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine: for occasional home use, consider smaller benchtop models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity (milling)\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003eØ 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools, and speeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e900 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle nose\u003c\/td\u003e\n\u003ctd\u003eDIN 55029 D1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed\u003c\/td\u003e\n\u003ctd\u003e75–500 \/ 300–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling speed\u003c\/td\u003e\n\u003ctd\u003e50–2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions, and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot width\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1650 x 650 x 1120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e303 kg (without base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1\u003c\/td\u003e\n\u003ctd\u003e1.5 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6\u003c\/td\u003e\n\u003ctd\u003e2.2 kW \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feed\u003c\/td\u003e\n\u003ctd\u003e0.07 – 1.0 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feed\u003c\/td\u003e\n\u003ctd\u003e0.017 – 0.25 mm\/rev (15 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.2 – 3.5 mm (18 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e8 – 56 TPI (21 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 900 Vario \/ 400 V with DRO work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the cutting limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is sized for general mechanical production; for special alloys, verify the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts provided, consult the manufacturer's technical data sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, while benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fixing with anchor bolts. Benchtop models up to 100 kg can be installed on a sturdy workbench with an adequately sized surface.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715444805960,"sku":"03-1236","price":6002.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Centro_di_lavoro_Bernardo_Proficenter_900_Vario_con_tornio_e_fresatrice.jpg?v=1758813450"},{"product_id":"tornio-proficenter-700-top","title":"Bernardo Proficenter 700 Top – Combined Lathe and Milling Machine","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eBernardo Tornio Proficenter 700 Top with integrated milling machine\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBernardo Proficenter 700 Top\u003c\/strong\u003e is a compact and versatile lathe\/milling combination machine, suitable for demanding hobbyists, light workshops, and educational laboratories. With a \u003cstrong\u003edistance between centers of 700 mm\u003c\/strong\u003e and a center height of 150 mm, it allows for precise turning operations up to Ø 300 mm swing over bed. The 38 mm spindle, with an MK5 taper, offers wide versatility and continuous speed adjustment (70–2000 rpm). The integrated milling section, with a ±90° tilting head, MK2 taper, and speeds from 50 to 2250 rpm, allows for drilling and milling operations up to 20 mm. Equipped with a frequency converter, digital display, 160 mm 3-jaw chuck, and numerous included accessories, the Proficenter 700 Top ensures reliability, precision, and practicality in a single space-saving solution.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMain Specifications\u003c\/h3\u003e\n\u003cp\u003e ⚙️ Lathe and milling machine combined in one unit\u003cbr\u003e 📏 Distance between centers: 700 mm – Swing over bed: 300 mm\u003cbr\u003e 🔩 Spindle bore Ø 38 mm with MK5 taper\u003cbr\u003e Adjustable speeds: lathe 70–2000 rpm, milling machine 50–2250 rpm\u003cbr\u003e 🧰 Metric threads (0.2–3.5 mm) and imperial threads (8–56 TPI)\u003cbr\u003e 🔄 Multiple feeds: adjustable longitudinal and cross feeds\u003cbr\u003e 🛠️ Milling head tiltable ±90° and height adjustable 260 mm\u003cbr\u003e Digital display for speed and spindle\u003cbr\u003e 🏋️ Solid construction, weight approx. 298 kg, compact and stable\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e🔹 LATHE\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore taper\u003c\/td\u003e\n\u003ctd\u003eMK 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed (continuous adjustment)\u003c\/td\u003e\n\u003ctd\u003e70–380 \/ 380–2000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e(14) 0.07 – 0.65 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feeds\u003c\/td\u003e\n\u003ctd\u003e(11) 0.03 – 0.12 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e(18) 0.2 – 3.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImperial threads\u003c\/td\u003e\n\u003ctd\u003e(21) 8 – 56 TPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill travel\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMK 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slots on cross slide\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S1 100%\u003c\/td\u003e\n\u003ctd\u003e0.85 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor S6 40%\u003c\/td\u003e\n\u003ctd\u003e1.1 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e🔹 MILLING MACHINE\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. face mill\u003c\/td\u003e\n\u003ctd\u003e63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. end mill\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm length\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle speed\u003c\/td\u003e\n\u003ctd\u003e50 – 2250 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eMK 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilting milling head\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead height adjustment\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S1 100%\u003c\/td\u003e\n\u003ctd\u003e0.60 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor S6 40%\u003c\/td\u003e\n\u003ctd\u003e0.90 kW \/ 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e🔹 OTHER\u003c\/h3\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L×W×H)*\u003c\/td\u003e\n\u003ctd\u003e1380 × 640 × 1020 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 298 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e*without stand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003ch3\u003e\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003c\/h3\u003e\n\u003cp\u003e 3-jaw chuck DK11-160 mm\u003cbr\u003e Spindle flange 160 mm\u003cbr\u003e Drill chuck with key 1–13 mm \/ B16\u003cbr\u003e Taper arbor MK2\/B16\u003cbr\u003e Four-way tool post\u003cbr\u003e Slipping clutch\u003cbr\u003e Micrometric longitudinal stop\u003cbr\u003e Cross slide with top support\u003cbr\u003e Integrated frequency converter\u003cbr\u003e Digital display for spindle\/speed\u003cbr\u003e Clamping spindle M10\u003cbr\u003e Thread gauge\u003cbr\u003e Fixed center points\u003cbr\u003e Spare gears\u003cbr\u003e Spindle guard\u003cbr\u003e Lead screw cover\u003cbr\u003e Chip tray back wall\u003cbr\u003e Control device\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 business days (7 days in the South). Original spare parts available with 3–5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the Proficenter 700 a lathe, a milling machine, or both?\u003c\/summary\u003e\n\u003cp\u003eBoth in the same machine. The Proficenter 700 Top integrates: a lathe with a gap bed (distance between centers 700 mm, Ø bed 280 mm) and a vertical milling head mounted on the column. Switching between the two modes is done by moving the head — no need to disassemble and reassemble anything. Suitable for advanced hobbyists, educational workshops, and maintenance departments where space limits the purchase of two separate machines.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the integrated milling machine have the same performance as a dedicated milling machine?\u003c\/summary\u003e\n\u003cp\u003eNo — combination lathe\/milling machines inherently have limitations compared to dedicated machines: shorter axis travel, lower rigidity under high lateral loads, and time-consuming mode changes. The Proficenter is the correct choice for occasional milling operations on small workpieces, not for series production with heavy milling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and accessories available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much power does the Proficenter 700 Top require?\u003c\/summary\u003e\n\u003cp\u003eSingle-phase 230 V power supply — direct connection to a 16A Schuko socket. No three-phase system needed. Suitable for private workshops, garages, and laboratories without industrial power. \u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50715965129032,"sku":"03-1251","price":5331.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Proficenter_700_Top_Tornio_e_fresatrice_combinata_compatta.png?v=1757277345"},{"product_id":"torni-bernardo-proficenter-650-g-400v","title":"Lathe Milling Machine Bernardo Proficenter 650 G \/ 400 V with 2-axis DRO","description":"\u003cp\u003e\u003cstrong\u003eBernardo Proficenter 650 G \/ 400 V Combined Lathe with Milling Machine and DRO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bernardo Proficenter 650 G \/ 400 V is a combined lathe-milling machine, suitable for workshops, schools, and businesses that need a versatile and precise machine. The lathe offers a distance between centers of 650 mm and a swing over bed of 280 mm, with speeds adjustable in 12 steps from 70 to 2000 rpm. The integrated milling machine, with a tiltable head of -90°\/+90° and continuous speed up to 2250 rpm, allows drilling up to Ø 16 mm and milling up to Ø 50 mm. Equipped with two separate motors (0.75 kW three-phase for the lathe, 0.50 kW single-phase for the milling machine), it guarantees constant performance. The ES-12 V 2-axis digital readout facilitates precision machining. The extensive equipment includes a Ø 125 mm self-centering chuck, drill chuck, 4-way tool post, change gears, LED light, and CE guards.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eMain Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLathe:\u003c\/strong\u003e\u003cbr\u003e Distance between centers: 650 mm\u003cbr\u003e Center height: 140 mm\u003cbr\u003e Swing over bed: 280 mm\u003cbr\u003e Bed width: 160 mm\u003cbr\u003e Spindle bore: Ø 26 mm, MT4 taper\u003cbr\u003e Speed range: 70 – 2000 rpm (12 steps)\u003cbr\u003e Longitudinal feeds: 0.036 – 0.364 mm\/rev (15)\u003cbr\u003e Cross feeds: 0.019 – 0.188 mm\/rev (15)\u003cbr\u003e Metric threads: 0.25 – 5 mm (27 pitches)\u003cbr\u003e Imperial threads: 6 – 96 TPI (20 pitches)\u003cbr\u003e Tailstock quill: travel 105 mm, MT3 taper\u003cbr\u003e Lathe motor: 0.75 kW (S1) \/ 1.0 kW (S6) – 400 V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Machine:\u003c\/strong\u003e\u003cbr\u003e Drilling capacity in steel: 16 mm\u003cbr\u003e End milling capacity: max. 16 mm\u003cbr\u003e Face milling capacity: max. 50 mm\u003cbr\u003e Spindle to column distance: 150 mm\u003cbr\u003e Speed: 50 – 2250 rpm, continuous\u003cbr\u003e Spindle taper: MT2\u003cbr\u003e Tilting head: -90° \/ +90°\u003cbr\u003e Vertical head travel: 195 mm\u003cbr\u003e Milling motor: 0.50 kW (S1) \/ 0.75 kW (S6) – 230 V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral:\u003c\/strong\u003e\u003cbr\u003e Dimensions: 1400 x 720 x 970 mm (without stand)\u003cbr\u003e Weight: 256 kg\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Table:\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBernardo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eProficenter 650 G \/ 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e650 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed width\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003eØ 26 mm, MT4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed range\u003c\/td\u003e\n\u003ctd\u003e70 – 2000 rpm (12 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e0.036 – 0.364 mm\/rev (15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feeds\u003c\/td\u003e\n\u003ctd\u003e0.019 – 0.188 mm\/rev (15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.25 – 5 mm (27)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImperial threads\u003c\/td\u003e\n\u003ctd\u003e6 – 96 TPI (20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill diameter\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor\u003c\/td\u003e\n\u003ctd\u003e0.75 kW (S1) \/ 1.0 kW (S6) – 400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity in steel\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003emax. 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003emax. 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine speed\u003c\/td\u003e\n\u003ctd\u003e50 – 2250 rpm, continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head travel\u003c\/td\u003e\n\u003ctd\u003e195 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor\u003c\/td\u003e\n\u003ctd\u003e0.50 kW (S1) \/ 0.75 kW (S6) – 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1400 x 720 x 970 mm*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e256 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eEurope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e*\u003c\/td\u003e\n\u003ctd\u003ewithout stand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003cbr\u003e ES-12 V 2-axis digital readout with LCD\u003cbr\u003e 3-jaw self-centering chuck Ø 125 mm\u003cbr\u003e Flange Ø 125 mm\u003cbr\u003e Drill chuck 1–13 mm (B16) + MT2\/B16 arbor\u003cbr\u003e 4-way tool post\u003cbr\u003e Cross slide with top slide\u003cbr\u003e Thread dial\u003cbr\u003e Dead centers\u003cbr\u003e Change gears\u003cbr\u003e Drawbar M10\u003cbr\u003e Digital display for speed and spindle travel\u003cbr\u003e LED machine light\u003cbr\u003e CE guards: chuck guard, leadscrew cover, splash guard\u003cbr\u003e Set of tools and accessories\u003c\/p\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping: 5–9 working days (7 days to Southern Italy). Original spare parts available with 3–5 working day shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the Proficenter 650 G have a geared headstock (G) – how does it differ from Vario versions?\u003c\/summary\u003e\n\u003cp\u003eThe geared headstock (Getriebe) delivers higher torque at low speeds compared to belt or electronic variable speed drives – essential for turning high-strength steels, large sections, and heavy roughing cuts. Speed changes are made from a standstill by turning an external lever without disassembling belts. Compared to the Vario, it is less convenient for frequent speed changes but more robust for continuous heavy use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the integrated milling machine have the same travel as a dedicated milling machine?\u003c\/summary\u003e\n\u003cp\u003eNo – the axis travel of the integrated milling machine in the Proficenter 650 G is more limited compared to a dedicated BF or FM milling machine. The advantage is versatility in a small space; the limitation is maximum travel and rigidity under high loads. For occasional milling operations on small-to-medium parts, it is adequate; for intensive milling on large parts, a dedicated milling machine is needed.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the ES-12 V 3-axis DRO included as standard?\u003c\/summary\u003e\n\u003cp\u003eYes – in Proficenter 650 G models with DRO specification, the 3-axis digital readout is included as standard. It simultaneously reads X, Z, and W axes with 0.001 mm resolution – eliminating vernier readings and reducing measurement errors in complex lathe + milling setups.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and support available?\u003c\/summary\u003e\n\u003cp\u003eOriginal spare parts available with 3–5 working day shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50716126609736,"sku":"03-1228","price":4867.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Tornio-fresatrice_Bernardo_Proficenter_650_G_400_V_con_DRO_2_assi.png?v=1757606238"},{"product_id":"torni-bernardo-proficenter-650-g","title":"Bernardo Proficenter 650 G Metal Lathe Milling Machine with 2-Axis DRO","description":"\u003cp\u003eBernardo Proficenter 650 G milling machine with 2-axis DRO is a metal lathe for professional use, with a distance between centers of 650 mm, center height of 140 mm, and weight of 256 kg. Krollit, official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistance between centers: 650 mm\u003c\/li\u003e\n\u003cli\u003eCenter height: 140 mm\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 280 mm\u003c\/li\u003e\n\u003cli\u003eBed width: 160 mm\u003c\/li\u003e\n\u003cli\u003eSpindle bore: Ø 26 mm, MT4\u003c\/li\u003e\n\u003cli\u003eLathe speed range: 70 – 2000 rpm (12 steps)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Proficenter 650 G milling machine with 2-axis DRO and for what\u003c\/h3\u003e\n\u003cp\u003eMechanical workshops and artisan turners use the Proficenter 650 G milling machine with 2-axis DRO for cylindrical, conical turning and threading on steels and alloys. The machine supports the production of spare parts, shafts, bushings, and small series.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo Proficenter 650 G milling machine with 2-axis DRO is part of Bernardo's range of metal lathes, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days to Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the Proficenter 650 G milling machine with 2-axis DRO for\u003c\/h3\u003e\n\u003cp\u003eThe Proficenter 650 G milling machine with 2-axis DRO is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical workshops and artisan turners\u003c\/strong\u003e: cylindrical, conical turning, and threading on steels and alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance technicians and repair centers\u003c\/strong\u003e: processing of spare parts, shafts, bushings, and small-scale production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyists and model making\u003c\/strong\u003e: professional machine; for occasional home use, consider smaller benchtop models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProcessing capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling capacity in steel\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace milling capacity\u003c\/td\u003e\n\u003ctd\u003emax. 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd milling capacity\u003c\/td\u003e\n\u003ctd\u003emax. 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical head travel\u003c\/td\u003e\n\u003ctd\u003e195 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpindle, tools, and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between centers\u003c\/td\u003e\n\u003ctd\u003e650 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter height\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle bore\u003c\/td\u003e\n\u003ctd\u003eØ 26 mm, MT4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe speed range\u003c\/td\u003e\n\u003ctd\u003e70 – 2000 rpm (12 steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling machine speed\u003c\/td\u003e\n\u003ctd\u003e50 – 2250 rpm, continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling spindle taper\u003c\/td\u003e\n\u003ctd\u003eMT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions, and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed width\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e1400 x 720 x 970 mm*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e256 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwing over bed\u003c\/td\u003e\n\u003ctd\u003e280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e0.036 – 0.364 mm\/revolution (15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feeds\u003c\/td\u003e\n\u003ctd\u003e0.019 – 0.188 mm\/revolution (15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetric threads\u003c\/td\u003e\n\u003ctd\u003e0.25 – 5 mm (27)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInch threads\u003c\/td\u003e\n\u003ctd\u003e6 – 96 TPI (20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock quill diameter\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTailstock taper\u003c\/td\u003e\n\u003ctd\u003eMT3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eEurope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e*\u003c\/td\u003e\n\u003ctd\u003ewithout stand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLathe motor\u003c\/td\u003e\n\u003ctd\u003e0.75 kW (S1) \/ 1.0 kW (S6) – 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling motor\u003c\/td\u003e\n\u003ctd\u003e0.50 kW (S1) \/ 0.75 kW (S6) – 230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials can the Proficenter 650 G milling machine with 2-axis DRO work on?\u003c\/summary\u003e\n\u003cp\u003eMild steels, alloy steels, cast iron, brass, and aluminum within the cutting limits indicated in the technical specifications.\u003c\/p\u003e\n\u003cp\u003eFor hardened or high-strength alloy steels, it is advisable to reduce cutting speed and depth of cut. The machine is dimensioned for general mechanical production; for special alloys, check the compatibility of the spindle and tailstock Morse taper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is included in the standard equipment?\u003c\/summary\u003e\n\u003cp\u003eThe equipment includes a self-centering chuck, tailstock, steady rest, threading accessories, and a set of wrenches.\u003c\/p\u003e\n\u003cp\u003eFor the exact list of accessories and spare parts provided, consult the manufacturer's technical sheet. Krollit provides support for original Bernardo spare parts with delivery times of 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee the voltage data in the technical table. Compact benchtop machines are often 230 V single-phase, professional models 400 V three-phase.\u003c\/p\u003e\n\u003cp\u003eFor 400 V three-phase models, an industrial power line is required. Verify the presence of adequate power supply in the workshop before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the machine suitable for series production?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model class: professional Bernardo lathes handle continuous cycles, benchtop models are suitable for medium use.\u003c\/p\u003e\n\u003cp\u003eProfi and Apollo models are designed for intensive multi-shift use; Hobby and Goliath series for occasional use or small workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does it weigh and what installation does it require?\u003c\/summary\u003e\n\u003cp\u003eThe weight varies significantly by model: see the \"Weight\" entry in the technical table.\u003c\/p\u003e\n\u003cp\u003eMachines over 500 kg require industrial flooring and fixing with anchor bolts. Benchtop models up to 100 kg are installed on a sturdy workbench with an adequately sized top.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50719362810184,"sku":"03-1227","price":4867.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Tornio-fresatrice_Bernardo_Proficenter_650_G_con_DRO_2_assi.png?v=1757605631"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/collections\/torni-centro-di-lavoro.png?v=1753694361","url":"https:\/\/www.krollit.com\/collections\/lathes-centro-lavoro.oembed","provider":"Krollit","version":"1.0","type":"link"}