Fabric sanding belt 2000 x 50 mm - K 60 (10 pieces)

Fabric belts are more flexible, tear-resistant, and curvature-tolerant — suitable for curved surfaces, edges, pipes, and metalworking. Paper belts are stiffer and suitable for flat wood and plastic surfaces. For metal, fabric is always preferable: it withstands the heat generated by friction better and does not tear with metal chips.

60 grit is suitable for medium roughing on steel, aluminum, and hardwood: significant material removal, joint blending. Typical materials: steel, aluminum, cast iron, hardwood. After K60 grit, move to K80–K100 before finishing. The electro-corundum (Al₂O₃) abrasive fabric in this series maintains its cutting edge longer than paper abrasive of the same grit.

Yes — fabric roll belts can be cut with sturdy scissors or a utility knife. The length from the roll (50 m) allows belts of any length to be made. Always cut perpendicular to the belt's direction of travel to prevent detachment at the edges during use.

Aluminum: use belts with a semi-open coat and, if possible, apply paraffin wax to the belt to reduce aluminum adhesion. Plastic: reduce speed and work intermittently to avoid overheating the material. A clogged belt does not abrade but only generates heat — it should be cleaned with a wire brush or replaced.

Original spare parts available with 3–5 business days shipping. Customer support in Italian available.