Kroll Wate oil burner KG/UB 55 (37-54 kW)

Product code 027143
Category KG/UB55 37 - 54 kW
Brand Kroll
Availability yes
More items available upon order no
Attachments:

Manuale d'uso

Tip a friend

More questions ?

 
pin it
■ The fuels and their environmental compatibility
Mineral, vegetable and animal oils can be used as fuel without any significant
modifications to the burner.
All you have to do is turn a dial to re-adjust the pre-heating temperature
and the combustion air according to the fuel to be used:
■ rapeseed oil
■ sun flower oil
■ palm-oil
■ used deep-fry oils
■ animal oils
■ mineral oils

Due to ever increasing costs of mineral oils, vegetable oils have
become more and more important. Their energetic density is very close
to the values of heating oil. Vegetable oils are renewable, CO2-
neutral and do not contain any sulphur or heavy metals.

■ Economic efficiency
Being independent from the mineral oil market, can allow you to reduce
your fuel costs. Using cheap vegetable oil, e.g. rapeseed oil, can
save you hard cash. Farmers can be come self sufficient, growing their
own oil supplies. The low initial investment is also an important
factor, as the pay back is often a very short period. The Kroll universal
oil burner gives you the flexibility to choose your desired fuel based on
current market prices. The choice is yours! 
 
Stationary warm air heaters are the most economic way to heat commercial
or industrial halls, production halls, warehouses etc. And especially 
when they are run with a Kroll universal oil burner instead of a conventional
gas or oil burner. Kroll has got a large range of warm air heaters
which are especially matched for this use. Older and new boilers can easily be
equipped with a Kroll universal oil burner. With a Kroll universal oil burner,
you can choose the combustible according to your economic or ecological
points of view.
 
The technique…
The combustible is sprayed by compressed air at a relatively low pressure.
This allows the use of larger nozzles which do not get blocked
even if soiled or semi fluid oils are used.
A separate suction pump system gets the fuel out of the tank and
pumps it reliably to the burner, even over long distances. There, it is filtered,
to 100 micron and pre-heated to 35 °C in our heated filter. The oil
then enters the pre-heated tank on the burner and is heated to the
desired temperature, which is dependant on which oil is being
used – this is important for a constant quality of ignition and
combustion.
 
■ Safety…
Thermostatic and mechanical components reliably protect the burner
against overheating and spillage. The burners are TUV-approved
regarding electrical and mechanical safety and adhere to the most
stringent emission regulations.
 

 

  • For the connection to a warm air heater or warm water boiler
  • Suitable for a multitude of oil: Vegetable, animal and conventional
Technical data KG/UB20-P   KG/UB20   KG/UB55   KG/UB70   KGUB100   KG/UB150   KG/UB200
Boiler output (kW) 14-24 25-33 43-64 60-99 71-120 84-150 130-201
Oil flow (kg/h) 1.4-2.2 2.1-2.8 3.6-5.4 5.1-8.3 6.0-10.1 7.1-12.4 10.9-16.9
  Motor power  (V/Hz)
                        (W)
                        (A)
230~/50
110
0.85
230~/50
110
0.85
230~/50
110
0.85
230~/50
110
0.85
230~/50
110
0.85
230~/50
250
1.4
230~/50
250
1.4
  Heating power (W) 1100 1100 1100 1100 1100 1100 1100
Mains voltage
                        (V)
                        (W)
                        (A)

230~
1.210
6.0

230~
1210
6.0

230~
1210
6.0

230~
1210
6.0

230~
1210
6.0

230~
1350
6.4

230~
1350
6.4
Speed (rpm) 2800 2800 2800 2800 2800 2800 2800
Weight (kg) 15 15 15 16 16 26 26

 

Registered users can share their experience with this product. Register to access all of the benefits reserved to registered users or click on login if you are already registered.