{"title":"Universal milling machines","description":"\u003cp\u003eThe \u003cstrong\u003euniversal milling machine\u003c\/strong\u003e is a precision mechanical processing machine with a double spindle: one vertical for face milling and drilling, and one horizontal for side milling and slotting. This configuration, also called a universal mill, allows for complete machining without moving the workpiece between different machines. In our catalog, you will find 9 \u003ca href=\"\/collections\/bernardo\"\u003eBernardo\u003c\/a\u003e UWF series models with ISO 40 and ISO 50 taper, tilting head, and 3-axis DRO as standard. Prices range from €11,474 to €27,835 including VAT.\u003c\/p\u003e","products":[{"product_id":"bernardo-fresatrice-universale-uwf-90-v","title":"Bernardo UWF 90 V Universal Milling Machine – ISO 40, double spindle, 1,270×280 mm table, 2.2+2.2 kW motors, ES-12 H 3-axis DRO","description":"\u003cp\u003eThe Bernardo UWF 90 V universal milling machine offers an ISO 40 vertical and horizontal spindle, 8 vertical speed stages (90-2,000 rpm) and 12 horizontal speed stages (40-1,300 rpm), a 1,270×280 mm table inclinable by ±45° with 14 mm T-slots, a -90°\/+90° swiveling head, longitudinal travel of 750 mm (manual) \/ cross travel of 230 mm \/ vertical travel of 300 mm, automatic X and Y feeds with rapid traverse, a Z-axis positioning motor (660 mm\/min rapid feed), automatic spindle feed (0.08\/0.15\/0.25 mm\/rev), 2.2 kW vertical + 2.2 kW horizontal motors, and a heavy cast iron structure with dovetail guides. A 3-axis DRO ES-12 H is included. Weight: 1,310 kg. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindles:\u003c\/strong\u003e Vertical and horizontal ISO 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical speed:\u003c\/strong\u003e 8 stages: 90 – 2,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal speed:\u003c\/strong\u003e 12 stages: 40 – 1,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,270 × 280 mm inclinable ±45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel (X \/ Y \/ Z):\u003c\/strong\u003e 750 \/ 230 \/ 300 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 2.2 kW vertical + 2.2 kW horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-axis DRO:\u003c\/strong\u003e ES-12 H included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 90 V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 90 V is the mid-range universal milling machine in the UWF family, sized for mechanical workshops with medium to large part production. It represents a dimensional leap compared to the UWF 80 E: 1,270×280 mm table (vs 1,000×240), 750 mm X-travel (vs 590 mm), 2.2+2.2 kW motors (vs 0.85\/1.5 + 1.5 kW). The dedicated Z-axis positioning motor with 660 mm\/min rapid feed is a distinguishing feature: it allows for quick head repositioning between operations without manually operating the handwheel. The 12 speed stages on the horizontal spindle (vs 9 on the UWF 80 E) cover a wider range for various applications. The automatic spindle feed with 3 values (0.08, 0.15, 0.25 mm\/rev) allows for repeatable precision machining. The heavy 1,310 kg cast iron structure with dovetail guides ensures stability for intensive cycles. In Krollit customer workshops, it is chosen by professional mechanical workshops with regular production, prototyping and small-batch production labs, and general mechanical processing workshops.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 90 V is the central model in the Bernardo UWF family. Below it: UWF 80 E (1,000×240 mm table, 980 kg weight) and UWF 80 E Vario (with vertical speed inverter). Alongside: UWF 90 V with pneumatic clamping DIN 2080 (subsequent version with quick tool change); UWF 90-1270 (identical 1,270×280 mm table, but 0.85\/1.5 kW vertical motor instead of 2.2 kW: less powerful version). Above: UWF 95 N (1,600×360 mm table, 2,200 kg weight, with pneumatic clamping) for large industrial parts; UWF 110 (360° universal head) and UWF 150 (top of the range with ISO 50, 4 kW motor). The choice between UWF 90 V and UWF 90-1270 depends on the power required on the vertical spindle: the 90 V with 2.2 kW handles more demanding operations; the 90-1270 with 0.85\/1.5 kW is sized for lighter operations at a lower cost. For workshops with regular production on standard steels and alloys, the UWF 90 V is correctly sized.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). At 1,310 kg, it requires a crane or forklift of adequate capacity. Dimensions 1,750 × 1,500 × 2,200 mm: verify laboratory access. ISO 40 adapters, milling cutters, accessories, and original Bernardo spare parts available from stock with 3-5 working day shipping. Customer assistance in Italian available.\u003c\/p\u003e\n\n\u003ch3\u003eWho the UWF 90 V is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eIndustrial machine weighing 1,310 kg and requiring a 400V three-phase line. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshop with regular production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eDouble spindle with 2.2+2.2 kW motors, 1,270×280 mm table, Z-axis positioning motor. Sized for daily professional use on medium-to-large parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrototyping and small-batch production lab\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e12 horizontal and 8 vertical stages cover different speeds for variable materials. Automatic spindle feed with 3 values for repeatable precision machining.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops requiring frequent quick tool changes (the UWF 90 V with DIN 2080 pneumatic clamping is correctly sized); production of large parts beyond the 1,270×280 mm table (UWF 95 N or UWF 150); exclusive use at low powers (the UWF 90-1270 with 0.85\/1.5 kW vertical motor is more economical); high-volume series production (CNC).\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,270 × 280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slots\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable inclination\u003c\/td\u003e\n\u003ctd\u003e-45° \/ +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40 (vertical and horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed\u003c\/td\u003e\n\u003ctd\u003e(8) 90 – 2,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(12) 40 – 1,300 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle travel\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle feed\u003c\/td\u003e\n\u003ctd\u003e0.08 \/ 0.15 \/ 0.25 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravel and capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal travel (X)\u003c\/td\u003e\n\u003ctd\u003e750 mm (manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross travel (Y)\u003c\/td\u003e\n\u003ctd\u003e230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical travel (Z)\u003c\/td\u003e\n\u003ctd\u003e300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle to table distance\u003c\/td\u003e\n\u003ctd\u003e125 – 425 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle to column distance\u003c\/td\u003e\n\u003ctd\u003e240 – 740 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSwiveling head\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead swivel\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e(8) 32 – 700 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRapid Z feed\u003c\/td\u003e\n\u003ctd\u003e660 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ positioning motor\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDRO included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,750 × 1,500 × 2,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 1,310 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 90 V universal milling machine\u003c\/li\u003e\n\u003cli\u003e3-axis digital display ES-12 H with LCD display\u003c\/li\u003e\n\u003cli\u003eDrawbar M 16\u003c\/li\u003e\n\u003cli\u003eHorizontal counter bearing\u003c\/li\u003e\n\u003cli\u003eAdjustable protective device\u003c\/li\u003e\n\u003cli\u003eCover for horizontal milling\u003c\/li\u003e\n\u003cli\u003eISO 40\/B18 and ISO 40\/MT 3 adapters\u003c\/li\u003e\n\u003cli\u003eReducing sleeve with conical MT 3\/2\u003c\/li\u003e\n\u003cli\u003eLong milling arbors ISO 40\/27 mm and ISO 40\/32 mm\u003c\/li\u003e\n\u003cli\u003eCoolant device with tank and pump\u003c\/li\u003e\n\u003cli\u003eLED machine lamp\u003c\/li\u003e\n\u003cli\u003eTool set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the difference with the UWF 90-1270?\u003c\/summary\u003e\n\u003cp\u003eThe two milling machines share the table (1,270×280 mm), travels (750\/230\/300 mm), and spindle type (ISO 40 vertical + horizontal). The only difference is in the power of the vertical spindle: the UWF 90 V has 2.2 kW, the UWF 90-1270 has 0.85\/1.5 kW.\u003c\/p\u003e\n\u003cp\u003eThe UWF 90 V with a more powerful motor is sized for standard professional machining on medium steels and alloys. The UWF 90-1270 with a lower motor is sized for lighter machining or for workshops with limited needs, at a lower cost. For growing workshops or those with varied operations, the UWF 90 V is strategically preferable.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the Z-axis positioning motor really necessary?\u003c\/summary\u003e\n\u003cp\u003eYes, for operations with frequent repositioning. Without a Z motor, the operator must manually operate the vertical axis handwheel for each repositioning (a slow and tiring operation for large movements).\u003c\/p\u003e\n\u003cp\u003eThe 660 mm\/min rapid feed on the Z-axis allows 100 mm movements in 9 seconds. In comparison, the manual handwheel takes 30-60 seconds for an experienced operator. For series production or operations with frequent height changes, the time saving is significant. For static machining on a single piece, the difference is less noticeable.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the purpose of the automatic spindle feed with 3 values?\u003c\/summary\u003e\n\u003cp\u003eIt allows setting the working feed of the spindle for drilling\/boring: 0.08 mm\/rev for hard steels and finishing, 0.15 mm\/rev for standard operations, 0.25 mm\/rev for soft steels and roughing.\u003c\/p\u003e\n\u003cp\u003eThe automatic feed maintains constant speed without operator intervention: the spindle advances by itself during machining while the operator can control other aspects. For precision drilling or boring, it is an essential feature. Without automatic feed, manual pushing produces speed variations that worsen the hole finish.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eThe 750 mm X-travel is 'manual' - what does that mean?\u003c\/summary\u003e\n\u003cp\u003eIt means that the full 750 mm longitudinal travel can only be achieved with manual feed (handwheel). The automatic feed covers a smaller portion of the travel.\u003c\/p\u003e\n\u003cp\u003eOn many universal milling machines, automatic feed is limited to a portion of the travel for mechanical and cost reasons. For standard operations, automatic feed is more than sufficient. For positioning movements at the limits of the travel, the operator uses the handwheel. Check the dimensions of typical parts before purchasing: for parts requiring automatic machining beyond the automatic feed zone, consider higher-end models.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre 12 speed stages on the horizontal spindle too many?\u003c\/summary\u003e\n\u003cp\u003eNo. The wider speed range (40-1,300 rpm) requires more stages to cover it correctly. Horizontal milling typically operates at lower speeds than vertical milling (tools are often larger, e.g., face milling cutters), so the 40-1,300 range is adequate.\u003c\/p\u003e\n\u003cp\u003eOn a horizontal spindle, face milling cutters can have Ø 100-300 mm, requiring specific peripheral speeds for each material. The 12 stages allow finding the most appropriate speed for each tool-material combination. On the UWF 90 V, speed change is mechanical via levers.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694381994312,"sku":"02-1230XL","price":16172.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresatrice_universale_Bernardo_UWF_90_V_con_display_digitale_a_3_assi.jpg?v=1758095632"},{"product_id":"bernardo-fresatrice-universale-uwf-110","title":"Bernardo UWF 110 Universal Milling Machine – 360° universal head, ISO 40, 1,120×260 mm table, 2.2 kW motor, ES-12 H 3-axis DRO","description":"\u003cp\u003eThe Bernardo UWF 110 universal milling machine offers a 360° swiveling universal head, ISO 40 spindle taper, 11 spindle speeds from 45-1,660 rpm, a 1,120×260 mm table with 14 mm T-slots, longitudinal travel of 600 mm \/ transverse travel of 250 mm \/ vertical travel of 400 mm, automatic X and Y feeds (9 stages 24-402 mm\/min), rapid Z feed of 660 mm\/min, Z-axis positioning motor, 2.2 kW motor, grey cast iron structure with dovetail guides and adjustable gibs, polished oil-bath gears. ES-12 H 3-axis DRO included. Weight 1,380 kg. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal head:\u003c\/strong\u003e 360° swiveling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle taper:\u003c\/strong\u003e ISO 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle speeds:\u003c\/strong\u003e 11 steps: 45 – 1,660 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,120 × 260 mm with 14 mm T-slots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravels (X \/ Y \/ Z):\u003c\/strong\u003e 600 \/ 250 \/ 400 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-axis DRO:\u003c\/strong\u003e ES-12 H included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 110 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 110 is a universal milling machine with a unique feature: a 360° swiveling universal head on a single ISO 40 spindle. Unlike other UWF models (90, 95 N) which have a fixed dual spindle (vertical + horizontal), the UWF 110 has a single spindle with full orientation: it allows any angle (vertical, horizontal, inclined) by rotating the head to the desired position. Operational advantage: maximum flexibility for machining with complex angles or non-standard angles (e.g., 30°, 60°, etc. milling). Trade-off compared to the dual spindle: changing orientation requires setup time (rotating the head, re-clamping). For workshops that frequently alternate only vertical and horizontal, the dual spindle is faster; for workshops with various angles, the 360° universal head is more flexible. The polished oil-bath gears are a high-end feature: superior smoothness and many years of durability. The 400 mm Z-travel is the highest in the mid-range UWF: it handles tall workpieces without repositioning. In Krollit customer workshops, it is chosen by precision mechanical workshops, prototyping laboratories with complex geometries, and specialized productions on parts with multiple non-standard angles.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 110 is the Bernardo universal milling machine with a 360° swiveling head (an exclusive feature in the UWF range). Alongside it in the mid-range: UWF 90 V, UWF 90-1270, UWF 95 N (all with fixed dual spindles). Above it: UWF 150 (top of the range, ISO 50, 4 kW motors, 1,650×360 mm table). The key difference between UWF 110 and UWF 90\/95: different machining philosophy. UWF 90\/95 with dual spindles are optimized for quick changes between vertical and horizontal (repetitive standard machining); UWF 110 with a 360° head is optimized for multiple angles (prototyping and complex geometry machining). The UWF 110 table (1,120×260 mm) is intermediate between UWF 90 (1,270×280) and UWF 80 E (1,000×240): a size consistent with the mid-range. For workshops choosing between UWF 95 N and UWF 110, the choice depends on the type of machining: large standard parts → UWF 95 N; medium parts with angles → UWF 110.\u003c\/p\u003e\n\u003ch3\u003eLogistics and Krollit support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). At 1,380 kg, it requires a crane or forklift of adequate capacity. Dimensions 1,570 × 1,470 × 1,660 mm: the most compact in the mid-range UWF (contained height of 1,660 mm). ISO 40 adapters, milling cutters, accessories, and original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch3\u003eWho the UWF 110 is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eProfessional industrial machine. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshop with complex geometries\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e360° universal head for machining with various angles. Suitable for prototyping, mechanical repairs on parts with non-standard geometries.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrototyping laboratory\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFlexibility of the 360° swiveling head + ES-12 H 3-axis DRO + 400 mm Z-travel manage tall workpieces with multiple angles. Solution for production of complex single parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e series production with quick changes only between vertical and horizontal (UWF 90 V or 95 N with dual spindles are faster); large workpieces beyond the 1,120×260 mm table (consider UWF 95 N or UWF 150); workshops without industrial 400V three-phase power; production of small parts that do not require a 360° head (UWF 80 E is more economical).\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,120 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot size\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindle and universal head\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle speeds\u003c\/td\u003e\n\u003ctd\u003e11 steps: 45 – 1,660 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle head tilt\u003c\/td\u003e\n\u003ctd\u003e360° (universal head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravels and capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal travel (X)\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransverse travel (Y)\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical travel (Z)\u003c\/td\u003e\n\u003ctd\u003e400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – table distance\u003c\/td\u003e\n\u003ctd\u003e175 – 520 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e0 – 550 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eX \/ Y feeds\u003c\/td\u003e\n\u003ctd\u003e(9) 24 – 402 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRapid Z feed\u003c\/td\u003e\n\u003ctd\u003e660 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ positioning motor\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConstruction features\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStructure\u003c\/td\u003e\n\u003ctd\u003eGrey cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuides\u003c\/td\u003e\n\u003ctd\u003eDovetail with adjustable gibs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGears\u003c\/td\u003e\n\u003ctd\u003ePolished in oil bath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIncluded DRO\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,570 × 1,470 × 1,660 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 1,380 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 110 universal milling machine\u003c\/li\u003e\n\u003cli\u003eES-12 H 3-axis digital display with LCD screen\u003c\/li\u003e\n\u003cli\u003eLED machine lamp\u003c\/li\u003e\n\u003cli\u003eCoolant device with tank and pump\u003c\/li\u003e\n\u003cli\u003eCentralized lubrication\u003c\/li\u003e\n\u003cli\u003eOutboard support\u003c\/li\u003e\n\u003cli\u003eLong milling arbor Ø 32 mm\u003c\/li\u003e\n\u003cli\u003eAutomatic X and Y feeds\u003c\/li\u003e\n\u003cli\u003ePositioning motor for Z-axis\u003c\/li\u003e\n\u003cli\u003eChip and liquid collection tray\u003c\/li\u003e\n\u003cli\u003eAdjustable protective device\u003c\/li\u003e\n\u003cli\u003eTool set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat does '360° universal head' mean?\u003c\/summary\u003e\n\u003cp\u003eThe spindle head can rotate 360° around the longitudinal axis: the operator can position the milling cutter in any orientation (vertical, horizontal, inclined at any angle). It is functionally equivalent to the dual spindle of other UWF models, but with greater flexibility.\u003c\/p\u003e\n\u003cp\u003eUWF models with dual spindles only have 2 possible orientations (vertical 90° and horizontal 0°). The UWF 110 with a 360° head allows any angle (15°, 30°, 45°, 60°, etc.). The advantage is noticeable on parts with non-standard angle milling. The trade-off is the orientation change time (rotating the head, clamping it), which is longer than the spindle change on UWF 90\/95 models.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I use the UWF 110 as a vertical-only milling machine?\u003c\/summary\u003e\n\u003cp\u003eYes. The universal head can be locked in the vertical position for continuous vertical use. In that use, the machine behaves like a standard vertical milling machine.\u003c\/p\u003e\n\u003cp\u003eFor workshops that primarily work vertically but occasionally require angles, the UWF 110 is correctly sized. For workshops that always work only vertically, a standard vertical milling machine may be more economical and ergonomic. The UWF 110 repays its complexity only if the 360° adjustability is used regularly.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre 11 speed steps few compared to the 8 steps of the UWF 90?\u003c\/summary\u003e\n\u003cp\u003eThere are 11 steps in addition to (vs 8+12 on the UWF 90). The UWF 110 has a single spindle with 11 steps covering the 45-1,660 rpm range continuously. The UWF 90 has 8 steps for vertical + 12 for horizontal, but these are different spindles.\u003c\/p\u003e\n\u003cp\u003eFor practical use, the difference is small: 11 steps adequately cover the range. The optimal speed for each tool-material combination is rarely exactly one of the predefined values, regardless of the number of steps. For fine optimization, consider the UWF 80 E Vario with inverter (continuous speed).\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I do tapping (internal threading) with the UWF 110?\u003c\/summary\u003e\n\u003cp\u003eYes, with appropriate taps and accessories. The spindle rotation is reversible: an essential feature for extracting the tap from the threaded hole.\u003c\/p\u003e\n\u003cp\u003eFor precision tapping, the use of specific self-reversing tapping chucks, available as accessories, is recommended. The UWF 110 with a universal head is particularly suitable for tapping on parts with complex geometries: the 360° adjustability allows the tap to be positioned at the angle required by the design.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the 400 mm Z-travel really the highest in the mid-range?\u003c\/summary\u003e\n\u003cp\u003eYes. UWF 90 V and UWF 90-1270 have 300 mm Z-travel, UWF 80 E has 320 mm, UWF 95 N has 400 mm (same as UWF 110), UWF 150 has 390 mm. The UWF 110 and UWF 95 N share the most extended Z-travel in the UWF mid-range.\u003c\/p\u003e\n\u003cp\u003eThe 400 mm Z-travel allows machining on tall workpieces without repositioning. For workpieces over 400 mm in height, multiple pass planing or machines with greater travels are needed. For most standard machining, 400 mm is sufficient.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694389268808,"sku":"02-1267XL","price":16989.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresatrice_universale_Bernardo_UWF_110_con_display_digitale_a_3_assi.png?v=1758094753"},{"product_id":"fresatrici-universali-bernardo-uwf-150","title":"Bernardo UWF 150 Universal Milling Machine – top of the range, ISO 50, double spindle, 1,650×360 mm table, 4 kW motors, 3-axis DRO","description":"\u003cp\u003eThe Bernardo UWF 150 universal milling machine is the top of the line among Bernardo universal milling machines. It features ISO 50 vertical and horizontal spindles, 12-stage vertical speed 60-1,750 rpm and 12-stage horizontal speed 58-1,800 rpm, a 1,650×360 mm table inclinable ±45° with 14 mm T-slots, longitudinal travel 1,350 mm \/ cross travel 290 mm \/ vertical travel 390 mm, 8 automatic feeds on all axes, rapid feeds 1,290\/1,208\/513 mm\/min (X\/Y\/Z), 4 kW vertical + 4 kW horizontal motors, solid cast iron structure, rectangular guides on Y and Z, hardened oil-bath gears, and a swiveling control panel. DRO ES-12 H 3 axes included. Weight 2,250 kg. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindles:\u003c\/strong\u003e Vertical and horizontal ISO 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical speed:\u003c\/strong\u003e 12 stages: 60 – 1,750 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal speed:\u003c\/strong\u003e 12 stages: 58 – 1,800 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,650 × 360 mm inclinable ±45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel (X \/ Y \/ Z):\u003c\/strong\u003e 1,350 \/ 290 \/ 390 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 4 kW vertical + 4 kW horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 2,250 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 150 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 150 is the top of the range of Bernardo universal milling machines, sized for industrial workshops with professional high-precision production on large workpieces. A leap in class compared to the UWF 90\/95: ISO 50 spindle taper (vs ISO 50 - larger and more powerful tool holders), 4 kW motors (vs 2.2 kW), 1,650×360 mm table (the largest in the family). The ISO 50 taper is an industrial feature: it allows for larger tools (milling cutters up to Ø 100-150 mm) with higher torque transmission. The 4 kW motors (more than double the 2.2 kW of the lower UWF models) handle heavy-duty machining on hard steels and large tools without compromise. The rectangular guides on Y and Z combine rigidity on two of the three axes most stressed during milling. The swiveling control panel is an ergonomic feature: the operator rotates the controls to the most comfortable position based on the machining operation. The automatic feeds on all 3 axes (8 stages) and rapid feeds of 1,290\/1,208\/513 mm\/min (X\/Y\/Z) optimize cycle times for series production. In Krollit customer workshops, it is chosen by industrial mechanical workshops with precision production on large workpieces, metal fabrication shops with complete machining operations, and laboratories that require the highest professional level from Bernardo in universal milling machines.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 150 is the pinnacle of the Bernardo UWF range, the only one with an ISO 50 taper. Below it: UWF 95 N (1,600×360 mm table, ISO 40, 2.2 kW motors, 2,200 kg weight) for standard professional production; UWF 110 (360° universal head, 1,120×260 mm table, ISO 40); UWF 90 V and UWF 90-1270 (1,270×280 table, ISO 40); UWF 80 E and UWF 80 E Vario (1,000×240 table, ISO 40). Key difference UWF 150 vs UWF 95 N: ISO 50 taper (vs ISO 40) and 4 kW motors (vs 2.2 kW). For heavy industrial machining on hard steels or large tools (over Ø 50 mm), the UWF 150 is correctly sized. For standard production on mild steels and medium alloys with tools up to Ø 50 mm, the UWF 95 N is correctly sized at a significantly lower cost. The investment in UWF 150 is justified for workshops with high power requirements, ISO 50 tools, and continuous intensive cycles. For workshops that already have ISO 40 tool sets, switching to ISO 50 requires tool updates: plan accordingly.\u003c\/p\u003e\n\u003ch3\u003eLogistics and Krollit support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days for Southern Italy). At 2,250 kg, it requires a crane of adequate capacity and a properly sized industrial floor. Dimensions 2,250 × 2,000 × 1,995 mm: check access to the workshop. ISO 50 adapters, milling cutters, accessories, and original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch3\u003eWho the UWF 150 is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eTop-of-the-range industrial machine. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial workshop with heavy production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eISO 50 taper, 4 kW motors for machining on hard steels and large tools. Rectangular guides on Y and Z, 2,250 kg structure for stability in continuous intensive cycles.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal fabrication shop with complete machining\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e1,650×360 mm table and 1,350 mm X-travel handle large industrial workpieces. Double ISO 50 spindle for high-power vertical and horizontal milling.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops with ISO 40 tool sets and a limited budget (the UWF 95 N is correctly sized at a significantly lower cost); production on workpieces within a 1,270 mm table (UWF 90 V or 90-1270); workshops without a properly sized industrial floor or without an industrial 400V three-phase line; operations requiring a 360° universal head (UWF 110 with exclusive feature).\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,650 × 360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slot size\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable inclination\u003c\/td\u003e\n\u003ctd\u003e-45° \/ +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed\u003c\/td\u003e\n\u003ctd\u003e(12) 60 – 1,750 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(12) 58 – 1,800 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravel and capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal travel (X)\u003c\/td\u003e\n\u003ctd\u003e1,350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross travel (Y)\u003c\/td\u003e\n\u003ctd\u003e290 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical travel (Z)\u003c\/td\u003e\n\u003ctd\u003e390 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – table distance\u003c\/td\u003e\n\u003ctd\u003e160 – 550 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e230 – 900 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal \/ cross feeds\u003c\/td\u003e\n\u003ctd\u003e(8) 22-420 \/ 22-393 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical feeds\u003c\/td\u003e\n\u003ctd\u003e(8) 10 – 168 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRapid feeds (X\/Y\/Z)\u003c\/td\u003e\n\u003ctd\u003e1,290 \/ 1,208 \/ 513 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal motor power\u003c\/td\u003e\n\u003ctd\u003e4.0 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical motor power\u003c\/td\u003e\n\u003ctd\u003e4.0 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConstruction features\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStructure\u003c\/td\u003e\n\u003ctd\u003eSolid cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuides\u003c\/td\u003e\n\u003ctd\u003eRectangular on Y and Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGears\u003c\/td\u003e\n\u003ctd\u003eHardened in oil bath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl panel\u003c\/td\u003e\n\u003ctd\u003eSwiveling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDRO included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3 axes with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e2,250 × 2,000 × 1,995 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 2,250 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 150 universal milling machine\u003c\/li\u003e\n\u003cli\u003e3-axis digital display ES-12 H with LCD display\u003c\/li\u003e\n\u003cli\u003eDrawbar M 24\u003c\/li\u003e\n\u003cli\u003eLED machine lamp\u003c\/li\u003e\n\u003cli\u003eCoolant device with tank and pump\u003c\/li\u003e\n\u003cli\u003eHorizontal counter bearing\u003c\/li\u003e\n\u003cli\u003eUniversal protective device\u003c\/li\u003e\n\u003cli\u003eChip and coolant tray\u003c\/li\u003e\n\u003cli\u003eTool set for use and maintenance\u003c\/li\u003e\n\u003cli\u003eAutomatic feed on X, Y, and Z axes\u003c\/li\u003e\n\u003cli\u003eLong milling arbor ISO 50\/27 mm and ISO 50\/32 mm\u003c\/li\u003e\n\u003cli\u003eConical tool holder ISO 50\/32 mm\u003c\/li\u003e\n\u003cli\u003eCentral lubrication for X, Y, and Z\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the key difference between ISO 50 and ISO 40?\u003c\/summary\u003e\n\u003cp\u003eThe ISO 50 has a larger taper (nominal Ø 69 mm vs 44 mm for ISO 40), drawbar M24 (vs M16). It transmits significantly higher torque: ISO 50 tools are dimensioned for heavy industrial machining.\u003c\/p\u003e\n\u003cp\u003eFor standard operations with tools up to Ø 50 mm, ISO 40 is sufficient. For large tools (Ø 80-150 mm) or heavy-duty machining on hard steels, ISO 50 is correctly sized. The ISO 50 taper is a characteristic of professional industrial milling machines; among Bernardo UWF models, only the 150 offers it.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eDo the 4+4 kW motors require special electrical sizing?\u003c\/summary\u003e\n\u003cp\u003eYes. Only one spindle operates at a time (4 kW), but at startup, it requires peak power that necessitates a properly sized industrial meter. For workshops without an adequate industrial power line, check with your electricity provider.\u003c\/p\u003e\n\u003cp\u003eA 4 kW motor at startup can reach peaks of 6-8 kW: industrial meters of 10-15 kW are recommended. For workshops with other machines running simultaneously, the total sizing is important. The UWF 150 is sized for industrial workshops with an adequate electrical line.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow do the rectangular guides on Y and Z (and not X) perform?\u003c\/summary\u003e\n\u003cp\u003eThe rectangular guides on Y and Z provide maximum rigidity on the two axes most stressed during milling (feed and depth). The X-axis (longitudinal movement of the workpiece) is less stressed and maintains adequate standard guides.\u003c\/p\u003e\n\u003cp\u003eThe design choice optimizes the rigidity\/cost ratio: rectangular guides on all 3 axes would be more expensive without proportional benefits. On the two most critical axes (transverse Y, vertical Z), the rectangular guides maintain precision under load even with large tools and heavy workpieces.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the swiveling control panel really useful?\u003c\/summary\u003e\n\u003cp\u003eYes. It allows the operator to position the controls in the most ergonomic area based on the working position: in front of the machine for standard operations, laterally for machining large or angular workpieces.\u003c\/p\u003e\n\u003cp\u003eOn traditional milling machines with fixed controls, the operator must adapt to the position of the controls. For prolonged operations, this lack of ergonomics leads to fatigue. The swiveling panel is a characteristic of high-end industrial milling machines; in Bernardo UWF models, it is exclusive to the 150.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat type of machining justifies the investment in UWF 150?\u003c\/summary\u003e\n\u003cp\u003eIndustrial machining of large and heavy workpieces (machine bases, industrial molds, machine components); milling on hard steels with large tools; series production with intensive cycles; precision tolerances on voluminous workpieces.\u003c\/p\u003e\n\u003cp\u003eFor general artisan workshops, the UWF 95 N (ISO 40, 2.2 kW) or the UWF 90 models are correctly sized at a significantly lower cost. For industrial workshops with regular precision production on heavy workpieces, the UWF 150 repays the difference with greater productivity and tighter tolerances.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694399820104,"sku":"02-1280XL","price":27836.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresatrice_universale_Bernardo_UWF_150_con_display_digitale_a_3_assi.png?v=1758093298"},{"product_id":"bernardo-fresatrice-universale-uwf-80-e","title":"Bernardo UWF 80 E Universal Milling Machine – ISO 40 vertical and horizontal, 3-axis DRO ES-12 H, table 1,000×240 mm tiltable ±45°","description":"\u003cp\u003eThe Bernardo UWF 80 E universal milling machine offers ISO 40 vertical and horizontal spindles, 8 vertical speed stages (115-1,750 rpm) and 9 horizontal speed stages (60-1,350 rpm), a 1,000×240 mm cross table inclinable by ±45° with 14 mm T-slots, a milling head adjustable by -90°\/+90°, longitudinal travel of 590 mm \/ transverse travel of 180 mm \/ vertical travel of 320 mm, automatic X and Y feeds including rapid traverse, a 0.85\/1.5 kW vertical motor + 1.5 kW horizontal motor, a solid cast iron structure with dovetail guides, and precision bearings (runout ≤0.015 mm). DRO ES-12 H 3-axis included. Weight 980 kg. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindles:\u003c\/strong\u003e Vertical and horizontal ISO 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical speed:\u003c\/strong\u003e 8 stages: 115 – 1,750 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal speed:\u003c\/strong\u003e 9 stages: 60 – 1,350 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,000 × 240 mm inclinable ±45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravels (X \/ Y \/ Z):\u003c\/strong\u003e 590 \/ 180 \/ 320 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-axis DRO:\u003c\/strong\u003e ES-12 H included as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 980 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 80 E and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 80 E is the entry-level universal milling machine in the UWF family, sized for general mechanical workshops needing a double spindle. A distinctive feature of UWF compared to multifunctional MFM machines: dedicated double spindle (vertical + horizontal), both with ISO 40 taper. The operational advantage is quick changeover between vertical and horizontal milling without repositioning the head: for operations that frequently alternate these two geometries, efficiency is significantly higher than multifunctional machines with a single adjustable head. The 1,000×240 mm cross table inclinable up to ±45° and the -90°\/+90° adjustable milling head allow complex angular machining. Precision bearings (runout ≤0.015 mm) are a high-end construction feature, typically absent in entry-level milling machines from other brands. The clutch for easy switching between manual and fine feed, and the right\/left rotation for threading operations, are professional features that expand operational capabilities. In Krollit customer workshops, it is chosen by mechanical workshops with single-piece and small-batch production, prototyping labs, mechanical repair shops, and professional artisan workshops.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 80 E is the entry-level model in Bernardo's UWF family. Above it in the family: UWF 80 E Vario (same table and travels, 2.2 kW vertical motor with Delta-Frequency inverter for continuous speed); UWF 90 V and UWF 90-1270 (1,270×280 mm table, 750\/230\/300 mm travels, 2.2 kW motor); UWF 95 N (1,600×360 mm table, 1,300\/300\/400 mm travels, 2,200 kg weight) for large pieces; UWF 110 (360° universal head, 1,120×260 mm table) with characteristic 360° adjustability; UWF 150 (top of the range, ISO 50, 4 kW motor, 1,650×360 mm table, 2,250 kg weight). The difference between UWF 80 E vs MFM 230 Super: UWF 80 E has a dedicated double spindle (vertical + horizontal), MFM 230 has a single spindle with an adjustable universal head. For workshops that frequently alternate vertical and horizontal milling, the UWF 80 E is more efficient; for workshops that primarily work vertically with multiple angles, the MFM 230 with a universal head is more flexible.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). At 980 kg, it requires a crane or forklift of adequate capacity. Dimensions 1,500 × 1,430 × 2,100 mm. ISO 40 adapters, cutters, accessories, and original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the UWF 80 E for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eIndustrial machine weighing 980 kg and requiring a 400V three-phase line. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral mechanical workshop\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eDouble ISO 40 spindle (vertical + horizontal) for quick changes between different geometries. ES-12 H 3-axis DRO included and precision bearings (runout ≤0.015 mm) offer precision production.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrototyping \/ mechanical repair lab\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eAdjustable head and ±45° inclinable table handle complex geometries. Clutch for fine feed and right\/left rotation expand operational capabilities.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e high-volume series production (consider CNC milling machines); parts regularly requiring continuous spindle speed (the UWF 80 E Vario with inverter is correctly sized); workshops without an industrial 400V three-phase line; exclusively vertical machining with multiple angles (the MFM 230 Super is more flexible).\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,000 × 240 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-slots\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable inclination\u003c\/td\u003e\n\u003ctd\u003e-45° \/ +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40 (vertical and horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed\u003c\/td\u003e\n\u003ctd\u003e(8) 115 – 1,750 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(9) 60 – 1,350 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle travel\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing runout\u003c\/td\u003e\n\u003ctd\u003e≤ 0.015 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravels and capacities\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal travel (X)\u003c\/td\u003e\n\u003ctd\u003e590 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransverse travel (Y)\u003c\/td\u003e\n\u003ctd\u003e180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical travel (Z)\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – table distance\u003c\/td\u003e\n\u003ctd\u003e0 – 375 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e230 – 685 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAdjustable head\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMilling head orientation\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds (X)\u003c\/td\u003e\n\u003ctd\u003e(8) 32 – 700 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic feeds\u003c\/td\u003e\n\u003ctd\u003eX and Y (including rapid traverse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical motor power\u003c\/td\u003e\n\u003ctd\u003e0.85 \/ 1.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal motor power\u003c\/td\u003e\n\u003ctd\u003e1.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eRight\/left (for threading)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDRO included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,500 × 1,430 × 2,100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 980 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 80 E universal milling machine\u003c\/li\u003e\n\u003cli\u003eES-12 H 3-axis digital display with LCD screen\u003c\/li\u003e\n\u003cli\u003eDrawbar M 16\u003c\/li\u003e\n\u003cli\u003eLED machine lamp\u003c\/li\u003e\n\u003cli\u003eCoolant device with tank and pump\u003c\/li\u003e\n\u003cli\u003eAutomatic feed for X-axis\u003c\/li\u003e\n\u003cli\u003eAutomatic feed for Y-axis\u003c\/li\u003e\n\u003cli\u003eAdapter ISO 40 \/ MT 3\u003c\/li\u003e\n\u003cli\u003eAdapter ISO 40 \/ B 18\u003c\/li\u003e\n\u003cli\u003eTaper reduction sleeve MT 3\/2\u003c\/li\u003e\n\u003cli\u003eLong milling arbor ISO 40\/27 mm\u003c\/li\u003e\n\u003cli\u003eAdjustable protective cover\u003c\/li\u003e\n\u003cli\u003eProtective cover for horizontal milling\u003c\/li\u003e\n\u003cli\u003eHorizontal counter bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the advantage of the double spindle compared to the adjustable head of MFM machines?\u003c\/summary\u003e\n\u003cp\u003eThe quick changeover between vertical and horizontal milling without changing the setup. With the adjustable head of MFM machines, you have to loosen the locking system, rotate the head, and then re-tighten. With the UWF's double spindle, you just switch the active tool.\u003c\/p\u003e\n\u003cp\u003eFor operations that frequently alternate between the two geometries (e.g., typical for complex mechanical component machining), the double spindle significantly saves time. For predominantly vertical operations with multiple angles, the MFM's adjustable head is more flexible. The choice depends on the typical type of work in the workshop.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat does 'runout ≤ 0.015 mm' mean?\u003c\/summary\u003e\n\u003cp\u003eIt means that during rotation, the spindle maintains its trajectory with deviations of less than 0.015 mm from the theoretical center. It is a measure of the spindle's rotational precision.\u003c\/p\u003e\n\u003cp\u003eRunout directly affects the quality of the surface finish and the dimensional accuracy of the parts. A runout of 0.015 mm is a high professional value: entry-level milling machines from other brands typically have 0.02-0.05 mm. For precision production (H7 tolerances or higher), spindle runout is a critical characteristic.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow does the clutch for manual-fine feed work?\u003c\/summary\u003e\n\u003cp\u003eIt allows instant switching from automatic rapid traverse to fine manual feed by simply disengaging the clutch. Useful for precise positioning before starting a machining operation.\u003c\/p\u003e\n\u003cp\u003eWithout a clutch, to feed slowly, you need to mechanically set the minimum feed (a time-consuming operation). With a clutch, the operator disengages and proceeds manually with the handwheel, then re-engages for automatic feed. This is a standard professional feature on Bernardo universal milling machines.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs right\/left rotation only for threading?\u003c\/summary\u003e\n\u003cp\u003eMainly yes. For tapping (internal threading with a rotating tap), you need to reverse the direction of rotation to extract the tap from the hole. Left rotation can also be used for counter-grain finishing on specific materials.\u003c\/p\u003e\n\u003cp\u003eWithout rotation reversal, tapping requires the use of specific accessories (self-reversing tap holders) or complex manual procedures. The integrated right\/left rotation on the UWF 80 E simplifies the operation: the tap screws in with right rotation, and unscrews with left rotation. This is a standard professional feature in Bernardo UWF machines.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I perform precision machining (H7 tolerances) with the UWF 80 E?\u003c\/summary\u003e\n\u003cp\u003eYes, with adequate technique. The spindle runout (≤0.015 mm), the 3-axis DRO, and the solid cast iron structure (980 kg) are sized for precision production. H7 tolerances are achievable with appropriate tools and correct operator technique.\u003c\/p\u003e\n\u003cp\u003eThe final precision also depends on: clamping rigidity, tool quality, cutting parameters (speed, feed, depth), operator skill. The UWF 80 E as a machine is correctly sized for this precision range; the final level depends on the specific machining expertise.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694411616584,"sku":"02-1211BXL","price":12078.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresatrice_universale_Bernardo_UWF_80_E_con_display_digitale_a_3_assi.png?v=1758094025"},{"product_id":"bernardo-fresatrici-uwf-80e-vario","title":"Bernardo UWF 80 E Vario Universal Milling Machine – ISO 40, variable speed vertical spindle (Delta-Frequency inverter), ES-12 H 3-axis DRO","description":"\u003cp\u003eThe Bernardo UWF 80 E Vario universal milling machine offers ISO 40 vertical and horizontal spindles, continuously variable vertical speed 75-600\/250-2,000 rpm with Delta-Frequency inverter, 9-stage horizontal speed 60-1,350 rpm, 1,000×240 mm table tiltable ±45° with 14 mm T-slots, ±90° swiveling head, travels 590\/175\/320 mm, automatic X and Y feeds with rapid traverse, 2.2 kW vertical motor + 1.5 kW horizontal motor, 1,010 kg cast iron structure. ES-12 H 3-axis DRO included. Manufactured in Austria, distributed in Italy by Krollit as official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical spindle:\u003c\/strong\u003e ISO 40 with variable speed 75-600 \/ 250-2,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal spindle:\u003c\/strong\u003e ISO 40, 9 stages: 60 – 1,350 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter:\u003c\/strong\u003e Delta-Frequency for continuous vertical spindle speed regulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,000 × 240 mm tiltable ±45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical motor:\u003c\/strong\u003e 2.2 kW (vs 0.85\/1.5 kW of the basic UWF 80 E)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-axis DRO:\u003c\/strong\u003e ES-12 H included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,010 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 80 E Vario and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 80 E Vario is the professional superior version of the UWF 80 E, distinguished by its variable speed vertical spindle (Delta-Frequency inverter) and higher motor power (2.2 kW vs 0.85\/1.5 kW). The inverter allows continuous adjustment of the vertical speed between 75-600 rpm (low range) and 250-2,000 rpm (high range): the advantage compared to the 8 staged speeds of the basic UWF 80 E is the ability to find the optimal speed for each tool-material combination. On hardened steels, the optimal speed may fall between two predefined stages: with an inverter, the exact correct value can be set. Optimal torque in all working conditions is a characteristic of the Delta-Frequency inverter, which maintains torque even at low speeds (a critical situation for motors without an inverter). The basic mechanical characteristics (table, travels, dual spindle, ES-12 H DRO included) are identical to the UWF 80 E. In Krollit customer workshops, it is chosen by mechanical workshops with precision requirements, laboratories working with different materials at variable optimal speeds, and prototype production requiring optimization of cutting parameters.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 80 E Vario is the 'Vario' version (with inverter) of the UWF 80 E. Key difference UWF 80 E vs UWF 80 E Vario: same mechanical machine, but the vertical spindle has a Delta-Frequency inverter for continuous speed (vs 8 stages). Superior vertical motor (2.2 vs 0.85\/1.5 kW) to correctly manage the extended speed range. For workshops working with standard materials with tools suitable for predefined speeds, the basic UWF 80 E is correctly dimensioned with a lower cost. For workshops that alternate different materials (steel, aluminum, plastic, special alloys) and seek optimal speed for each, the UWF 80 E Vario repays the difference. The difference is similar to that between entry-level milling machines and CNC milling machines: the principle of optimizing cutting parameters. Above it in the family: UWF 90 V (1,270×280 mm table, 2.2+2.2 kW motors), UWF 90-1270, UWF 95 N (mid-range top), UWF 110 (360° universal head), UWF 150 (top of the range with ISO 50).\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). At 1,010 kg, it requires a crane or forklift of adequate capacity. Dimensions 1,600 × 1,500 × 2,100 mm. ISO 40 adapters, milling cutters, accessories, and original Bernardo spare parts available from stock with 3-5 business days shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch3\u003eWho the UWF 80 E Vario is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eProfessional industrial machine. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshop with variable materials\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eDelta-Frequency inverter for continuous speed: optimizes cutting parameters for every material (steel, aluminum, alloys). 2.2 kW vertical motor manages stable torque at all speeds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrototyping laboratory \/ precision production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eContinuous speed allows fine optimization of cutting parameters for high-quality finishes. The basic UWF 80 E with 8 stages may require compromises on parameters.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops with standard processing on single materials (the basic UWF 80 E with 8 stages is correctly dimensioned with a lower cost); workshops without a 400V three-phase line; large parts beyond the 1,000×240 mm table (consider UWF 90 V or higher); high-volume series production (consider CNC).\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,000 × 240 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable T-slots\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable tilt\u003c\/td\u003e\n\u003ctd\u003e-45° \/ +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40 (vertical and horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed (Vario)\u003c\/td\u003e\n\u003ctd\u003e75-600 \/ 2,500-2,000 rpm continuously\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(9) 60 – 1,350 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle stroke\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInverter\u003c\/td\u003e\n\u003ctd\u003eDelta-Frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravels and capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTravels (X \/ Y \/ Z)\u003c\/td\u003e\n\u003ctd\u003e590 \/ 175 \/ 320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – table distance\u003c\/td\u003e\n\u003ctd\u003e55 – 375 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e225 – 650 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSwiveling head\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds (x)\u003c\/td\u003e\n\u003ctd\u003e(8) 32 – 700 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic feeds\u003c\/td\u003e\n\u003ctd\u003eX and Y (with rapid traverse included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal motor power\u003c\/td\u003e\n\u003ctd\u003e1.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDRO included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,600 × 1,500 × 2,100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1,010 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 80 E Vario universal milling machine\u003c\/li\u003e\n\u003cli\u003eES-12 H 3-axis digital display with LCD\u003c\/li\u003e\n\u003cli\u003eDrawbar M16\u003c\/li\u003e\n\u003cli\u003eIntegrated LED lamp\u003c\/li\u003e\n\u003cli\u003eCoolant device\u003c\/li\u003e\n\u003cli\u003eDelta-Frequency inverter\u003c\/li\u003e\n\u003cli\u003eAutomatic feed on X and Y axes\u003c\/li\u003e\n\u003cli\u003eISO 40\/MT 3 and ISO 40\/B18 adapters\u003c\/li\u003e\n\u003cli\u003eMorse taper sleeve MT 3\/2\u003c\/li\u003e\n\u003cli\u003eLong milling arbor ISO 40\/27 mm\u003c\/li\u003e\n\u003cli\u003eHorizontal counter support\u003c\/li\u003e\n\u003cli\u003eAdjustable guards and horizontal milling cover\u003c\/li\u003e\n\u003cli\u003eService tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat does 'Delta-Frequency inverter' mean?\u003c\/summary\u003e\n\u003cp\u003eIt is an inverter (electronic frequency converter) of the Delta brand that supplies the motor with variable frequency, generating continuously adjustable rotational speed. It maintains optimal torque even at low speeds.\u003c\/p\u003e\n\u003cp\u003eAsynchronous motors powered directly by the mains (fixed 50 Hz) generate reduced torque at low speeds. The inverter modulates the frequency, maintaining constant torque: at 5 Hz (1\/10 of the nominal speed), the torque is still 90-100% of the nominal. This feature is crucial for heavy milling at low speeds, a typical situation for hard steels and large tools.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre the 2 ranges 75-600 and 250-2,000 separate?\u003c\/summary\u003e\n\u003cp\u003eYes, they are 2 separate speed ranges, selectable via mechanical gearbox. Within each range, the speed is continuously adjusted via the inverter.\u003c\/p\u003e\n\u003cp\u003eThe dual range is a design feature: a single 75-2,000 range would be possible but with compromises on torque at the extremes. The 2 separate ranges (low range for high torque, high range for high speeds) offer optimal performance across the entire range. For most operations, a single range covers the need; changing is only necessary for radical changes in operation.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eDoes the UWF 80 E Vario replace the basic UWF 80 E?\u003c\/summary\u003e\n\u003cp\u003eNo, they are 2 parallel models with different characteristics. The basic UWF 80 E is entry-level with 8 predefined stages; the UWF 80 E Vario is professional with continuous speed. Both remain in the Bernardo catalog for workshops with different needs.\u003c\/p\u003e\n\u003cp\u003eFor workshops with standard production on known materials, the basic UWF 80 E is sufficient and more economical. For workshops with needs to optimize cutting parameters (variety of materials, prototypes, precision production), the UWF 80 E Vario justifies the difference. The price difference reflects the inverter, the more powerful motor, and the electrical complexity.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow reliable is the Delta-Frequency inverter?\u003c\/summary\u003e\n\u003cp\u003eDelta is one of the leading industrial inverter manufacturers in the world, with recognized reliability in continuous industrial applications. Operating life is typically over 10 years in standard daily use.\u003c\/p\u003e\n\u003cp\u003eInverters are electronic components with a finite lifespan (vs mechanical components of the machine). In case of failure, replacing the inverter is a standard maintenance operation (1-2 hours of intervention). The replacement cost is low compared to the value of the machine. For intensive use, it is recommended to monitor operating conditions (temperature, cleanliness of air intakes) to maximize lifespan.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhich range should be used for milling on standard steel?\u003c\/summary\u003e\n\u003cp\u003eFor standard steels (S235, C40) with Ø 10-20 mm tools, the high range 250-2,000 rpm is generally suitable. For large tools (Ø over 50 mm) or hardened steels, the low range 75-600 rpm is more appropriate.\u003c\/p\u003e\n\u003cp\u003eThe optimal cutting speed depends on the tool diameter and material: the formula is V = π × D × n \/ 1,000 (V in m\/min, D in mm, n in rpm). For mild steel with a Ø 12 mm HSS cutter, a typical V is 25-30 m\/min, corresponding to approximately 700-800 rpm. For carbide, the same operation can go up to 60-100 m\/min (1,500-2,500 rpm). Fine continuous adjustment with the inverter allows finding the optimal value.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694423150920,"sku":"02-1212BXL","price":13298.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Fresatrice_universale_UWF_80_E_Vario_con_DRO_3_assi.png?v=1758036200"},{"product_id":"bernardo-fresatrici-uwf-90-1270-serraggio","title":"Bernardo UWF 90-1270 Universal Milling Machine with DRO ES-12 H + pneumatic clamping DIN 2080 – table 1,270 × 280 mm, ISO 40, vertical + horizontal spindles, 1.5+2.2 kW motor, 1,300 kg weight","description":"\u003cp\u003eThe Bernardo UWF 90-1270 universal milling machine with pneumatic clamping is the full-accessory version of the basic UWF 90-1270, with a 3-axis digital display ES-12 H and a DIN 2080 pneumatic tool clamping system included as standard. This is an industrial machine for mechanical workshops and production departments, featuring an ISO 40 spindle taper, a 1,270 × 280 mm table with 14 mm T-slots, vertical spindle speeds (8) 115-1,750 rpm, horizontal spindle speeds (12) 40-1,300 rpm, a 125 mm spindle stroke, X\/Y\/Z travels of 750\/230\/300 mm, a ±90° tilting head, a ±45° swiveling table, longitudinal feeds (8) 32-700 mm\/min, and a 660 mm\/min Z-axis rapid traverse. The vertical spindle motor is 0.85\/1.5 kW, and the horizontal spindle motor is 2.2 kW. It has a cast iron structure with dovetail guides, a weight of 1,300 kg, and machine dimensions of 1,750 × 1,500 × 2,200 mm. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital display ES-12 H:\u003c\/strong\u003e 3-axis LCD display with 0.005 mm resolution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic clamping system:\u003c\/strong\u003e DIN 2080 with M16 drawbar for quick tool changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle taper:\u003c\/strong\u003e ISO 40 (vertical and horizontal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,270 × 280 mm with 14 mm T-slots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical spindle speed:\u003c\/strong\u003e (8) 115-1,750 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal spindle speed:\u003c\/strong\u003e (12) 40-1,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX\/Y\/Z travels:\u003c\/strong\u003e 750\/230\/300 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic feeds:\u003c\/strong\u003e X and Y axes with rapid traverse, Z-axis positioning motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead tilt:\u003c\/strong\u003e -90° \/ +90°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight and power:\u003c\/strong\u003e 1,300 kg, vertical motor 0.85\/1.5 kW + horizontal 2.2 kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 90-1270 with pneumatic clamping and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 90-1270 in its complete configuration with DRO ES-12 H + DIN 2080 pneumatic clamping is the full-option version of the basic UWF 90-1270, sized for mechanical workshops and production departments that require maximum productivity in tool changes and precision in machining. Distinctive features: the 3-axis digital display ES-12 H with 0.005 mm resolution replaces manual vernier readings on graduated scales, significantly reducing setup times and positioning errors. The DIN 2080 pneumatic clamping system with M16 drawbar replaces manual key clamping, reducing tool change time from 30-60 seconds to 5-10 seconds: a crucial feature for series production with frequent tool changes. The machine is equipped with both vertical and horizontal spindles with ISO 40 taper for interchangeable use (standard vertical milling, horizontal milling for long grooves and profile machining). In Krollit customers' workshops, the UWF 90-1270 is chosen by mechanical workshops with repetitive production of unique parts and small series, technical schools and professional training workshops, prototyping departments, and equipment and mold construction workshops.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF universal milling machine range is organized by table size and features: UWF 80 E and UWF 80 E Vario (compact table) for craft workshops; UWF 90 V and UWF 90 V Pneumatico (medium table) for professional workshops; UWF 90-1270, UWF 90-1270 with pneumatic clamping, UWF 95 N, UWF 110, and UWF 150 for industrial workshops with progressively larger machines.\n\nThe UWF 90-1270 configuration with DRO ES-12 H + pneumatic clamping is the complete accessory version of the basic UWF 90-1270: same mechanical characteristics (table, spindles, travels, motors) but with productive accessories included in the standard supply instead of being purchasable separately. The additional cost compared to the basic UWF 90-1270 is justified for workshops with regular production: the DRO ES-12 H and pneumatic clamping are rarely replaced after installation, so including them in the standard supply reduces the total investment cost. For workshops with occasional use, the basic UWF 90-1270 without accessories is significantly more economical, and accessories can be purchased separately when needed.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to Southern Italy). With a weight of 1,300 kg, it requires a pallet jack or crane for unloading and handling. Dimensions 1,750 × 1,500 × 2,200 mm: check the workshop ceiling height in advance (the machine is 2,200 mm high). The machine is supplied with an integrated base. ISO 40 milling cutters, milling arbors, milling tools, spare parts for the pneumatic clamping system (seals, pneumatic cylinders), spare parts for the DRO (sensors, cables) original Bernardo are available from stock with 3-5 business day shipping. Customer support in Italian is available.\u003c\/p\u003e\n\n\u003ch3\u003eWho the UWF 90-1270 with pneumatic clamping is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eIndustrial machine weighing 1,300 kg requiring a 400V three-phase line. For hobby use, the KF 16 Vario is correctly sized.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshop with series production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eDRO ES-12 H + DIN 2080 pneumatic clamping included: crucial features for productivity in productions with frequent tool changes. Vertical spindle speed 1,750 rpm and horizontal 1,300 rpm for standard machining.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnical school \/ professional training laboratory\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eComplete configuration with all standard accessories for educational use: students learn the use of modern digital DRO and pneumatic clamping. Robustness for intensive use by multiple operators.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without a 400V industrial three-phase line; environments without space for 1,750 × 1,500 × 2,200 mm dimensions and 1,300 kg weight; occasional hobby use (oversized, consider KF 16 Vario or UWF 80 E); applications requiring CNC milling machines (UWF are manual milling machines with automatic feeds, not CNC); workshops without pneumatic power (the pneumatic clamping system requires a compressor with a minimum pressure of 6 bar).\u003c\/p\u003e\n\n\u003ch3\u003eMachining capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,270 × 280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable T-slots\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX \/ Y \/ Z travels\u003c\/td\u003e\n\u003ctd\u003e750* \/ 230 \/ 300 mm (*manual longitudinal travel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle-table distance\u003c\/td\u003e\n\u003ctd\u003e35 - 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle-column distance\u003c\/td\u003e\n\u003ctd\u003e170 - 750 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable tilt\u003c\/td\u003e\n\u003ctd\u003e-45° \/ +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles and speeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed\u003c\/td\u003e\n\u003ctd\u003e(8) 115 - 1,750 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(12) 40 - 1,300 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle stroke\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle feed\u003c\/td\u003e\n\u003ctd\u003e0.08 \/ 0.15 \/ 0.25 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e(8) 32 - 700 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-axis rapid traverse\u003c\/td\u003e\n\u003ctd\u003e660 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotors and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle motor power\u003c\/td\u003e\n\u003ctd\u003e0.85 \/ 1.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e400V three-phase \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIncluded accessories (complete configuration)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital display\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamping system\u003c\/td\u003e\n\u003ctd\u003ePneumatic DIN 2080 with M16 drawbar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork light\u003c\/td\u003e\n\u003ctd\u003eIntegrated LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling device\u003c\/td\u003e\n\u003ctd\u003eIntegrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,750 × 1,500 × 2,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1,300 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 90-1270 universal milling machine with complete configuration\u003c\/li\u003e\n\u003cli\u003e3-axis digital display ES-12 H with LCD display\u003c\/li\u003e\n\u003cli\u003eDIN 2080 pneumatic clamping system with M16 drawbar\u003c\/li\u003e\n\u003cli\u003eIntegrated LED lamp\u003c\/li\u003e\n\u003cli\u003eIntegrated cooling device\u003c\/li\u003e\n\u003cli\u003eAutomatic feeds on X and Y axes\u003c\/li\u003e\n\u003cli\u003eZ-axis positioning motor\u003c\/li\u003e\n\u003cli\u003eISO 40 \/ B18 and ISO 40 \/ MT 3 adapters\u003c\/li\u003e\n\u003cli\u003eMorse taper sleeve MT 3 \/ 2\u003c\/li\u003e\n\u003cli\u003eLong milling arbor 27 mm\u003c\/li\u003e\n\u003cli\u003eHorizontal counter-support\u003c\/li\u003e\n\u003cli\u003eAdjustable guard and horizontal milling cover\u003c\/li\u003e\n\u003cli\u003eSet of service tools\u003c\/li\u003e\n\u003cli\u003eUser manual in Italian\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the difference between the basic UWF 90-1270 and this version with pneumatic clamping?\u003c\/summary\u003e\n\u003cp\u003eSame mechanical characteristics (table, spindles, travels, motors, weight) but with productive accessories included: the 3-axis DRO ES-12 H replaces manual vernier readings, the DIN 2080 pneumatic clamping system replaces manual key clamping, reducing tool change times from 30-60 seconds to 5-10 seconds.\u003c\/p\u003e\n\u003cp\u003eFor workshops with regular production of small series (over 50 tool changes per day), the additional cost of the complete configuration pays for itself in 6-12 months of use. For workshops with occasional use or infrequent tool changes (under 10 per day), the basic UWF 90-1270 without accessories is more economical, and accessories can be purchased separately only when needed.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eDoes the pneumatic clamping system require a compressor?\u003c\/summary\u003e\n\u003cp\u003eYes. The DIN 2080 pneumatic clamping system requires compressed air with a minimum pressure of 6 bar and adequate flow to activate the drawbar clamping cylinder. For workshops without an existing compressor, a separate industrial compressor must be purchased (typical cost €800-€3,000 for suitable models).\u003c\/p\u003e\n\u003cp\u003eThe workshop's network pressure must be stable during clamping operation: pressure drops (caused by simultaneous use of other pneumatic tools) can compromise the drawbar's grip, risking tool damage and injury. For workshops with intensive pneumatic use (painting, sandblasting, screwdrivers), a dedicated compressor for the milling machine or an additional accumulator tank is recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat exactly does the 3-axis DRO ES-12 H measure?\u003c\/summary\u003e\n\u003cp\u003eIt measures the absolute and relative positions of the X (longitudinal table travel), Y (transversal table travel), and Z (vertical spindle travel) axes with a resolution of 0.005 mm. It replaces manual vernier readings on graduated scales, reducing reading errors and setup times.\u003c\/p\u003e\n\u003cp\u003eStandard DRO functions: absolute vs. relative position (zeroing for workpiece reference), inches vs. mm, integrated calculator, storage of useful positions (typically 100-200 points), repositioning function after interruption. For complex productions with multiple drilling\/milling positions, the DRO reduces setup times by 2-3 times compared to working with manual scales. The 0.005 mm resolution is sufficient for most standard mechanical machining; for higher precision machining (below 0.01 mm), a grinding machine or a CNC milling machine is required.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the machine a CNC milling machine?\u003c\/summary\u003e\n\u003cp\u003eNo. The UWF 90-1270 is a manual milling machine with automatic feeds on the X and Y axes and a positioning motor on the Z-axis. The DRO ES-12 H is a measuring tool, not a numerical control: the operator manually performs movements following a machining cycle.\u003c\/p\u003e\n\u003cp\u003eFor CNC milling (automatic execution of G-code programs), dedicated milling machines with numerical control (Siemens, Fanuc, Heidenhain) are required, and their cost is significantly higher (typically €50,000-€200,000 for industrial models). The UWF 90-1270 with DRO offers an intermediate level: the DRO accelerates manual machining, but the operator must be present. For workshops with production of unique parts or small series with complex cycles, this level is correctly sized; for high volume production, a CNC milling machine is the correct choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan the vertical and horizontal spindles be used simultaneously?\u003c\/summary\u003e\n\u003cp\u003eNo. The spindles are alternative: the operator configures the machine for vertical machining (tool in vertical spindle, horizontal spindle stopped) or horizontal machining (tool in horizontal spindle, vertical spindle stopped). Changing the configuration typically takes 5-15 minutes.\u003c\/p\u003e\n\u003cp\u003eThe use of the horizontal spindle is typical for long grooves (on the surface of large workpieces) and for profile machining that requires disc cutters. The horizontal spindle speed is lower (1,300 vs. 1,750 rpm) but the torque is higher: correctly sized for large diameter disc cutters that require high torque. For workshops specializing in standard vertical milling, the horizontal spindle is rarely used; for workshops with a variety of machining operations, the availability of both is an essential feature.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694433177928,"sku":"02-1228XL0","price":16599.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresatrice_universale_Bernardo_UWF_90-1270_con_3_assi_digitali_e_serraggio_pneumatico.png?v=1758034680"},{"product_id":"bernardo-fresatrici-uwf-90-1270","title":"Bernardo UWF 90-1270 Universal Milling Machine – ISO 40, dual spindle, 1,270×280 mm table, 0.85\/1.5 kW vertical motor, 3-axis DRO","description":"\u003cp\u003eThe Bernardo UWF 90-1270 universal milling machine offers ISO 40 vertical and horizontal spindles, 8-stage vertical speeds of 115-1,750 rpm and 12-stage horizontal speeds of 40-1,300 rpm, a 1,270×280 mm table with 14 mm T-slots, a swiveling head (-90°\/+90°), a tilting table (±45°), travels of 750\/230\/300 mm (manual X), automatic X and Y feeds with rapid traverse, a Z-axis positioning motor (rapid 660 mm\/min), vertical motor 0.85\/1.5 kW + horizontal motor 2.2 kW, and a heavy cast iron structure with adjustable dovetail guides. ES-12 H 3-axis DRO included. Weight 1,300 kg. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindles:\u003c\/strong\u003e Vertical and horizontal ISO 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical speeds:\u003c\/strong\u003e 8 stages: 115 – 1,750 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal speeds:\u003c\/strong\u003e 12 stages: 40 – 1,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,270 × 280 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravels (X \/ Y \/ Z):\u003c\/strong\u003e 750 (man.) \/ 230 \/ 300 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 0.85\/1.5 kW vertical + 2.2 kW horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-axis DRO:\u003c\/strong\u003e ES-12 H included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 90-1270 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 90-1270 is the entry-level to mid-range universal milling machine in the UWF family with a 1,270 mm table, sized for workshops with medium to large part production needs but with limited power on the vertical spindle. A distinctive feature compared to the UWF 90 V: 0.85\/1.5 kW vertical motor (vs 2.2 kW on the 90 V), sized for light to medium machining. The horizontal motor remains at 2.2 kW: typical horizontal milling (with large cutters) requires more power than vertical milling. The vertical spindle speeds of 115-1,750 rpm (vs 90-2,000 on the 90 V) are slightly different: the range is shifted downwards, suitable for less aggressive tools. All other mechanical characteristics are identical to the UWF 90 V: 1,270×280 mm table, 750\/230\/300 travels, dual spindle, DRO included, 1,300 kg heavy cast iron structure. In Krollit customers' workshops, it is chosen by general mechanical workshops with medium-large part production but limited power requirements, professional artisan workshops, and workshops that primarily work on standard materials without requiring high power on the vertical.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 90-1270 is the 'economical' version of the UWF family with a 1,270 mm table. Alongside it: UWF 90 V (2.2 kW vertical motor for more demanding machining); UWF 90-1270 with pneumatic clamping (Row 17 of the catalog, version with quick tool change). Difference between UWF 90-1270 vs UWF 90 V: the vertical motor is the key difference. For workshops with standard machining on mild steel, aluminum, brass, the UWF 90-1270 is correctly sized with a lower cost. For regular machining on harder steels or large tools that require significant power on the vertical, the UWF 90 V with 2.2 kW is correctly sized. For smaller parts with reduced vertical motor, consider the UWF 80 E (1,000×240 table, 0.85\/1.5 kW vertical motor). For larger parts, move up to the UWF 95 N (1,600×360 mm table, 2,200 kg weight) or UWF 150 (1,650×360 table, ISO 50).\u003c\/p\u003e\n\u003ch3\u003eLogistics and Krollit support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to Southern Italy). With 1,300 kg, it requires a crane or forklift of adequate capacity. Dimensions 1,750 × 1,500 × 2,200 mm. ISO 40 adapters, milling cutters, accessories, and original Bernardo spare parts available from stock with 3-5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the UWF 90-1270 for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eIndustrial machine weighing 1,300 kg and requiring 400V three-phase power. Exclusively for professional applications.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical workshop with light-medium machining\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eTable size 1,270×280 mm and travels 750\/230\/300 mm handle medium-large parts. Vertical motor 0.85\/1.5 kW sized for standard machining on mild steel and alloys.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional artisan workshop\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eComplete UWF features (dual spindle, DRO included, 1,300 kg structure) at a lower price compared to the UWF 90 V. Suitable for limited budgets without compromising on geometry.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e regular machining on hard steels or large tools that require power on the vertical (the UWF 90 V with a 2.2 kW motor is correctly sized); series production with frequent tool changes (the UWF 90-1270 with pneumatic clamping is faster); production of larger parts (UWF 95 N or UWF 150).\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,270 × 280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable T-slots\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable tilt\u003c\/td\u003e\n\u003ctd\u003e-45° to +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40 (vertical and horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed\u003c\/td\u003e\n\u003ctd\u003e(8) 115 – 1,750 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(12) 40 – 1,300 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle travel\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravels and capacities\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTravels (X \/ Y \/ Z)\u003c\/td\u003e\n\u003ctd\u003e750 (manual) \/ 230 \/ 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle to table distance\u003c\/td\u003e\n\u003ctd\u003e35 – 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle to column distance\u003c\/td\u003e\n\u003ctd\u003e170 – 750 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSwiveling head\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds\u003c\/td\u003e\n\u003ctd\u003e(8) 32 – 700 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRapid Z-axis feed\u003c\/td\u003e\n\u003ctd\u003e660 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-axis positioning motor\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical motor power\u003c\/td\u003e\n\u003ctd\u003e0.85 \/ 1.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDRO included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,750 × 1,500 × 2,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1,300 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 90-1270 universal milling machine\u003c\/li\u003e\n\u003cli\u003eES-12 H 3-axis digital readout with LCD display\u003c\/li\u003e\n\u003cli\u003eDrawbar M16\u003c\/li\u003e\n\u003cli\u003eIntegrated LED lamp\u003c\/li\u003e\n\u003cli\u003eCoolant device\u003c\/li\u003e\n\u003cli\u003eAutomatic feeds on X and Y axes\u003c\/li\u003e\n\u003cli\u003eZ-axis positioning motor\u003c\/li\u003e\n\u003cli\u003eISO 40\/B18, ISO 40\/MT 3 adapters\u003c\/li\u003e\n\u003cli\u003eMorse taper sleeve MT 3\/2\u003c\/li\u003e\n\u003cli\u003eLong 27 mm milling arbor\u003c\/li\u003e\n\u003cli\u003eHorizontal counter support\u003c\/li\u003e\n\u003cli\u003eAdjustable protective device\u003c\/li\u003e\n\u003cli\u003eCover for horizontal milling\u003c\/li\u003e\n\u003cli\u003eService tool kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the key difference from the UWF 90 V?\u003c\/summary\u003e\n\u003cp\u003eOnly the vertical motor: UWF 90-1270 has 0.85\/1.5 kW, UWF 90 V has 2.2 kW. Same table (1,270×280 mm), same travels, same horizontal motor (2.2 kW), same DRO included.\u003c\/p\u003e\n\u003cp\u003eFor workshops with standard machining on medium materials (mild steels, aluminum, brass), the 0.85\/1.5 kW motor is sufficient. For regular machining on harder steels (S355, hardened steels) or for large tools (over Ø 50 mm), the UWF 90 V with 2.2 kW is correctly sized. The price difference reflects the motor difference.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat does the dual power 0.85\/1.5 kW mean?\u003c\/summary\u003e\n\u003cp\u003eIt is a dual-speed motor: at low speeds (delta connection) it delivers 0.85 kW; at high speeds (star connection) it delivers 1.5 kW. A constructive feature of 2-speed asynchronous motors.\u003c\/p\u003e\n\u003cp\u003e2-speed motors are a simple and reliable solution to provide more power at high speeds (where needed) and less power at low speeds (where natural torque is already sufficient). The switching between the 2 powers is automatic in the spindle speed range change.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I machine hardened steel?\u003c\/summary\u003e\n\u003cp\u003eFor hardened steel, light machining yes, heavy machining no. The 1.5 kW vertical motor at most handles cutters up to Ø 16-20 mm on hardened steels with small material removal.\u003c\/p\u003e\n\u003cp\u003eFor regular machining on hardened steels with medium-large tools, the UWF 90 V with a 2.2 kW motor is recommended, or, for series production on hard steels, the UWF 95 N (2.2 kW vertical motor + 2,200 kg structure for superior stability). The UWF 90-1270 is optimized for standard general workshop machining.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre vertical speeds of 115-1,750 rpm limiting?\u003c\/summary\u003e\n\u003cp\u003eFor most standard machining, no. For milling aluminum or light alloys with small tools (Ø under 8 mm), speeds higher than 1,750 rpm may be needed: in that case, the UWF 90 V (90-2,000) or the UWF 80 E Vario with inverter are more suitable.\u003c\/p\u003e\n\u003cp\u003eOptimal cutting speed depends on the tool and material. For standard steels with Ø 10-30 mm cutters, typical speeds are 200-1,500 rpm, well covered by the UWF 90-1270 range. For finishing on aluminum with small cutters, speeds can go up to 3,000-5,000 rpm: in that case, consider the UWF 80 E Vario with inverter.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the Z-positioning motor also included in this version?\u003c\/summary\u003e\n\u003cp\u003eYes. The Z-positioning motor is a standard feature of the entire UWF 90-1270 and UWF 90 V family. Rapid feed 660 mm\/min on the Z-axis regardless of the vertical machining motor.\u003c\/p\u003e\n\u003cp\u003eThe Z-positioning motor is separate from the vertical machining motor: it is used exclusively for rapid head movements between machining operations. It is an ergonomic element that reduces operator fatigue. On entry-level milling machines from other brands, it is often absent or available as an optional accessory.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694442910024,"sku":"02-1227XL0","price":14884.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Fresatrice_universale_UWF_90-1270_con_DRO_3_assi.png?v=1758033393"},{"product_id":"bernardo-fresatrici-uwf-90v","title":"Bernardo UWF 90 V Universal Milling Machine with pneumatic clamping DIN 2080 – ISO 40, double spindle, table 1,270×280 mm, 3-axis DRO","description":"\u003cp\u003eThe Bernardo UWF 90 V universal milling machine with pneumatic clamping offers ISO 40 vertical and horizontal spindles, 8 vertical speed stages 90-2,000 rpm and 12 horizontal speed stages 40-1,300 rpm, a DIN 2080 pneumatic tool clamping system for quick changes, a 1,270×280 mm table inclinable ±45° with 14 mm T-slots, a swiveling head -90°\/+90°, travels of 750 (manual)\/230\/300 mm, automatic X and Y feeds with a Z positioning motor (rapid 660 mm\/min), automatic spindle feed (0.08\/0.15\/0.25 mm\/rev), 2.2 kW vertical + 2.2 kW horizontal motors, and a grey cast iron structure. ES-12 H 3-axis DRO included. Weight 1,310 kg. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindles:\u003c\/strong\u003e Vertical and horizontal ISO 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool clamping:\u003c\/strong\u003e Pneumatic DIN 2080 for quick change\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical speed:\u003c\/strong\u003e 8 stages: 90 – 2,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal speed:\u003c\/strong\u003e 12 stages: 40 – 1,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,270 × 280 mm inclinable ±45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 2.2 kW vertical + 2.2 kW horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-axis DRO:\u003c\/strong\u003e ES-12 H included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 90 V with DIN 2080 pneumatic clamping and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 90 V with pneumatic clamping is the superior professional version of the basic UWF 90 V, distinguishable by the included DIN 2080 pneumatic tool clamping system. Key feature: pneumatic clamping allows tool change in 5-10 seconds (vs 30-60 seconds for standard manual clamping). For workshops with series production or operations requiring frequent tool changes, the time saving is significant: a typical operation with 5-10 tool changes can reduce downtime by 5-10 minutes per piece. The basic mechanical characteristics are identical to the UWF 90 V (1,270×280 mm table, double ISO 40 spindle, 2.2+2.2 kW motors, DRO included): the difference is exclusively in the tool clamping system. DIN 2080 is the international standard for ISO 40 pneumatic clamping: compatible commercial tools are widely available. Among Krollit's customer workshops, it is chosen by mechanical workshops with series production, CNC laboratories using manual milling machines for quick setups, and professional workshops that value operational efficiency.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 90 V with pneumatic clamping is the quick tool change version of the basic UWF 90 V. Key difference: same mechanical machine, but DIN 2080 pneumatic clamping (vs traditional manual clamping). For workshops with standard production and low tool change frequency, the basic UWF 90 V is sufficient at a lower cost. For workshops that frequently change tools (multi-step on a single piece, series production, mixed operations), the pneumatic clamping version repays the difference with saved downtime. The same pneumatic clamping system is available on the UWF 90-1270 (version with less powerful vertical motor) and on the UWF 95 N (top mid-range). For growing workshops, the pneumatic version is strategically preferable: the higher initial investment quickly pays for itself with intensive use. For a contained immediate investment, the manual version is adequate.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). At 1,310 kg, it requires a crane or forklift of adequate capacity. Dimensions 1,750 × 1,500 × 2,200 mm. Compressed air supply is necessary for the pneumatic clamping system. ISO 40 DIN 2080 adapters, cutters, and original Bernardo spare parts are available from stock with 3-5 working days shipping. Customer support in Italian is available.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the UWF 90 V with DIN 2080 pneumatic clamping for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot indicated\u003c\/td\u003e\n\u003ctd\u003eProfessional industrial machine with pneumatic system. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorkshop with series production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eDIN 2080 pneumatic clamping reduces tool change times by 4-6x. For multi-step operations on serial parts, the saving is significant.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorkshop with mixed operations \/ frequent tool changes\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor operations requiring multiple milling steps on a single piece (roughing, finishing, boring, drilling), quick tool change is a decisive feature.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot indicated for:\u003c\/strong\u003e workshops without compressed air supply (the pneumatic system is mandatory); workshops with standard production and low tool turnover (the basic UWF 90 V is correctly sized at a lower cost); operations that require only low power (the UWF 90-1270 with a less powerful motor is more economical).\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,270 × 280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable T-slots\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable tilt\u003c\/td\u003e\n\u003ctd\u003e-45° \/ +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40 (vertical and horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool clamping\u003c\/td\u003e\n\u003ctd\u003ePneumatic DIN 2080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed\u003c\/td\u003e\n\u003ctd\u003e(8) 90 – 2,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(12) 40 – 1,300 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle stroke\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle feed\u003c\/td\u003e\n\u003ctd\u003e0.08 \/ 0.15 \/ 0.25 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravels and capacities\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal travel (x)\u003c\/td\u003e\n\u003ctd\u003e750 mm (manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross travel (y)\u003c\/td\u003e\n\u003ctd\u003e230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical travel (z)\u003c\/td\u003e\n\u003ctd\u003e300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e240 – 740 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – table distance\u003c\/td\u003e\n\u003ctd\u003e125 – 425 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSwiveling head\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle head tilt\u003c\/td\u003e\n\u003ctd\u003e-90° \/ +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds (x)\u003c\/td\u003e\n\u003ctd\u003e(8) 32 – 700 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-axis rapid feed\u003c\/td\u003e\n\u003ctd\u003e660 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ positioning motor\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical power supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePneumatic power supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDRO included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis with LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,750 × 1,500 × 2,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1,310 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 90 V universal milling machine with pneumatic clamping\u003c\/li\u003e\n\u003cli\u003eES-12 H 3-axis digital display with LCD screen\u003c\/li\u003e\n\u003cli\u003ePneumatic tool clamping system (DIN 2080)\u003c\/li\u003e\n\u003cli\u003eDrawbar M16\u003c\/li\u003e\n\u003cli\u003eHorizontal counter support\u003c\/li\u003e\n\u003cli\u003eISO 40\/B18, ISO 40\/MT 3 adapters\u003c\/li\u003e\n\u003cli\u003eMorse Taper sleeve MT 3 \/ 2\u003c\/li\u003e\n\u003cli\u003eLong milling arbors ISO 40\/27 mm and ISO 40\/32 mm\u003c\/li\u003e\n\u003cli\u003eCoolant device\u003c\/li\u003e\n\u003cli\u003eHorizontal milling cover\u003c\/li\u003e\n\u003cli\u003eAdjustable protective device\u003c\/li\u003e\n\u003cli\u003eLED lamp\u003c\/li\u003e\n\u003cli\u003eService tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat does 'DIN 2080' mean?\u003c\/summary\u003e\n\u003cp\u003eDIN 2080 is the German standard that defines the characteristics of the ISO 40 taper for pneumatic\/hydraulic clamping. It defines drawbar dimensions, taper geometry, and clamping system.\u003c\/p\u003e\n\u003cp\u003eDIN 2080 is the most common standard for manual milling machines with quick clamping. Tools to this standard are widely available from industrial suppliers. Not to be confused with DIN 69871 (standard for CNC with a different drawbar). For workshops with existing tools, it is important to check the standard before purchasing.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs compressed air needed continuously or only for tool changes?\u003c\/summary\u003e\n\u003cp\u003eOnly for tool changes (a few seconds). Between changes, air is not necessary. The tool clamping is mechanical (spring-loaded), air is only used to release the taper and insert a new one.\u003c\/p\u003e\n\u003cp\u003eFor workshops with an existing compressor, integration is simple: 6-8 bar pressure and a standard connection are sufficient. For workshops without compressed air, a compressor needs to be installed (even a small 50-liter one is sufficient for intermittent use). Air consumption is limited: each tool change uses approximately 5-10 liters of air at 6 bar.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow much time is really saved with pneumatic clamping?\u003c\/summary\u003e\n\u003cp\u003eFor each tool change: 5-10 seconds vs 30-60 seconds for manual clamping. For an operation with 5 tool changes: 2-4 minutes saved per piece.\u003c\/p\u003e\n\u003cp\u003eFor series production, the calculation multiplies by the number of pieces. Example: 50 pieces per day × 3 minutes saved = 150 minutes = 2.5 hours per day. For a workshop with one operator, the increase in productivity is significant. For occasional use, the saving is marginal, and the manual version is sufficient.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I use standard manual tools on the UWF 90 V with pneumatic clamping?\u003c\/summary\u003e\n\u003cp\u003eNo. The pneumatic system requires a specific DIN 2080 drawbar, different from the standard M16 drawbar of manual milling machines. Tools with a DIN 2080 drawbar are needed.\u003c\/p\u003e\n\u003cp\u003eFor workshops migrating from a manual milling machine to a pneumatic version, it is necessary to replace or upgrade the tool park. Adapters are available but reduce some of the benefits of quick change. For optimal investment, it is recommended to plan the purchase of DIN 2080 tools concurrently with the machine.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eDoes the price difference really pay off?\u003c\/summary\u003e\n\u003cp\u003eFor workshops with regular production, yes, typically in 6-18 months. For occasional use, the calculation does not add up: the manual version is sufficient.\u003c\/p\u003e\n\u003cp\u003eThe return on investment calculation depends on the frequency of tool changes and the value of operator time. For workshops with series production and specialized operators, the return is quick. For artisan workshops with single-piece production and occasional tool changes, the manual version offers a better investment-use ratio.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694454051144,"sku":"02-1231XL","price":17148.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Fresatrice_universale_UWF_90_V_con_DRO_3_assi_e_serraggio_pneumatico.jpg?v=1758032087"},{"product_id":"bernardo-fresatrici-uwf-95n","title":"Bernardo UWF 95 N Universal Milling Machine – ISO 40, pneumatic clamping DIN 2080, table 1,600×360 mm, motors 2.2+2.2 kW, 3-axis DRO, weight 2,200 kg","description":"\u003cp\u003eThe Bernardo UWF 95 N universal milling machine offers ISO 40 vertical and horizontal spindles with pneumatic clamping DIN 2080, vertical speeds of 8 stages 90-2,000 rpm and horizontal speeds of 12 stages 40-1,300 rpm, a 1,600×360 mm table with 14 mm T-slots, travels of 1,300\/300\/400 mm, automatic feeds on all axes (8 stages), rapid feeds of 1,290\/1,208\/513 mm\/min (X\/Y\/Z), spindle feed of 0.08\/0.15\/0.25 mm\/rev, a ±90° swiveling head, a ±45° tilting table, 2.2 kW vertical + 2.2 kW horizontal motors, and a heavy 2,200 kg cast iron structure with rectangular guides. ES-12 H 3-axis DRO included. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindles:\u003c\/strong\u003e Vertical and horizontal ISO 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool clamping:\u003c\/strong\u003e Pneumatic DIN 2080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable:\u003c\/strong\u003e 1,600 × 360 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravels (X \/ Y \/ Z):\u003c\/strong\u003e 1,300 \/ 300 \/ 400 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic feeds:\u003c\/strong\u003e On all 3 axes (8 stages)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 2.2 kW vertical + 2.2 kW horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2,200 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the UWF 95 N and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo UWF 95 N is the high-end universal milling machine in the UWF family, sized for professional workshops with production on large workpieces and intensive cycles. A dimensional leap compared to the UWF 90 V: 1,600×360 mm table (vs 1,270×280), 1,300 mm X-travel (vs 750), 2,200 kg weight (vs 1,310 kg). Distinctive professional features: DIN 2080 pneumatic clamping included (quick tool change), automatic feeds on ALL axes (X, Y, and Z, vs only X and Y on UWF 90 models), rectangular guides (vs dovetail guides on lower models). Rectangular guides have a larger contact surface: they provide superior rigidity and precision under load, a crucial feature for precision machining on large and heavy workpieces. Rapid feeds of 1,290\/1,208\/513 mm\/min (X\/Y\/Z) are significantly faster than lower UWF models: they reduce downtime between operations. In Krollit customer workshops, it is chosen by industrial mechanical workshops with regular production on large parts, metal fabrication shops with mechanical processing, and laboratories requiring precision production on voluminous parts.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe UWF 95 N is the top of Bernardo's mid-range UWF. Below it: UWF 90 V and UWF 90-1270 (1,270×280 table, 1,310 kg weight). Above it: UWF 110 (360° universal head, exclusive feature, but smaller table 1,120×260 mm); UWF 150 (absolute top of the range: ISO 50, 4 kW motors, 1,650×360 mm table, 2,250 kg weight). Difference between UWF 95 N vs UWF 110: the 95 N has a larger table (1,600×360 vs 1,120×260) and a classic vertical+horizontal double spindle; the UWF 110 has a smaller table but a 360° universal head (single spindle with full orientation). For production on standard large workpieces, the UWF 95 N is correctly sized; for machining with complex angles on medium workpieces, the UWF 110 is more flexible. Difference between UWF 95 N vs UWF 150: the 150 has ISO 50 taper (larger and more powerful tools), 4 kW motors (vs 2.2), similar weight (2,250 vs 2,200 kg). For heavy industrial workshops, the UWF 150 is top of the range; for standard professional workshops, the UWF 95 N covers the vast majority of needs.\u003c\/p\u003e\n\u003ch3\u003eLogistics and Krollit support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days for Southern Italy). At 2,200 kg, it requires an adequate capacity crane and properly dimensioned industrial flooring. Dimensions 2,300 × 1,960 × 2,400 mm: verify access to the workshop. Compressed air supply is required for the pneumatic clamping system. ISO 40 DIN 2080 adapters, milling cutters, accessories, and original Bernardo spare parts are available from stock with 3-5 business day shipping. Italian customer support available.\u003c\/p\u003e\n\n\u003ch3\u003eWho the UWF 95 N is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-end industrial machine weighing 2,200 kg. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial mechanical workshop with large parts\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e1,600×360 mm table and 1,300\/300\/400 mm travels handle parts that UWF 90 models cannot accommodate. Automatic feeds on all 3 axes and rectangular guides for precision production.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal fabrication shop with mechanical processing\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor production on mechanical components in fabrication. Pneumatic clamping DIN 2080 and rapid feeds (1,290\/1,208\/513 mm\/min) optimize serial production cycles.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops with parts within 750 mm in X (UWF 90 V or 90-1270 are correctly sized with significantly lower cost); heavy industrial production requiring ISO 50 (UWF 150 is top of the range); applications requiring a 360° universal head (UWF 110 is correctly sized); workshops without industrial flooring or without industrial 400V three-phase power.\u003c\/p\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e1,600 × 360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable T-slots\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable tilt\u003c\/td\u003e\n\u003ctd\u003e-45° to +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindles\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle taper\u003c\/td\u003e\n\u003ctd\u003eISO 40 (vertical and horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool clamping\u003c\/td\u003e\n\u003ctd\u003ePneumatic DIN 2080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle speed\u003c\/td\u003e\n\u003ctd\u003e(8) 90 – 2,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal spindle speed\u003c\/td\u003e\n\u003ctd\u003e(12) 40 – 1,300 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle travel\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle feed\u003c\/td\u003e\n\u003ctd\u003e0.08 \/ 0.15 \/ 0.25 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTravels and capacities\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal travel (X)\u003c\/td\u003e\n\u003ctd\u003e1,300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross travel (Y)\u003c\/td\u003e\n\u003ctd\u003e300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical travel (Z)\u003c\/td\u003e\n\u003ctd\u003e400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e150 – 770 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – table distance\u003c\/td\u003e\n\u003ctd\u003e120 – 520 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSwiveling head\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003e-90° to +90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal feeds (X)\u003c\/td\u003e\n\u003ctd\u003e(8) 22 – 420 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross feeds (Y)\u003c\/td\u003e\n\u003ctd\u003e(8) 22 – 393 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical feeds (Z)\u003c\/td\u003e\n\u003ctd\u003e(8) 6 – 112 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRapid feeds (X\/Y\/Z)\u003c\/td\u003e\n\u003ctd\u003e1,290 \/ 1,208 \/ 513 mm\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorizontal motor power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePneumatic supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDRO included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eES-12 H 3-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConstruction features\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuides\u003c\/td\u003e\n\u003ctd\u003eRectangular (on all axes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStructure\u003c\/td\u003e\n\u003ctd\u003eHeavy gray cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e2,300 × 1,960 × 2,400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2,200 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo UWF 95 N universal milling machine\u003c\/li\u003e\n\u003cli\u003eES-12 H 3-axis digital display\u003c\/li\u003e\n\u003cli\u003eDrawbar M16\u003c\/li\u003e\n\u003cli\u003ePneumatic tool clamping system (DIN 2080)\u003c\/li\u003e\n\u003cli\u003eHorizontal counter support\u003c\/li\u003e\n\u003cli\u003eLong milling arbor ISO 40\/27 mm and ISO 40\/40 mm\u003c\/li\u003e\n\u003cli\u003eAdapters ISO 40\/MT 4, ISO 40\/MT 3, ISO 40\/MT 2\u003c\/li\u003e\n\u003cli\u003eCoolant device\u003c\/li\u003e\n\u003cli\u003eAdjustable guard\u003c\/li\u003e\n\u003cli\u003eHorizontal milling cover\u003c\/li\u003e\n\u003cli\u003eLED lamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat do 'rectangular guides' mean compared to 'dovetail guides'?\u003c\/summary\u003e\n\u003cp\u003eRectangular guides have a square-rectangular cross-section with larger and more rigid contact surfaces compared to dovetail guides (trapezoidal cross-section). For large and heavy workpieces, the rigidity of rectangular guides is crucial for precision.\u003c\/p\u003e\n\u003cp\u003eDovetail guides are an economical traditional solution suitable for entry- to mid-range milling machines. Rectangular guides are a construction feature of high-end industrial milling machines. Under load, rectangular guides maintain alignment better than dovetail guides: this characteristic becomes critical with large tables and heavy workpieces.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre automatic Z-axis feeds really necessary?\u003c\/summary\u003e\n\u003cp\u003eFor precision production on operations requiring Z-axis milling (e.g., facing on vertical surfaces), yes. Without automatic Z-axis feed, the operator must manually manage the feed, reducing quality and repeatability.\u003c\/p\u003e\n\u003cp\u003eOn UWF 90 V and 90-1270 models, automatic feed is limited to X and Y. The UWF 95 N also includes automatic feed on Z (8 stages 6-112 mm\/min). For large workpiece machining requiring milling in multiple directions, automatic Z-axis feed is an essential feature for precision production.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat type of parts does the 1,300 mm X-travel cover?\u003c\/summary\u003e\n\u003cp\u003eMedium-large industrial parts: long profiles, molds, machine bases, machine components. The 1,300 mm travel allows complete machining on parts that would require multiple repositionings on smaller milling machines.\u003c\/p\u003e\n\u003cp\u003eTypical examples: die-casting molds 800-1,200 mm, industrial machine bases, machinery profiles. The 1,600×360 mm table with 1,300 mm X-travel handles parts without the need for repositioning, maintaining constant precision. For larger parts, consider the UWF 150 (1,350 mm X-travel with a 1,650×360 mm table).\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the maximum table load capacity?\u003c\/summary\u003e\n\u003cp\u003eThe 1,600×360 mm table with 14 mm T-slots handles standard heavy parts up to approximately 800-1,200 kg for precision machining, depending on clamping and workpiece geometry.\u003c\/p\u003e\n\u003cp\u003eThe maximum load capacity depends on the rigidity of the clamping (14 mm T-slots are dimensioned for industrial clamping) and the weight distribution on the table. For irregularly shaped parts or off-center clamping, the effective capacity decreases. The UWF 95 N's overall 2,200 kg structure is dimensioned for heavy industrial parts.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow much do the 2.2 + 2.2 kW motors consume in production?\u003c\/summary\u003e\n\u003cp\u003eOnly one spindle operates at a time. The active motor (vertical or horizontal) typically consumes 2.2-2.5 kWh per actual hour at full load. In production with a 50-60% duty cycle, the average consumption is 1.2-1.5 kWh per hour.\u003c\/p\u003e\n\u003cp\u003eFor workshops with significant electricity costs, the overall electrical investment is manageable by standard industrial meters. The Z-axis positioning motor (separate) has negligible consumption. The coolant pump and LED lamp have marginal consumption.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694466175304,"sku":"02-1246XL","price":24920.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Fresatrice_universale_UWF_95_N_con_DRO_3_assi_e_serraggio_pneumatico.jpg?v=1758030541"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/collections\/fresatrici-universali.png?v=1753778055","url":"https:\/\/www.krollit.com\/collections\/milling-machines-universali.oembed","provider":"Krollit","version":"1.0","type":"link"}