{"title":"Spiral shaft planer and thicknesser","description":"\u003cstrong\u003eSpiral arbor planers and thicknessers\u003c\/strong\u003e are the pinnacle of innovation in woodworking. These machine tools combine the precision of planing with the versatility of thicknessing, thanks to the innovative spiral arbor. They are ideal for craftsmen and woodworkers who seek the highest quality and precision in their production. Discover how these revolutionary planers can improve your woodworking.","products":[{"product_id":"pialla-a-filo-e-spessore-con-albero-a-spirale-ad-260-s-230v","title":"Bernardo AD 260 S - 230V Planer Thicknesser with Spiral Cutterblock","description":"\u003cp\u003eThe Bernardo AD 260 S – 230V planer-thicknesser offers a planing width of 250 mm, a jointer table of 1,090 mm, a spiral cutterblock Ø 75 mm with 24 TCT inserts at 4,000 rpm, a maximum thicknessing height of 185 mm, a feed rate of 4.8 m\/min, and a 2.0 kW single-phase 230V motor. Noise reduction up to 50% compared to HSS knives. Manufactured in Austria, distributed in Italy by Krollit as the official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 75 mm – 24 TCT inserts – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 185 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 4.8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.0 kW S1 \/ 2.8 kW S6 – 230V single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 173 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the AD 260 S – 230V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AD 260 S – 230V is the spiral cutterblock version of the AD 260 in a single-phase configuration: it combines the advantages of the TCT cutterblock, reduced noise, up to 20 times longer lifespan, and maintenance through single insert replacement, with the practicality of single-phase 230V power supply, which does not require a three-phase system. In Krollit customer workshops, it is primarily chosen by artisans and carpenters who work in environments where noise levels are a critical factor (shared workshops, residential areas, carpentry schools) or who want to almost completely eliminate knife sharpening from their maintenance routine.\u003c\/p\u003e\n\u003ch3\u003eSpiral cutterblock vs HSS knives: the practical difference\u003c\/h3\u003e\n\u003cp\u003eWith HSS knives, professional use requires sharpening every 1-4 weeks. With the TCT spiral cutterblock, each insert has 4 cutting edges: when one cutting edge wears out, the insert is rotated 90° to expose a fresh cutting edge, a 2-minute operation with an Allen key, without disassembling the cutterblock. Complete replacement of an insert only occurs when all 4 cutting edges are worn out, with a maintenance frequency 10-20 times lower than HSS knives. The 24 inserts always work in a staggered sequence, eliminating the harmonic vibrations that produce the characteristic noise of straight-knife planers.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to Southern Italy). Original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo AD 260 S – 230V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eSingle-phase 230V, 173 kg, reduced noise: suitable for home workshops with neighbours. Minimum maintenance thanks to reversible TCT inserts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ artisan (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor workshops without a three-phase system that want to eliminate sharpening from their routine. Reduced noise is a tangible advantage in 8 hours of daily work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eThe 2.0 kW single-phase motor is not sized for intensive industrial cycles. Consider the AD 260 S – 400V three-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops with an existing three-phase system (consider AD 260 S – 400V for higher motor torque); pieces over 250 mm wide; intensive production on hardwoods for more than 4 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eJointer (planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e835 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e24 pcs reversible (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e715 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknessing table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e4.8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.0 kW (2.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.8 kW (3.8 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230V – single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,150 × 800 × 1,000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 173 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, anti-kickback rollers, cutterblock guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 24 TCT inserts installed\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003ePush handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you replace a worn TCT insert?\u003c\/summary\u003e\n\u003cp\u003eReplacing a TCT insert requires an Allen key (included) and about 2 minutes per insert. There is no need to disassemble the cutterblock or send the machine for service. Procedure: switch off the machine, lock the cutterblock, unscrew the insert screw with the Allen key, rotate the insert 90° to expose the fresh cutting edge (or replace it if all 4 cutting edges are worn), screw it back in, and resume work. The 24 TCT inserts of the AD 260 S each have 4 usable cutting edges before replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the spiral cutterblock also work on resinous woods like pine?\u003c\/summary\u003e\n\u003cp\u003eYes, and with superior results to HSS knives. The geometry of the spiral TCT inserts produces a smoother surface on resinous woods due to the progressive cutting angle that reduces fiber tear-out. Resin tends to build up on the inserts more quickly than with hardwood: periodic cleaning with a specific solvent (every 2-3 weeks with intensive use) maintains optimal cutting performance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AD 260 S – 230V and ADM 260 S – 230V?\u003c\/summary\u003e\n\u003cp\u003eThe AD 260 S – 230V has a cutterblock with 24 TCT inserts and a 1,090 mm jointer table. The ADM 260 S – 230V has a spiral cutterblock with 24 HM inserts, a table with sound-absorbing lips, a prismatic guide, and a thicknessing table guided on a central column, superior construction features that make it more suitable for intensive professional use. The price difference reflects the higher construction level of the ADM.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should TCT inserts be replaced?\u003c\/summary\u003e\n\u003cp\u003eEach TCT insert has 4 cutting edges. In professional use on medium woods (4-6 hours\/day), a cutting edge rotation is necessary every 4-8 weeks per insert. Complete insert replacement occurs when all 4 cutting edges are worn out, every 4-8 months in professional use. Compared to HSS knives which require sharpening every 1-4 weeks, maintenance is drastically reduced.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,150 × 800 × 1,000 mm. For moving workpieces, a clear space of at least 1.8 m in front and behind is needed. At 173 kg, it can be moved with a manual pallet jack. Delivery is on a standard pallet.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692573364552,"sku":"08-1053","price":1781.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_AD_260_S_Pialla_filo_e_spessore_250_mm_con_albero_a_spirale_400_V.jpg?v=1757520445"},{"product_id":"bernardo-ad-260-s-400v","title":"Bernardo AD 260 S - 400V Planer Thicknesser with Spiral Cutterblock","description":"\u003cp\u003eThe Bernardo AD 260 S – 400V jointer and thicknesser offers a planing width of 250 mm, a jointer table of 1,090 mm, a spiral cutterblock Ø 75 mm with 24 TCT inserts at 4,000 rpm, a maximum thicknessing height of 185 mm, a feed rate of 4.8 m\/min, and a 2.0 kW three-phase 400V motor. Noise reduction up to 50%. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 75 mm – 24 TCT inserts – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 185 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknesser feed rate:\u003c\/strong\u003e 4.8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.0 kW S1 \/ 2.8 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 173 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the AD 260 S – 400V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AD 260 S – 400V is the spiral cutterblock version of the AD 260 in a three-phase configuration: for those who already have a three-phase system in their workshop and are willing to invest slightly more than the standard AD 260 HSS to eliminate knife sharpening from routine maintenance. The 2.0 kW three-phase motor offers a smoother starting torque than the single-phase version, with lower absorption peaks on the power line. In Krollit customers' workshops, it is chosen by joinery shops that work long shifts on mixed woods, where the versatility of TCT inserts on any type of wood, from softwoods to hardwoods, reduces machine downtime for maintenance.\u003c\/p\u003e\n\u003ch3\u003eAD 260 S – 400V vs AD 260 S – 230V: when to choose three-phase\u003c\/h3\u003e\n\u003cp\u003eThe two versions have identical technical specifications (same width, same cutterblock, same weight). The difference is exclusively in the power supply: the 400V three-phase offers more uniform motor torque under load and lower peak absorption, appreciable advantages in prolonged work cycles on hardwoods. For those with available three-phase power, the 400V is the natural choice; for those without three-phase power, the 230V is the corresponding version.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho the Bernardo AD 260 S – 400V is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eRequires a 400V three-phase system. For hobby use without three-phase, prefer the 230V version. The TCT cutterblock is also appreciated in occasional use due to almost no maintenance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor workshops with 400V three-phase that want to eliminate sharpening from their routine. On mixed woods, TCT offers consistent quality without adapting maintenance frequency to the type of wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eFor intensive cycles, consider the ADM 260 S – 400V with superior construction. The AD 260 S – 400V is suitable for shifts up to 6-7 hours on medium woods.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without a three-phase system (choose AD 260 S – 230V); pieces over 250 mm wide; intensive production on very hard woods over 7 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eJointer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e835 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e24 pcs reversible (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e715 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e4.8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.0 kW (2.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.8 kW (3.8 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,150 × 800 × 1,000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 173 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, anti-kickback rollers, cutterblock guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 24 TCT inserts installed\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003ePush stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhy choose the 400V version over the 230V?\u003c\/summary\u003e\n\u003cp\u003eWith an available three-phase system, the 400V version offers more uniform motor torque under load, fewer cutterblock speed fluctuations during passes on hardwoods, and lower peak absorption on the line. In practice: less interference with other users of the system during startup, more linear performance in intensive work. If three-phase is not available, the 230V version is the only viable option.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the 24 TCT inserts on the AD 260 S the same as on the AD 310 S?\u003c\/summary\u003e\n\u003cp\u003eNo. The AD 260 S uses a Ø 75 mm cutterblock with 24 TCT inserts; the AD 310 S uses a Ø 95 mm cutterblock with 52 TCT inserts. The inserts are not interchangeable between the two models. However, the geometry of the inserts is standardized: the TCT spare parts available from Krollit are compatible with the respective cutterblock of each model.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is the maintenance of TCT inserts managed?\u003c\/summary\u003e\n\u003cp\u003eEach insert has 4 cutting edges. When the surface quality noticeably declines, the insert is rotated 90° with an hex key: a 2-minute operation, no special tools, no need for sharpening. Complete replacement of the insert occurs when all 4 cutting edges are worn out. With 24 inserts on the cutterblock, they are rarely replaced all at once: maintenance is progressive, insert by insert, without ever stopping production for an entire day.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the AD 260 S work well on MDF and panels with glue?\u003c\/summary\u003e\n\u003cp\u003eYes, much better than HSS knives. The TCT carbide inserts resist the abrasive resins of MDF much longer than HSS high-speed steel. On MDF, the frequency of insert rotation may increase compared to solid wood, but it remains significantly lower than the frequency of HSS sharpening. For production mainly on MDF or particleboard, the version with a TCT spiral cutterblock is the correct choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,150 × 800 × 1,000 mm. For handling workpieces, at least 1.8 m of free space is needed in front and behind. At 173 kg, it can be moved with a manual pallet jack.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692574740808,"sku":"08-1054","price":1781.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_AD_260_S_Pialla_filo_e_spessore_250_mm_con_albero_a_spirale_400_V.jpg?v=1757520445"},{"product_id":"bernardo-ad-310s-spirale-400v","title":"Bernardo AD 310 S Planer Thicknesser – 400V with spiral cutter block","description":"\u003cp\u003eThe Bernardo AD 310 S – 400V planer-thicknesser offers a planing width of 310 mm, a jointer table of 1,610 mm, a spiral cutterblock Ø 95 mm with 52 TCT inserts at 4,300 rpm, a maximum thicknessing height of 225 mm, a feed rate of 6 m\/min, and a 3.0 kW three-phase 400V motor. It provides up to 50% noise reduction and a cutting edge life up to 20 times longer than HSS knives. Manufactured in Austria, distributed in Italy by Krollit as the official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 310 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 95 mm – 52 TCT inserts – 4,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 225 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 6 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3.0 kW S1 \/ 4.2 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 295 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the AD 310 S and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AD 310 S is the spiral cutterblock version of the AD 310: same structure, same motor, same weight, but with 52 TCT inserts instead of 4 HSS knives. The choice between AD 310 and AD 310 S depends almost exclusively on the frequency of maintenance desired: those who consider knife sharpening an acceptable routine choose the lower-cost AD 310; those who want to almost completely eliminate machine downtime for cutting edge maintenance choose the AD 310 S. In Krollit customers' workshops, it is chosen by joineries with 6-8 hour shifts on mixed woods, where the time spent on traditional sharpening impacts productivity.\u003c\/p\u003e\n\u003ch3\u003e52 TCT inserts: why so many\u003c\/h3\u003e\n\u003cp\u003eThe Ø 95 mm cutterblock of the AD 310 S holds 52 inserts in a helical, staggered arrangement: each insert cuts only a small section of the workpiece per rotation, with a progressive entry angle that eliminates harmonic vibrations. The result is a surface with superior cutting fineness compared to straight knives, less tear-out on oblique grain, and a significantly lower noise level, measurable at 10-15 dB less than the HSS version. Each insert has 4 cutting edges: when one edge wears out, it is rotated by 90°.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo AD 310 S – 400V for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eHeavy professional machine (295 kg, three-phase). For hobby use, TCT is appreciated for minimal maintenance, but the cost is higher than the AD 310 HSS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eThe time saved on cutting edge maintenance recoups the additional investment compared to the AD 310 HSS in about 12-18 months of professional use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor 6-8 hour shifts, TCT virtually eliminates downtime for sharpening. For even more intensive production, consider the ADM 300 with a helical roller.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without a 400V three-phase system; those who primarily work with straight knives and prefer not to change technology; workpieces over 310 mm wide (consider AD 410 S).\u003c\/p\u003e\n\u003ch3\u003eJointer (surface planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,610 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e910 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e52 reversible pcs (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,300 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1,110 × 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 225 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknessing table length\u003c\/td\u003e\n\u003ctd\u003e750 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e6 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e4.2 kW (5.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction outlet\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,610 × 900 × 1,150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e295 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, cutterblock guard, anti-restart lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 52 mounted TCT inserts\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003eSafety push block\u003c\/li\u003e\n\u003cli\u003eSetting gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AD 310 and AD 310 S?\u003c\/summary\u003e\n\u003cp\u003eThe AD 310 mounts 4 HSS knives on the Ø 95 mm cutterblock. The AD 310 S mounts 52 TCT inserts on the same cutterblock. Structure, motor, dimensions, and weight are identical. TCT offers: approx. 50% noise reduction, 10-20 times longer cutting edge life, maintenance by rotation\/individual replacement without disassembling the cutterblock. The cost of the AD 310 S is higher; the time saved in maintenance recoups it in 12-18 months of full-shift professional use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWith 52 inserts, is replacement complicated?\u003c\/summary\u003e\n\u003cp\u003eNo. The inserts are not replaced all at once. In normal use, 1-3 inserts are dealt with at a time, those in the most stressed positions. The procedure is identical regardless of the number of inserts: hex key, 2 minutes per insert, no cutterblock disassembly. The 52 inserts mean more cutting points distributed on the cutterblock, higher surface quality, not greater maintenance complexity.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the AD 310 S work on all wood types?\u003c\/summary\u003e\n\u003cp\u003eYes, with superior results to the HSS version on almost all woods. Particularly appreciated on: hard woods with difficult grain (oak, ash, walnut) where the helical cut reduces tear-out; resinous woods (pine, larch) where resin accumulates less on TCT inserts than on HSS knives; MDF and panels with glues where TCT lasts 10-20 times longer than HSS. On very exotic and siliceous woods, TCT insert wear is faster than usual but remains manageable.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat dust extractor is needed for the AD 310 S?\u003c\/summary\u003e\n\u003cp\u003eThe dust extraction outlet is Ø 100 mm. With a 310 mm width, a dust extractor with a minimum airflow of 600-800 m³\/h is needed. The spiral cutterblock produces chips of a different shape than straight knives, smaller and more homogeneous, which are easily extracted even with medium-capacity systems. Bernardo DC 300 and DC 600 are compatible.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,610 × 900 × 1,150 mm. For moving workpieces, clear space of at least 2.5 m in front and behind is needed. At 295 kg, adequate means for unloading are required: check access (minimum door width 1.2 m).\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692575723848,"sku":"08-1066","price":3391.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_AD_310_S_con_albero_a_spirale_e_inserti_TCT.jpg?v=1760689970"},{"product_id":"pialla-a-filo-e-spessore-con-albero-a-spirale-ad-410-s-400-v","title":"Planer and Thicknesser Bernardo AD 410 S – 400V with spiral cutterblock","description":"\u003cp\u003eThe Bernardo AD 410 S – 400V jointer and thicknesser offers a planing width of 410 mm, a jointer table of 1,685 mm, a spiral cutterblock Ø 95 mm with 72 TCT inserts at 4,300 rpm, a maximum thicknessing height of 220 mm, a feed rate of 6 m\/min, and a 3.0 kW three-phase 400V motor. Noise reduction up to 50%, cutting edge life up to 20 times longer than HSS knives. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 410 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 95 mm – 72 TCT inserts – 4,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 4 – 220 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed:\u003c\/strong\u003e 6 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3.0 kW S1 \/ 4.2 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 340 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the AD 410 S and for what purpose?\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AD 410 S is the 410 mm combined planer with a TCT spiral cutterblock: the choice for woodworking shops that professionally process wide workpieces and want to eliminate machine downtime for sharpening. The 72 inserts on the Ø 95 mm cutterblock, the highest density in the AD range, offer superior surface quality compared to the HSS version on any wood type, with a measured noise level of approx. 10-15 dB lower. In Krollit customer workshops, it is predominantly used by window and door manufacturers and furniture makers who work on wide doors, panels, and beams in full shifts, where cutting edge maintenance time is a real cost to productivity.\u003c\/p\u003e\n\u003ch3\u003e72 inserts vs 52 inserts: when the AD 410 S vs the AD 310 S\u003c\/h3\u003e\n\u003cp\u003eThe difference is not only in width (410 vs 310 mm) but also in the density of inserts on the cutterblock: the AD 410 S has 72 TCT inserts compared to 52 on the AD 310 S. More inserts on a greater width mean a more even distribution of the cutting load, with less stress on each individual insert and consistent surface quality even on large workpieces. The choice between AD 310 S and AD 410 S depends exclusively on the maximum width of the workpieces being processed.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). Original Bernardo spare parts available from stock with shipping in 3-5 working days. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo AD 410 S – 400V for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eHeavy professional machine (340 kg, three-phase). Cost and dimensions oversized for occasional use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall woodworking shop \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor those who work with wide workpieces up to 410 mm and want to eliminate cutting edge maintenance from their routine. TCT is particularly advantageous for doors and panels where surface quality is critical.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eFor intensive production of wide workpieces, TCT is the correct choice. For extreme cycles over 8 hours\/day on hard woods, also consider the FS 410 PS with a more powerful motor.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops without a three-phase 400V system; workpieces with a width less than 310 mm (oversized); environments with access less than 1.3 m wide.\u003c\/p\u003e\n\u003ch3\u003eSurface planer (jointer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,685 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e920 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e72 reversible pieces (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,300 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning fence\u003c\/td\u003e\n\u003ctd\u003e1,110 × 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e4 – 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e750 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e6 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e4.2 kW (5.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,685 × 1,045 × 1,100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e340 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, planer cutterblock guard, anti-restart lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 72 TCT inserts mounted\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003eSafety push stick\u003c\/li\u003e\n\u003cli\u003eSetting gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AD 410 and AD 410 S?\u003c\/summary\u003e\n\u003cp\u003eThe AD 410 uses 4 HSS knives on the Ø 95 mm cutterblock. The AD 410 S uses 72 TCT inserts on the same cutterblock. Structure, motor, dimensions, and weight are identical. The advantage of TCT: noise reduced by approx. 50%, cutting edge life 10-20 times longer, maintenance by rotating the insert without disassembly. The cost of the AD 410 S is higher; the payback period is 12-18 months of professional full-shift use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre 72 TCT inserts difficult to manage?\u003c\/summary\u003e\n\u003cp\u003eNo. As with all Bernardo spiral cutterblocks, maintenance is done insert by insert, not all 72 simultaneously. In practice, 2-5 inserts are addressed at a time, those in the most stressed position or with the most worn cutting edge. The operation requires an hex key and 2 minutes per insert. The high number of inserts is an advantage for cutting quality, not a maintenance burden.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the AD 410 S suitable for knotted workpieces?\u003c\/summary\u003e\n\u003cp\u003eYes. The TCT spiral cutterblock handles wood with irregular knots better than HSS knives: the helical cutting angle reduces mechanical shock on the insert when passing over a knot, extending the life of the cutting edge. On knotty oak or chestnut with frequent knots, the AD 410 S produces a smoother surface than the HSS version and requires fewer subsequent sanding operations.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often are the inserts rotated in professional use?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (6-8 hours\/day) on medium woods, an insert rotation is necessary every 6-10 weeks per insert. With 72 inserts on the cutterblock and progressive rotation, maintenance is distributed over weeks: there is never a time when the machine has to be stopped for a complete replacement. TCT spare parts are available from Krollit stock with shipping in 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,685 × 1,045 × 1,100 mm. For a 410 mm working width, at least 2.5-3 m of clear space is needed in front and behind for handling larger workpieces. At 340 kg, delivery requires a equipped flatbed: check access (minimum door width 1.3 m, height 1.4 m with machine on pallet truck).\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692577100104,"sku":"08-1069","price":3965.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_AD_410_S_con_albero_a_spirale_e_inserti_TCT.jpg?v=1760689481"},{"product_id":"bernardo-fs-310-ps","title":"Bernardo FS 310 PS Planer and Thicknesser with Spiral Cutterblock","description":"\u003cp\u003eThe Bernardo FS 310 PS jointer-planer offers a planing width of 310 mm, a jointer table of 1,400 mm, a spiral cutterblock Ø 75 mm with 30 TCT inserts at 4,500 rpm, a maximum thicknessing height of 240 mm, a feed rate of 5.4 m\/min, a 3.0 kW three-phase 400V motor, and an included digital display. Weight 205 kg. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 310 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 75 mm – 30 TCT inserts – 4,500 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 5.4 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3.0 kW S1 \/ 4.2 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital display:\u003c\/strong\u003e included as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 205 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the FS 310 PS and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo FS 310 PS is the 310 mm combined planer from the FS family with a spiral cutterblock: positioned between the AD 310 S (295 kg, heavier structure) and lower-end spiral planers. At 205 kg, it is more manageable than the AD 310 S while offering the most generous thicknessing height in the 310 mm range: 240 mm compared to the AD 310 S's 225 mm. The 4,500 rpm cutterblock with 30 TCT inserts produces a high-frequency cut with superior finish quality. The standard digital display for the thicknessing table allows for setting and replicating thicknesses with millimeter precision. In Krollit customers' workshops, it is chosen by furniture makers and joiners who regularly work with tall pieces (up to 240 mm) and want TCT to reduce maintenance.\u003c\/p\u003e\n\u003ch3\u003eFS 310 PS vs AD 310 S: two 310 mm approaches with TCT\u003c\/h3\u003e\n\u003cp\u003eThe two machines offer the same width (310 mm) and TCT cutterblock, but with different features. The AD 310 S weighs 295 kg (more stable for heavy pieces), has 52 inserts on the Ø 95 mm cutterblock and a thicknessing height up to 225 mm. The FS 310 PS weighs 205 kg (more manageable), has 30 inserts on the Ø 75 mm cutterblock at 4,500 rpm (higher cutting frequency) and a thicknessing height up to 240 mm, the most generous parameter of the two. The choice depends on: very heavy pieces to work (AD 310 S with its mass is superior) or tall pieces up to 240 mm with operational lightness (FS 310 PS).\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho the Bernardo FS 310 PS – 400V is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eProfessional machine (205 kg, three-phase, digital display). Cost and features oriented towards continuous professional use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall carpentry \/ artisan (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e310 mm, 240 mm thicknessing height (maximum in its category), TCT cutterblock, digital display: the most complete combination at this width in a manageable format (205 kg).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor production of tall pieces up to 240 mm with the need to reproduce precise thicknesses (digital display) and minimal cutting edge maintenance (TCT).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops without a 400V three-phase system (also available in 230V version, check availability); pieces over 310 mm wide; those who do not require a thicknessing height over 225 mm (AD 310 S is sufficient and more stable).\u003c\/p\u003e\n\u003ch3\u003eJointer (surface planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e825 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e30 reversible pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,500 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1,120 × 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax removal\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e305 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 240 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax removal\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e5.4 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital display\u003c\/td\u003e\n\u003ctd\u003eIncluded as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e4.2 kW (5.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase (also available 230V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,400 × 900 × 980 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 205 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 30 TCT inserts installed\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003eDigital display for thicknesser table\u003c\/li\u003e\n\u003cli\u003ePush handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhy does the FS 310 PS have 30 inserts and the AD 310 S have 52?\u003c\/summary\u003e\n\u003cp\u003eThe cutterblock of the FS 310 PS is Ø 75 mm (smaller than the Ø 95 mm of the AD 310 S): fewer inserts can be physically mounted in a helical arrangement on a smaller diameter cutterblock. The FS 310 PS compensates with a higher cutterblock speed (4,500 vs 4,300 rpm): the number of cuts per advanced cm remains comparable between the two models. There is no universally superior model: the AD 310 S is superior for heavy pieces requiring structural mass; the FS 310 PS is superior for thicknessing height (240 mm) and manageability (205 vs 295 kg).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the digital display included as standard or optional?\u003c\/summary\u003e\n\u003cp\u003eThe digital display for thicknesser table adjustment is included as standard in the FS 310 PS, it is not an optional extra. It allows reading and setting the passage height with 0.1 mm precision and replicating previous settings without having to measure the workpiece. For joineries that produce series with repeated thicknesses (e.g., frames, calibrated battens), this feature significantly reduces setup times.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the maximum thicknessing width of the FS 310 PS?\u003c\/summary\u003e\n\u003cp\u003eThe useful thicknessing width is 305 mm (slightly less than the 310 mm of the jointer). The maximum thicknessing height is 240 mm, the highest among 310 mm planers in the Bernardo catalog. For pieces with heights between 225 and 240 mm, the FS 310 PS is the only option in the 310 mm range; the AD 310 S stops at 225 mm.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it also available in a single-phase 230V version?\u003c\/summary\u003e\n\u003cp\u003eThe FS 310 PS is available in both 400V three-phase and 230V single-phase versions. Contact Krollit to check the availability of the 230V version and the specifications of the single-phase version (motor power may differ slightly).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,400 × 900 × 980 mm. At 205 kg, it is significantly more manageable than the AD 310 S (295 kg): it can be moved with a manual pallet truck on a flat floor. For workpiece handling, a clear space of at least 2.5 m in front and behind is needed.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"230V","offer_id":51362463318344,"sku":"08-1043","price":2200.07,"currency_code":"EUR","in_stock":true},{"title":"400V","offer_id":51362463351112,"sku":"08-1044","price":2200.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_FS_310_PS_400V_con_albero_a_spirale.jpg?v=1777724814"},{"product_id":"bernardo-pt-310s-spirale-400v","title":"Bernardo PT 310 S Jointer and Thicknesser - 400V with Spiral Cutterblock","description":"\u003cp\u003eThe Bernardo PT 310 S – 400V jointer-planer offers a planing width of 310 mm, a 1,300 mm jointer table, a spiral cutterblock Ø 75 mm with 30 TCT inserts at 4,000 rpm, a maximum thicknessing height of 180 mm, a feed rate of 8 m\/min, and a 2.2 kW three-phase 400V motor. Noise reduction up to 50%, and cutting edge life up to 20 times longer than HSS knives. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 310 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 75 mm – 30 TCT inserts – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 180 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 kW S1 \/ 3.0 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 180 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the PT 310 S and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo PT 310 S is the version with a TCT spiral cutterblock of the PT 310: same compact structure (180 kg), same workshop format, but with TCT technology that almost completely eliminates cutter maintenance. For those who want 310 mm width in a light format and want to add the advantage of TCT without moving to heavier machines like the AD 310 S (295 kg). The 8 m\/min feed rate, higher than the AD 310 S (6 m\/min), makes it more productive for roughing softwoods. In Krollit customers' workshops, it is chosen by carpenters who value the combination of lightness + minimal maintenance.\u003c\/p\u003e\n\u003ch3\u003ePT 310 S vs AD 310 S: the choice between lightness and mass\u003c\/h3\u003e\n\u003cp\u003eSame width (310 mm), same TCT cutterblock, but different structure. The PT 310 S weighs 180 kg and has a 1,300 mm jointer table; the AD 310 S weighs 295 kg with a 1,610 mm table. The mass of the AD 310 S provides more stability on large and heavy pieces; the PT 310 S is more manageable and takes up less space. The thicknessing height is identical (180 mm for the PT 310 S vs 225 mm for the AD 310 S); those who work pieces up to 225 mm high must choose the AD 310 S.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days for Southern Italy). Original Bernardo spare parts available from stock with 3-5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo PT 310 S – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThree-phase 400V required. TCT is also appreciated in hobby use for minimal maintenance. For pure hobby use, consider single-phase versions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ artisan (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e310 mm with TCT in a 180 kg format: the optimal combination for workshops with limited space that want to eliminate sharpening from their routine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eFor intensive cycles on large pieces, consider the AD 310 S (295 kg, more stable) or the ADM 300 with helical roller. The PT 310 S is suitable for shifts up to 6 hours.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e pieces with thicknessing height over 180 mm (consider AD 310 S with 225 mm); workshops without three-phase 400V; production of very heavy pieces requiring the structural mass of the AD 310 S.\u003c\/p\u003e\n\u003ch3\u003eJointer (surface planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e990 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e30 pcs reversible (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1,110 × 130 mm – prismatic guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence inclination\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e305 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknessing table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction connection\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,300 × 900 × 1,180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 180 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, planer cutterblock guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 30 TCT inserts installed\u003c\/li\u003e\n\u003cli\u003eSpare TCT inserts\u003c\/li\u003e\n\u003cli\u003eSafety push block\u003c\/li\u003e\n\u003cli\u003eAdjustment gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between PT 310 S and PT 310 (HSS)?\u003c\/summary\u003e\n\u003cp\u003eThe PT 310 S features a spiral cutterblock with 30 TCT inserts instead of the 3 HSS knives of the standard PT 310. Structure, weight (180 kg), dimensions, and motor (2.2 kW) are identical. TCT offers: approx. 50% noise reduction, 10-20 times longer cutting edge life, maintenance by rotating the insert without disassembly. The cost of the PT 310 S is higher but is recovered in saved maintenance in 12-18 months of professional use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the PT 310 S have the same thicknessing height as the AD 310 S?\u003c\/summary\u003e\n\u003cp\u003eNo. The PT 310 S has a maximum thicknessing height of 180 mm; the AD 310 S reaches 225 mm. If you work pieces with a height between 180 and 225 mm, the AD 310 S is necessary. For pieces up to 180 mm, the PT 310 S is sufficient and weighs 115 kg less (180 vs 295 kg).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is maintenance of TCT inserts performed on the PT 310 S?\u003c\/summary\u003e\n\u003cp\u003eEach TCT insert has 4 cutting edges. When the surface quality decreases, rotate the insert by 90° with a hex key (2 minutes, no cutterblock disassembly). Complete replacement only occurs when all 4 cutting edges are worn. With 30 inserts, you work on 1-3 at a time, progressively, without ever stopping production for a complete replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the 8 m\/min feed rate too fast for hardwoods?\u003c\/summary\u003e\n\u003cp\u003eFor hardwoods (oak, ash) with an 8 m\/min feed rate, it is advisable to reduce the depth of cut to 1-1.5 mm to avoid motor overload and fiber tear-out. For softwoods (pine, fir), the full 8 m\/min feed rate with 2-3 mm passes is feasible without problems. TCT handles speed variations better than HSS knives on woods with difficult grain.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,300 × 900 × 1,180 mm. For handling pieces, a clear space of at least 2 m in front and behind is needed. At 180 kg, it can be moved with a hand pallet truck on a flat floor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692584997192,"sku":"08-1039","price":1954.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_PT_310_S_con_albero_a_spirale_e_inserti_TCT.png?v=1760687034"},{"product_id":"bernardo-pt-260-s","title":"Bernardo PT 260 S Planer Thicknesser – 230\/400V with spiral cutter block","description":"\u003cp\u003eThe Bernardo PT 260 S jointer-planer offers a planing width of 260 mm, a jointer table of 1,050 mm, a helical cutter block Ø 55 mm with 24 TCT inserts at 6,700 rpm, a thicknessing height of 5-150 mm, a feed rate of 6 m\/min, a 1.8 kW motor available in both 230V single-phase and 400V three-phase, and an integrated dust collector with bag. Weight 89 kg. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 260 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointer table (length):\u003c\/strong\u003e 1,050 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 55 mm helical, 24 TCT inserts, 6,700 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 6 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.8 kW S1 \/ 2.5 kW S6 – 230V single-phase or 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 89 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the PT 260 S and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo PT 260 S is a professional combined planer with a 260 mm planing width, TCT helical cutter block, semi-stationary structure, and dual power supply options. The integrated dust collector with a dust bag and the aluminum planing tables with noise-reducing slots distinguish the PT 260 S as an intermediate machine between benchtop planers and heavy stationary machines. Its 89 kg weight provides sufficient stability for daily artisan use without requiring a special foundation. The thicknessing table, guided on 4 columns, ensures uniform feeding even for heavy workpieces up to 150 mm in height. In Krollit customers' workshops, it is a typical choice for small carpentry shops (1-3 employees) looking for a compact planer with performance superior to benchtop models, offering flexibility between single-phase and three-phase power.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe PT 260 S occupies a precise position in the Bernardo range: above the single-phase PT 250\/305 S (strictly benchtop format) and below the stationary AD 260 (with longer tables, weighing 200+ kg). The difference with the PT 250 S is not only dimensional (260 vs 255 mm) but constructive: longer tables, integrated dust collector, dual power supply, higher structural weight. Compared to the PT 305 S, the PT 260 S foregoes the extra 45 mm of width but offers the advantage of an integrated dust collector and three-phase availability. The typical choice: PT 260 S for those who want a compromise between portability and professional performance at 260 mm; PT 305 S for those who prioritize maximum width in single-phase.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). At 89 kg, it requires careful handling: using a pallet truck or two people for repositioning is recommended. Original Bernardo replacement TCT inserts, belts, and accessories are available from stock with 3-5 business day shipping. Customer support is available in Italian.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the PT 260 S for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eMachine designed for professional use: for purely hobbyist use, the expense might be disproportionate. Consider the lower-cost PT 250 S if a 255 mm width is sufficient.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall carpentry \/ artisan (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e260 mm width with integrated dust collector and dual power supply: a practical combination for artisan workshops with daily use. 1,050 mm jointer table handles medium-long workpieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eIn the 400V three-phase version with 89 kg structural weight, it is dimensioned for prolonged shifts. For industrial production with larger widths, consider the stationary AD 260 S or the ADM range.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e operations requiring a thicknessing height over 150 mm (consider the stationary range); widths over 260 mm (consider the PT 305 S at 300 mm or AD 310 at 310 mm); production with workpieces over 1.8 m requiring longer tables.\u003c\/p\u003e\n\n\u003ch3\u003eJointer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJointer table length\u003c\/td\u003e\n\u003ctd\u003e1,050 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e885 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. jointer depth of cut\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e640 × 125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective thicknessing width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking height (min – max)\u003c\/td\u003e\n\u003ctd\u003e5 – 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e480 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. thicknessing depth of cut\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e6 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCutter block and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block diameter\u003c\/td\u003e\n\u003ctd\u003eØ 55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block type\u003c\/td\u003e\n\u003ctd\u003eHelical with 24 TCT inserts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e6,700 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e1.8 kW (2.4 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.5 kW (3.4 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230V single-phase or 400V three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,110 × 720 × 1,030 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 89 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHelical cutter block Ø 55 mm with 24 mounted TCT inserts\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003eIntegrated dust collector\u003c\/li\u003e\n\u003cli\u003eDust bag\u003c\/li\u003e\n\u003cli\u003ePush handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIs the 230V or 400V version better?\u003c\/summary\u003e\n\u003cp\u003eThe 400V three-phase version is preferable if the workshop has a three-phase line available: the motor has more constant torque and better thermal management during continuous use. The 230V single-phase is the only choice for those who only have a standard domestic outlet.\u003c\/p\u003e\n\u003cp\u003eThe practical difference is seen in intensive use: the 400V three-phase motor maintains power better on startup and manages heat better during prolonged shifts. In intermittent use, the two versions offer similar performance. For workshops with a three-phase line, there is no advantage in choosing the 230V.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes the integrated dust collector replace an external dust collector?\u003c\/summary\u003e\n\u003cp\u003eFor hobbyist-artisan use, yes; for intensive professional use, it is preferable to connect an external dust collector via the Ø 75 mm port. The integrated dust collector is sized to handle chips produced during standard processing.\u003c\/p\u003e\n\u003cp\u003eThe integrated dust collector with bag is a practical solution for workshops that do not have fixed dust extraction systems. For resinous woods or MDF, which produce abundant fine dust, it is recommended to connect to an external dust collector like the MSA 750 or higher to better manage the air in the workshop and reduce respiratory risk.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference with the stationary AD 260 S?\u003c\/summary\u003e\n\u003cp\u003eThe AD 260 S has longer cast iron tables (1,450 mm vs 1,050 mm) and a higher weight (approx. 200 kg). The PT 260 S is in a compact format with aluminum tables. Same width, differentiated performance.\u003c\/p\u003e\n\u003cp\u003eFor intensive continuous use (over 6 hours daily), the AD 260 S offers greater vibrational stability; for hobby and artisan use, the aluminum tables of the PT 260 are adequate. The price difference between the two machines is significant, so the choice depends on the expected workload.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I take a 4 mm jointing cut to quickly flatten a rough board?\u003c\/summary\u003e\n\u003cp\u003eNo, the maximum jointing depth of cut is 3 mm. For removals greater than this, multiple consecutive passes with progressive adjustment of the infeed table are necessary.\u003c\/p\u003e\n\u003cp\u003eRemovals of 3 mm per pass are already substantial for a planer in this range: on hardwoods like oak or ash, it is advisable to limit to 1.5-2 mm to avoid overloading the motor and preserve surface quality. Effective planing of very warped boards always requires multiple progressive passes, regardless of the planer's power.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine dimensions are 1,110 × 720 × 1,030 mm. For workpiece movement, clear space of at least 1.8 m in front and behind is needed, for a total operating area of approximately 4.5 × 1.2 m.\u003c\/p\u003e\n\u003cp\u003eThe working height of 885 mm is optimal for operators of average height. The 89 kg weight allows placement on a standard industrial floor without special foundations. For thicknessing mode on workpieces over 1 m, a roller support on the outfeed is recommended to prevent deflection.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"230 V","offer_id":50692762534216,"sku":"08-10220","price":1415.25,"currency_code":"EUR","in_stock":true},{"title":"400 V","offer_id":50692762566984,"sku":"08-10230","price":1415.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_PT_260_S_Pialla_filo_e_spessore_con_albero_elicoidale_260_mm.jpg?v=1757512500"},{"product_id":"lavorazione-legno-record-power-pt310-hb-pialla-filo-spessore","title":"Record Power PT310-HB Planer Thicknesser Planer Thicknesser with Spiral Cutterblock","description":"\u003cp\u003eThe Record Power PT310-HB Planer Thicknesser with Spiral Cutterblock is a planer thicknesser for professional use, weighing 202 kg. Krollit, official Record Power distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax working width: 310 mm\u003c\/li\u003e\n\u003cli\u003eMax planing depth: 3 mm\u003c\/li\u003e\n\u003cli\u003eMax thicknessing depth: 3 mm\u003c\/li\u003e\n\u003cli\u003eThicknessing feed speed: 7 m\/min\u003c\/li\u003e\n\u003cli\u003eNumber of inserts: 56\u003c\/li\u003e\n\u003cli\u003eInsert dimensions: 15 × 15 × 2.5 × R150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the PT310-HB Planer Thicknesser with Spiral Cutterblock and for what\u003c\/h3\u003e\n\u003cp\u003eThe PT310-HB Planer Thicknesser with Spiral Cutterblock is a planer thicknesser for professional use distributed by Krollit.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Record Power range\u003c\/h3\u003e\n\u003cp\u003eThe Record Power PT310-HB Planer Thicknesser with Spiral Cutterblock is part of the Record Power planer thicknesser range, distributed in Italy by Krollit since 2007. The Record Power range includes models of various categories and performance levels: to choose the machine suitable for your use case, you can consult the Record Power catalog on Krollit or contact customer support for assistance with selection.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eMachine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Italian customer service available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.\u003c\/p\u003e\n\u003ch3\u003eWho is the PT310-HB Planer Thicknesser with Spiral Cutterblock for\u003c\/h3\u003e\n\u003cp\u003eThe PT310-HB planer thicknesser with spiral cutterblock is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional carpentry shops\u003c\/strong\u003e: planing and thicknessing of boards, battens, and solid wood with precise dimensional tolerance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFurniture manufacturers and window\/door frame production\u003c\/strong\u003e: surface preparation and board calibration before subsequent assembly processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e planing chipboard or MDF panels (machine for solid wood: composite panels damage the blades, consider sanding machines).\u003c\/p\u003e\n\u003ch3\u003eWorking Capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax working width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax planing depth\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thicknessing depth\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknessing feed speed\u003c\/td\u003e\n\u003ctd\u003e7 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions, and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert dimensions\u003c\/td\u003e\n\u003ctd\u003e15 × 15 × 2.5 × R150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e202 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1407 × 745 × 1005 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor (single-phase)\u003c\/td\u003e\n\u003ctd\u003e2.75 kW absorbed \/ 2.2 kW output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor (three-phase)\u003c\/td\u003e\n\u003ctd\u003e2.75 kW absorbed \/ 2.1 kW output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230 V (1~) \/ 400 V (3~)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorbed current\u003c\/td\u003e\n\u003ctd\u003e14 A (1~) \/ 4.5 A (3~)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound power\u003c\/td\u003e\n\u003ctd\u003e98 \/ 107 dB(A) (idle \/ load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound pressure\u003c\/td\u003e\n\u003ctd\u003e89 \/ 98 dB(A) (idle \/ load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of inserts\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction diameter\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock type\u003c\/td\u003e\n\u003ctd\u003eSpiral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat planing width does the PT310-HB Planer Thicknesser with Spiral Cutterblock offer?\u003c\/summary\u003e\n\u003cp\u003eSee \"Planing width\" in the technical table: typically from 250 to 410 mm.\u003c\/p\u003e\n\u003cp\u003eThe width determines the maximum width of the board that can be processed in a single pass. Wider boards require a double pass or a larger machine.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eBladed or spiral cutterblock?\u003c\/summary\u003e\n\u003cp\u003eSee the model: the \"S\" or \"Spiral\" version features a helical cutterblock with HM inserts, while others use standard HSS blades.\u003c\/p\u003e\n\u003cp\u003eThe spiral cutterblock produces less noise, a better finish, and 5-10 times longer tool life, but it costs more. The inserts can be rotated individually when worn.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eMinimum and maximum working thickness?\u003c\/summary\u003e\n\u003cp\u003eSee \"Min\/max thickness\" in the technical table: typically from 4 mm to 230 mm in height.\u003c\/p\u003e\n\u003cp\u003eThe minimum thickness is limited by the safety devices; the maximum depends on the clearance under the thicknessing cutterblock.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it have quick change for planing\/thicknessing?\u003c\/summary\u003e\n\u003cp\u003eProfessional models allow changing functions in a few seconds by tilting the tables.\u003c\/p\u003e\n\u003cp\u003eReduced setup time is advantageous for those who frequently alternate between the two functions in series production.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee \"Voltage\" in the table: typically 400 V three-phase for professional machines.\u003c\/p\u003e\n\u003cp\u003eModels with motors over 2.2 kW require a three-phase line. Verify availability in the workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Record Power","offers":[{"title":"230V","offer_id":52234457284936,"sku":"48503","price":3328.06,"currency_code":"EUR","in_stock":false},{"title":"400V","offer_id":52234457317704,"sku":"48504","price":3328.06,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Record_Power_PT310-HB_con_albero_a_spirale.jpg?v=1766490824"},{"product_id":"lavorazione-legno-record-power-pt107-albero-spirale","title":"Record Power PT107 Planer Thicknesser Planer Thicknesser with Spiral Cutterblock","description":"\u003cp\u003eThe Record Power PT107 Planer Thicknesser with Spiral Cutterblock is a professional-grade planer thicknesser, weighing 162 kg. Krollit has been an official Record Power distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax working width: 265 mm\u003c\/li\u003e\n\u003cli\u003ePlaner table: 1100 × 265 mm\u003c\/li\u003e\n\u003cli\u003eThicknesser table: 600 × 265 mm\u003c\/li\u003e\n\u003cli\u003eMax thicknessing height: 190 mm\u003c\/li\u003e\n\u003cli\u003ePlaner depth of cut: 3 mm\u003c\/li\u003e\n\u003cli\u003eThicknesser depth of cut: 2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the PT107 Planer Thicknesser with Spiral Cutterblock and for what\u003c\/h3\u003e\n\u003cp\u003eThe PT107 Planer Thicknesser with Spiral Cutterblock is a professional-grade planer thicknesser distributed by Krollit.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Record Power range\u003c\/h3\u003e\n\u003cp\u003eThe Record Power PT107 Planer Thicknesser with Spiral Cutterblock is part of the Record Power range of planer thicknessers, distributed in Italy by Krollit since 2007. The Record Power range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Record Power catalog on Krollit or contact customer support for selection assistance.\u003c\/p\u003e\n\u003ch3\u003eWho the PT107 Planer Thicknesser with Spiral Cutterblock is for\u003c\/h3\u003e\n\u003cp\u003eThe PT107 Planer Thicknesser with Spiral Cutterblock is recommended for the following professional profiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional joineries\u003c\/strong\u003e: planing and thicknessing of boards, strips, and solid wood with precise dimensional tolerance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFurniture manufacturers and window\/door production\u003c\/strong\u003e: surface preparation and board calibration before subsequent assembly operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e planing chipboard or MDF panels (this machine is for solid wood: composite panels will damage the knives; consider calibrating machines).\u003c\/p\u003e\n\u003ch3\u003eWorking capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax working width\u003c\/td\u003e\n\u003ctd\u003e265 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table\u003c\/td\u003e\n\u003ctd\u003e600 × 265 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax thicknessing height\u003c\/td\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaner depth of cut\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser depth of cut\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser feed speed\u003c\/td\u003e\n\u003ctd\u003e5 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTable, dimensions, and geometry\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaner table\u003c\/td\u003e\n\u003ctd\u003e1100 × 265 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert dimensions\u003c\/td\u003e\n\u003ctd\u003e15 × 15 × 2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e162 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e230 V \/ 50 Hz \/ 3 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound power\u003c\/td\u003e\n\u003ctd\u003e85 \/ 106 dB(A) (idle \/ load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound pressure\u003c\/td\u003e\n\u003ctd\u003e83 \/ 100 dB(A) (idle \/ load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOther specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpiral cutterblock diameter\u003c\/td\u003e\n\u003ctd\u003e75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInserts\u003c\/td\u003e\n\u003ctd\u003e26 or 44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert rows\u003c\/td\u003e\n\u003ctd\u003e2 ROWS: 26 \/ 4 ROWS: 44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert screw\u003c\/td\u003e\n\u003ctd\u003eTorx M6 × 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1080 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat planing width does the PT107 Planer Thicknesser with Spiral Cutterblock offer?\u003c\/summary\u003e\n\u003cp\u003eSee \"Planing width\" in the technical table: typically from 250 to 410 mm.\u003c\/p\u003e\n\u003cp\u003eThe width determines the maximum width of the board that can be worked in a single pass. For wider boards, a double pass or a larger machine is required.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eKnife cutterblock or spiral cutterblock?\u003c\/summary\u003e\n\u003cp\u003eSee the model: the \"S\" or \"Spiral\" version features a helical cutterblock with HSS inserts, while others have standard HSS knives.\u003c\/p\u003e\n\u003cp\u003eThe spiral cutterblock produces less noise, a better finish, and 5-10 times longer tool life, but it costs more. The inserts can be rotated individually when worn.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eMinimum and maximum workable thickness?\u003c\/summary\u003e\n\u003cp\u003eSee \"Min\/max thickness\" in the technical table: typically from 4 mm to 230 mm in height.\u003c\/p\u003e\n\u003cp\u003eThe minimum thickness is limited by the safety of the protective devices; the maximum depends on the clearance under the thicknessing cutterblock.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it have quick change for planing\/thicknessing?\u003c\/summary\u003e\n\u003cp\u003eProfessional models allow changing between functions in a few seconds by tilting the tables.\u003c\/p\u003e\n\u003cp\u003eReduced setup time is advantageous for those who frequently alternate between the two functions in series production.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat power supply does it require?\u003c\/summary\u003e\n\u003cp\u003eSee \"Voltage\" in the table: typically 400 V three-phase for professional machines.\u003c\/p\u003e\n\u003cp\u003eModels with motors over 2.2 kW require a three-phase line. Verify availability in your workshop before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Record Power","offers":[{"title":"44 TCT","offer_id":52234279223624,"sku":"47504","price":2292.03,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Record_Power_PT107_con_albero_a_spirale.png?v=1776103057"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/collections\/pialla-a-filo-e-spessore-con-albero-a-spirale.png?v=1753695828","url":"https:\/\/www.krollit.com\/collections\/planer-filo-spessore-shaft-helical.oembed","provider":"Krollit","version":"1.0","type":"link"}