{"product_id":"adh-250-p-400-v","title":"Bernardo ADH 250 P Planer Thicknesser – 400V","description":"\u003cp\u003eThe Bernardo ADH 250 P – 400V planer-thicknesser offers a planing width of 250 mm, a jointer table of 1,090 mm, a Ø 75 mm shaft with 3 HSS blades at 4,000 rpm, a maximum thicknessing height of 185 mm, a feed rate of 4.8 m\/min, and a 1.5 kW three-phase 400V motor. It weighs 148 kg and has dimensions of 1,100 × 750 × 1,010 mm. Manufactured in Austria, it is distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointer table (length):\u003c\/strong\u003e 1,090 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 185 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaner shaft:\u003c\/strong\u003e Ø 75 mm – 3 HSS blades – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknesser feed rate:\u003c\/strong\u003e 4.8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 kW S1 \/ 2.1 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 148 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the ADH 250 P and for what purpose\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo ADH 250 P – 400V is the most compact and lightweight combined jointer-thicknesser in Bernardo's professional range with a 250 mm width in its three-phase version. At 148 kg, it is 25 kg lighter than the AD 260 – 400V (173 kg) and significantly more compact (dimensions 1,100 × 750 mm vs 1,150 × 800 mm). The 1.5 kW motor places it in the entry-level segment: suitable for workshops with limited planing needs, where the 250 mm width and low weight are the main selection criteria. In Krollit customers' workshops, it is primarily used as a first machine by carpenters starting their business, or as a support planer in workshops already equipped with a main machine.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe ADH 250 P occupies the lowest end of Bernardo's three-phase combined planer range at 250 mm: 1.5 kW motor vs 2.0 kW for the AD 260 – 400V, jointing depth up to 5 mm (vs 3 mm for the AD 260), thicknessing height up to 185 mm (vs similar 185 mm). The main difference from the AD 260 is the smaller motor: sufficient for intermittent use and soft-medium woods, more limiting for intensive cycles on hardwoods. For those who can invest slightly more, the AD 260 – 400V offers a more appropriately sized motor for daily professional use.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo ADH 250 P – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eRequires a 400V three-phase system not available in home workshops. For hobby use in single-phase, consider the ADM 260 – 230V.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eFor workshops with limited planing needs (2-4 hours\/day) on soft and medium woods. The 1.5 kW motor is sufficient for non-intensive use at 250 mm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eThe 1.5 kW S1 motor is not sized for industrial cycles on hardwoods. Consider the AD 260 – 400V (2.0 kW) or ADM 300 – 400V (3.0 kW).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops without a 400V three-phase system (choose ADM 260 – 230V); pieces over 250 mm wide or over 185 mm high for thicknessing; intensive production on hardwoods for more than 3 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eJointer (Planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e830 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaner shaft – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003e3 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e715 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence inclination\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax depth of cut\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e245 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax depth of cut\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e4.8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e1.5 kW (2.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.1 kW (2.8 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,100 × 750 × 1,010 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e148 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, planer shaft protection, anti-restart interlock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 mounted HSS blades\u003c\/li\u003e\n\u003cli\u003eBlade setting gauge\u003c\/li\u003e\n\u003cli\u003e2 feed handles\u003c\/li\u003e\n\u003cli\u003ePush stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between ADH 250 P and AD 260 – 400V?\u003c\/summary\u003e\n\u003cp\u003eThe ADH 250 P has a 1.5 kW S1 motor (vs 2.0 kW for the AD 260), weighs 148 kg (vs 173 kg), has a slightly more compact footprint, and a jointing depth of up to 5 mm (vs 3 mm for the AD 260). The AD 260 has a faster feed rate (same 4.8 m\/min) but a more powerful motor for more intensive daily professional use. For intermittent use, the ADH 250 P is sufficient; for joinery workshops with 4-8 hour shifts, the AD 260 – 400V is the more suitable choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the 1.5 kW motor sufficient for professional work?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the intensity of use and the type of wood. For softwoods (pine, fir, poplar) with passes of 1-2 mm, the 1.5 kW motor is sufficient for continuous cycles of 3-4 hours. For hardwoods (oak, ash), it is recommended to reduce the depth of cut to 0.5-1 mm and take breaks every 30-45 minutes to prevent motor overheating. For daily professional use on hardwoods, the AD 260 – 400V with a 2.0 kW motor is preferable.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you switch from jointer to thicknesser?\u003c\/summary\u003e\n\u003cp\u003eThe alignment tables pivot on hinges to expose the thicknesser bed. The two supplied handles facilitate manual flipping of the tables. The operation takes about 30-60 seconds without tools. The Ø 100 mm dust extraction port remains accessible in both working modes.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I use the ADH 250 P to plane particle board or MDF?\u003c\/summary\u003e\n\u003cp\u003eNot recommended for frequent use. Particle board and MDF contain resins and abrasives that wear HSS knives much faster than solid wood. On these materials, the sharpening frequency can increase by 50-100%. For those who primarily work with panels, consider versions with a helical cutter block and TCT inserts available in other machines in the Bernardo range.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed to install the ADH 250 P?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,100 × 750 × 1,010 mm, among the most compact in Bernardo's professional combined planer range. For moving workpieces, a clear space of at least 1.8 m in front and behind is needed. At 148 kg, it can be moved with a manual pallet jack. Delivery is on a standard pallet, no special lifting equipment required.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50623950258504,"sku":"08-1019A","price":1177.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_ADH_250_P_400V_compatta.jpg?v=1757348634","url":"https:\/\/www.krollit.com\/products\/adh-250-p-400-v","provider":"Krollit","version":"1.0","type":"link"}