{"title":"Surface planers","description":"\u003cstrong\u003ePlaners\u003c\/strong\u003e are the essence of precision woodworking. With the ability to sand and trim with extreme accuracy, these machines are essential for any woodworker or hobbyist looking for flawless results on their projects. Discover how planers can take your woodworking to the next level of perfection.","products":[{"product_id":"bernardo-sp-150pn-400v","title":"Bernardo SP 150 PN Jointer - 400V","description":"\u003cp\u003eThe Bernardo SP 150 PN – 400V jointer offers a planing width of 150 mm, a total table length of 1,230 mm (infeed 590 mm + outfeed 585 mm), a Ø 60 mm cutterblock with 3 HSS knives at 4,500 rpm, a maximum cutting depth of 8 mm, and a 1.1 kW three-phase 400V motor. Weight: 115 kg. This machine is a jointer only; it does not have a thicknessing function. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Jointer only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width:\u003c\/strong\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal table length:\u003c\/strong\u003e 1,230 mm (590 infeed + 585 outfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e Ø 60 mm – 3 HSS knives – 4,500 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. cutting depth:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.1 kW S1 \/ 1.5 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 115 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the SP 150 PN – 400V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo SP 150 PN – 400V is the version with HSS knives (not TCT) of the three-phase SP 150: same width (150 mm), same table (1,230 mm), same motor, but with 3 HSS knives instead of the 28 TCT inserts of the SP 150 PS. \"PN\" indicates the version with normal knives (Plain Normal). Compared to the SP 150 PS, the PN has one more knife (3 vs 2 in the HSS variant of the PS, note: the PS has 28 TCT inserts) and the same Ø 60 mm cutterblock. The choice between PN and PS depends on the preference for cutting edge technology: HSS with periodic sharpening (PN) vs TCT with insert rotation (PS). The PN has a lower purchase cost; the PS has lower long-term maintenance costs.\u003c\/p\u003e\n\u003ch3\u003eSP 150 PN vs SP 150 PS: which to choose\u003c\/h3\u003e\n\u003cp\u003eThe SP 150 PN is equipped with 3 HSS knives on a Ø 60 mm cutterblock, the same diameter and speed (4,500 rpm) as the SP 150 PS. The PS is equipped with 28 TCT inserts. The PN requires periodic knife sharpening; the PS only requires rotation of the inserts when worn. For those who do not want to change technology and already have experience with HSS sharpening, the PN is the natural choice. For those who want to eliminate sharpening from their routine, the PS is superior.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South of Italy). Original Bernardo spare parts available from stock with 3-5 business days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo SP 150 PN – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eDedicated jointer with three-phase power: not suitable for standard hobby use. For hobbies, consider combined jointer-planer machines in single-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuthier \/ restorer with three-phase power\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003e150 mm with HSS knives and 1,230 mm table: suitable for narrow pieces. For those who want minimal maintenance, consider the SP 150 PS with TCT.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery with separate thicknesser\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eDedicated jointer to complement an existing thicknesser. The PN has a lower cost than the PS; the PS has lower long-term maintenance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without 400V three-phase power (choose SP 150 PN – 230V); pieces over 150 mm wide; those who also need a thicknessing function.\u003c\/p\u003e\n\u003ch3\u003eJointer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfeed table\u003c\/td\u003e\n\u003ctd\u003e590 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutfeed table\u003c\/td\u003e\n\u003ctd\u003e585 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal table length\u003c\/td\u003e\n\u003ctd\u003e1,230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e820 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e3 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,500 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cutting depth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e740 × 100 mm, inclinable 90°–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e1.1 kW (1.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e1.5 kW (2.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,230 × 530 × 1,180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e115 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 HSS knives mounted\u003c\/li\u003e\n\u003cli\u003eKnife setting gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SP 150 PN and SP 150 PS?\u003c\/summary\u003e\n\u003cp\u003eThe SP 150 PN is equipped with 3 HSS knives on a Ø 60 mm cutterblock, which require periodic sharpening. The SP 150 PS is equipped with 28 TCT inserts on the same cutterblock, which are rotated when worn, without disassembly. Same cutterblock, same speed (4,500 rpm), same table (1,230 mm), same motor, same weight. The PN has a lower purchase cost; the PS has lower long-term maintenance. The choice depends on technological preference and intensity of use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SP 150 PN have a thicknessing function?\u003c\/summary\u003e\n\u003cp\u003eNo. The SP 150 PN is exclusively a jointer. For a combined jointer-planer function, consider the PT family planers (PT 260, PT 310) or the AD\/ADM Bernardo family.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should the 3 HSS knives be sharpened?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (4-6 hours\/day) on medium woods, sharpening is necessary every 2-4 weeks. Original Bernardo replacement knives are available from Krollit stock with 3-5 business days shipping. For those who want to reduce the frequency of sharpening, consider the SP 150 PS with TCT inserts.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine dimensions are 1,230 × 530 × 1,180 mm. With 115 kg, it can be moved with a manual pallet truck. The width of 530 mm allows for placement even in narrow workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SP 150 PN – 400V and SP 150 PN – 230V?\u003c\/summary\u003e\n\u003cp\u003eIdentical constructive specifications. The difference is only in the power supply: three-phase 400V vs single-phase 230V. If three-phase is available, the 400V version is preferable; if not, the 230V is necessary.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692629954888,"sku":"08-10131","price":991.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_Bernardo_SP_150_PN_con_tavoli_in_ghisa_rettificata..jpg?v=1760545108"},{"product_id":"bernardo-sp-150pn-230v","title":"Bernardo SP 150 PN Jointer - 230V","description":"\u003cp\u003eThe Bernardo SP 150 PN – 230V planer offers a planing width of 150 mm, a total table length of 1,230 mm (infeed 590 mm + outfeed 585 mm), a Ø 60 mm cutter block with 3 HSS knives at 4,500 rpm, a maximum cutting depth of 8 mm, and a 1.1 kW single-phase 230V motor. Weight 115 kg. This is a jointer only, it does not have a thicknessing function. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e jointer only (planer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width:\u003c\/strong\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal table length:\u003c\/strong\u003e 1,230 mm (590 infeed + 585 outfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 60 mm – 3 HSS knives – 4,500 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. cutting depth:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.1 kW S1 \/ 1.5 kW S6 – 230V single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 115 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the SP 150 PN – 230V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo SP 150 PN – 230V is identical to the 400V version in everything except the power supply: single-phase 230V instead of three-phase. Same width (150 mm), same table (1,230 mm), same cutter block with 3 HSS knives, same weight (115 kg). For workshops without a three-phase system looking for a dedicated 150 mm jointer, luthiers, restorers, wood artisans who already have a separate thicknesser and work in non-industrial premises.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 business days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo SP 150 PN – 230V for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eDedicated single-phase jointer. For hobby use without a separate thicknesser, consider combined planer-thicknesser machines.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuthier \/ restorer without three-phase\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e150 mm with HSS knives and 1,230 mm table in single-phase 230V: the dedicated jointer for those working narrow pieces in workshops without three-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarpentry workshop with separate thicknesser and without three-phase\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eAs a dedicated jointer alongside an existing thicknesser. For those with three-phase available, prefer SP 150 PN – 400V.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops with three-phase available (prefer SP 150 PN – 400V); pieces over 150 mm wide; those who also need a thicknessing function.\u003c\/p\u003e\n\u003ch3\u003eJointer (Planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfeed table\u003c\/td\u003e\n\u003ctd\u003e590 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutfeed table\u003c\/td\u003e\n\u003ctd\u003e585 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal table length\u003c\/td\u003e\n\u003ctd\u003e1,230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e820 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e3 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e4,500 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cutting depth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e740 × 100 mm, inclinable 90°–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e1.1 kW (1.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e1.5 kW (2.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230V – single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,230 × 530 × 1,180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e115 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SP 150 PN – 230V and SP 150 PN – 400V?\u003c\/summary\u003e\n\u003cp\u003eNo constructive difference: same width, same HSS cutter block, same table, same dimensions and weight. The difference is exclusively in the power supply: single-phase 230V vs three-phase 400V. With three-phase available, the 400V version is preferable; without three-phase, the 230V is the only viable option.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SP 150 PN – 230V have a thicknessing function?\u003c\/summary\u003e\n\u003cp\u003eNo. It is exclusively a jointer. For the combined planer-thicknesser function in single-phase, consider ADM 260 – 230V or FS 310 P – 230V.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should the 3 HSS knives be sharpened?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (4-6 hours\/day) every 2-4 weeks on softwoods, every 1-2 weeks on hardwoods. To reduce maintenance frequency, consider the SP 150 PS – 230V with TCT inserts.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,230 × 530 × 1,180 mm. At 115 kg, it can be moved with a manual pallet jack. The width of 530 mm allows positioning even in narrow workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SP 150 PN and SP 150 PS?\u003c\/summary\u003e\n\u003cp\u003eThe SP 150 PN has 3 HSS knives; the SP 150 PS has 28 TCT inserts. Same Ø 60 mm cutter block, same speed (4,500 rpm), same table, same weight. The PN has a lower purchase cost and requires periodic sharpening; the PS has a higher purchase cost but almost no maintenance.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692711842120,"sku":"08-10130","price":991.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_Bernardo_SP_150_PN_con_tavoli_in_ghisa_rettificata.jpg?v=1760540639"},{"product_id":"bernardo-sp-200pn-230v","title":"Bernardo SP 200 PN Jointer – 230V","description":"\u003cp\u003eThe Bernardo SP 200 PN – 230V planer offers a planing width of 200 mm, a total table length of 1,805 mm (infeed 880 mm + outfeed 880 mm), a Ø 72 mm cutter block with 4 HSS knives at 4,800 rpm, a maximum cutting depth of 8 mm, and a 2.2 kW single-phase 230V motor. Weight 181 kg. This machine is a jointer only; it does not have a thicknessing function. Produced in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Jointer only (planer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width:\u003c\/strong\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal table:\u003c\/strong\u003e 1,805 mm (880 infeed + 880 outfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 72 mm – 4 HSS knives – 4,800 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. cutting depth:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 kW S1 \/ 3.0 kW S6 – 230V single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 181 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the SP 200 PN – 230V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo SP 200 PN – 230V is identical to the 400V version in everything except the power supply: single-phase 230V instead of three-phase. Same 1,805 mm table, same cutter block with 4 HSS knives, same weight (181 kg). For joiners, restorers, and parquet manufacturers who work in workshops without a three-phase system and are looking for a dedicated jointer with a long table for pieces up to 200 mm wide. The 2.2 kW single-phase motor is sized for continuous professional use on medium woods for up to 6-7 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 working days shipping. Italian customer assistance available.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo SP 200 PN – 230V for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eProfessional jointer weighing 181 kg. For hobby use, consider lighter combined planer-thicknessers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoiner \/ parquet manufacturer without three-phase\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e1,805 mm table for long boards, 200 mm width, 4 HSS knives at 4,800 rpm in single-phase 230V: the dedicated jointer for those without three-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoinery with separate thicknesser without three-phase\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eAs a dedicated jointer alongside an existing thicknesser. For those with three-phase, prefer SP 200 PN – 400V or SP 200 PS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops with available three-phase (prefer SP 200 PN – 400V or SP 200 PS); pieces over 200 mm wide; those also requiring the thicknessing function.\u003c\/p\u003e\n\u003ch3\u003eJointer (planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfeed table\u003c\/td\u003e\n\u003ctd\u003e880 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutfeed table\u003c\/td\u003e\n\u003ctd\u003e880 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal table length\u003c\/td\u003e\n\u003ctd\u003e1,805 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e840 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e4 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e4,800 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cutting depth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1,020 × 125 mm, inclinable 90°–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230V – single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,805 × 660 × 1,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e181 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 HSS knives mounted\u003c\/li\u003e\n\u003cli\u003eKnife setting jig\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SP 200 PN – 230V and SP 200 PN – 400V?\u003c\/summary\u003e\n\u003cp\u003eNo structural difference: same operational specifications, same table, same cutter block, same weight. The only difference is in the power supply: single-phase 230V vs three-phase 400V. If three-phase is available, the 400V version is always preferable for more uniform motor torque; without three-phase, the 230V is the only viable option.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SP 200 PN – 230V have a thicknessing function?\u003c\/summary\u003e\n\u003cp\u003eNo. It is exclusively a jointer. For the combined jointer+thicknesser function in single-phase at similar widths, consider the ADM 260 – 230V (250 mm) or FS 310 P – 230V (310 mm).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should the 4 HSS knives be sharpened?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (6-8 hours\/day) on medium woods, every 2-3 weeks. On hard woods, every 1-2 weeks. To reduce maintenance frequency, consider the SP 200 PS with TCT inserts.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine dimensions are 1,805 × 660 × 1,200 mm. For handling long pieces, at least 2 m of free space is needed in front and behind. With 181 kg Bernardo shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan the 2.2 kW single-phase motor handle continuous professional use?\u003c\/summary\u003e\n\u003cp\u003eYes, for shifts of up to 6-7 hours on medium woods. On hard woods (oak, ash), it is advisable to reduce the cutting depth to 1.5-2 mm and take short breaks every 30-45 minutes. A dedicated line with a thermal-magnetic circuit breaker of at least 16A is recommended to avoid trips during startup.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692712563016,"sku":"08-10140","price":1573.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_Bernardo_SP_200_PN_con_tavoli_in_ghisa_rettificata..jpg?v=1760539443"},{"product_id":"bernardo-sp-200pn-400v","title":"Bernardo SP 200 PN Jointer – 400V","description":"\u003cp\u003eThe Bernardo SP 200 PN – 400V planer offers a planing width of 200 mm, a total table length of 1,805 mm (880 mm infeed + 880 mm outfeed), a Ø 72 mm cutter block with 4 HSS knives at 4,800 rpm, a maximum cutting depth of 8 mm, and a 2.2 kW three-phase 400V motor. Weight 181 kg. This machine is for surface planing only; it does not have a thicknessing function. Manufactured in Austria, distributed in Italy by Krollit as the official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e surface planing only (jointer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width:\u003c\/strong\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal table length:\u003c\/strong\u003e 1,805 mm (880 infeed + 880 outfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 72 mm – 4 HSS knives – 4,800 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. cutting depth:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 kW S1 \/ 3.0 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 181 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the SP 200 PN – 400V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo SP 200 PN – 400V is the version with HSS knives (4 knives, not TCT) of the three-phase SP 200: same long table of 1,805 mm, same Ø 72 mm cutter block at 4,800 rpm, same 2.2 kW motor, but with 4 HSS knives instead of the 36 TCT inserts of the SP 200 PS. \"PN\" indicates normal knives. The choice between SP 200 PN and SP 200 PS depends on the preference for cutting edge technology and intensity of use: the PN has a lower purchase cost, the PS has lower maintenance over time. For window and door manufacturers and parquet producers with separate thicknessers who value the long 1,805 mm table for long and narrow pieces.\u003c\/p\u003e\n\u003ch3\u003eSP 200 PN vs SP 200 PS: which to choose\u003c\/h3\u003e\n\u003cp\u003eSame structure, same motor, same weight (181 kg), same table (1,805 mm). The PN is fitted with 4 HSS knives, sharpening every 1-4 weeks. The PS is fitted with 36 TCT inserts, rotation every 6-10 weeks per insert. Lower purchase cost for PN; higher maintenance cost over time. For those who do not want to change technology and already have experience with HSS sharpening, the PN is the natural choice.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo SP 200 PN – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eProfessional 181 kg jointer with three-phase. For hobby use, consider combined planer\/thicknesser machines.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWindow\/door manufacturer \/ parquet producer\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e1,805 mm table for long planks and beams, 200 mm width, 4 HSS knives at 4,800 rpm: suitable for reference surfacing on long and narrow pieces in three-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoinery with separate thicknesser\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eFor those who prefer HSS knives over TCT and have three-phase available. For those who want minimal maintenance, consider SP 200 PS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without three-phase 400V (choose SP 200 PN – 230V); pieces over 200 mm wide; those who also need a thicknessing function.\u003c\/p\u003e\n\u003ch3\u003eJointer (surface planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfeed table\u003c\/td\u003e\n\u003ctd\u003e880 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutfeed table\u003c\/td\u003e\n\u003ctd\u003e880 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal table length\u003c\/td\u003e\n\u003ctd\u003e1,805 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e840 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e4 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e4,800 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cutting depth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1,020 × 125 mm, tiltable 90°–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,805 × 660 × 1,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e181 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 HSS knives fitted\u003c\/li\u003e\n\u003cli\u003eKnife setting gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SP 200 PN and SP 200 PS?\u003c\/summary\u003e\n\u003cp\u003eThe SP 200 PN is fitted with 4 HSS knives; the SP 200 PS is fitted with 36 TCT inserts. Same Ø 72 mm cutter block, same speed (4,800 rpm), same table (1,805 mm), same motor, same weight (181 kg). The PN has a lower purchase cost and requires periodic sharpening; the PS has a higher purchase cost but almost no cutting edge maintenance. The choice depends on technological preference and intensity of use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the SP 200 PN have a thicknessing function?\u003c\/summary\u003e\n\u003cp\u003eNo. It is exclusively a surface planer. For the combined planer\/thicknesser function at 200 mm, the ADH 250 P – 400V or the PT 260 – 400V are the closest alternatives in terms of width.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should the 4 HSS knives be sharpened?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (6-8 hours\/day) on medium woods, sharpening is necessary every 2-3 weeks. On hardwoods every 1-2 weeks. Original Bernardo spare knives available from Krollit stock with 3-5 business day shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,805 × 660 × 1,200 mm. For handling long workpieces, clear space of at least 2 m in front and behind is required. With 181 kg Bernardo shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between SP 200 PN – 400V and SP 200 PN – 230V?\u003c\/summary\u003e\n\u003cp\u003eNo structural difference: same operational specifications. The only difference is the power supply: three-phase 400V vs single-phase 230V. With three-phase available, the 400V version is preferable for more uniform motor torque.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692712661320,"sku":"08-10141","price":1573.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_Bernardo_SP_200_PN_con_tavoli_in_ghisa_rettificata.jpg?v=1760538338"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/collections\/Piallatrici-a-filo-per-legno.png?v=1753696079","url":"https:\/\/www.krollit.com\/collections\/planers-filo.oembed","provider":"Krollit","version":"1.0","type":"link"}