Reventon Cold Air Curtain AERIS C-1P 230V is a professional air curtain, weighing 13.5. Krollit, official Reventon distributor since 2007.
- Product code: AC100C1P
- Maximum air flow [m³/h]: 1770 / 1450 (2 speeds/1 speed)
- Maximum air speed [m/s]: 11 / 9 (2 speeds/1 speed)
- Curtain reach [m]: 3
- Voltage/Frequency [V/Hz]: 230/50
- Rated motor current [A]: 0.78 / 0.57 (2 speeds/1 speed)
Who uses the AERIS C-1P 230V Cold Air Curtain and for what purpose
The AERIS C-1P 230V Cold Air Curtain is a professional air curtain distributed by Krollit.
Its place in the Reventon range
Reventon Cold Air Curtain AERIS C-1P 230V is part of the Reventon air curtain range, distributed in Italy by Krollit since 2007. The Reventon range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Reventon catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the AERIS C-1P 230V Cold Air Curtain for
The AERIS C-1P 230V cold air curtain is recommended for the following professional profiles:
-
Commercial and industrial entrances with frequent opening: thermal separation between heated environments and the outside, reduction of heat dispersion.
-
Warehouses and industrial buildings with loading docks: maintaining internal temperature during loading and unloading.
Not suitable for: domestic environments or small offices (industrial machine: for small environments, light air curtains are sufficient).
Motor and power supply
| Voltage/Frequency [V/Hz] |
230/50 |
| Rated motor current [A] |
0.78 / 0.57 (2 speeds/1 speed) |
| Rated motor power [W] |
180 / 130 (2 speeds/1 speed) |
| Motor IP protection class |
E / IP20 |
Other specifications
| Product code |
AC100C1P |
| Maximum air flow [m³/h] |
1770 / 1450 (2 speeds/1 speed) |
| Curtain reach [m] |
3 |
| Noise level [dB]** |
56 / 54 (2 speeds/1 speed) |
| Maximum air speed [m/s] |
11 / 9 (2 speeds/1 speed) |
| Net weight [kg] |
13.5 |
Frequently asked questions
What is an air curtain used for?
It creates a vertical airflow that separates two environments with different temperatures, reducing thermal dispersion when doors are open.
Effectiveness depends on the entrance height, airflow velocity, and thermal differential. For entrances higher than 3 m, professional models with high-speed airflow are needed.
Heated or unheated: which one to choose?
Heated (water or electric) for entrances facing a cold exterior; unheated for separation between environments with similar temperatures.
Water-heated air curtains connect to the existing heating system with low consumption. Electric ones are simpler but with higher consumption. Cold ones only serve as an insulating barrier.
What power supply does it require?
The models shown are 230 V single-phase for standard installation; large industrial models require 400 V three-phase.
Check the available power supply on-site before purchase. Installation must be performed by a qualified electrician according to CEI standards.
How is it installed?
Horizontal mounting above the entrance, at a height of 2.5-4 m with the nozzle facing downwards. The flow must cover the entire width of the door.
Correct installation requires wall or ceiling brackets and electrical connection. For water models, hydraulic connection to the heating circuit is also required.
How much does it consume?
Consumption depends on thermal power: 5-10 kW models for small entrances, 15-30 kW for large industrial entrances.
To calculate annual consumption, consider the hours of door opening and the average thermal differential. Krollit provides technical support for correct sizing.
