Bernardo HSS Bandsaw Blade 3880 x 6 x 0.65 - 14 tpi is a cutting tool for professional use available on Krollit, official Bernardo distributor since 2007.
- Measurements: 3880 x 6 x 0.65 mm
- Teeth per inch: 14
- Material: HSS
Who uses the HSS Bandsaw Blade 3880 x 6 x 0.65 - 14 tpi and for what
Mechanical workshops and tool laboratories use the HSS Bandsaw Blade 3880 x 6 x 0.65 - 14 tpi for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.
Its place in the Bernardo range
Bernardo HSS Bandsaw Blade 3880 x 6 x 0.65 - 14 tpi is part of the Bernardo range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the machine suitable for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the HSS Bandsaw Blade 3880 x 6 x 0.65 - 14 tpi for
The hss bandsaw blade 3880 x 6 x 0.65 - 14 tpi is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machine: replacement part or original tool for the indicated machine.
-
Out-of-specification materials: check machinable material and tool geometry before use.
Frequently asked questions
Which bandsaw is it compatible with?
It is specific for professional Bernardo MSB series metal bandsaws (blade stroke 3880 mm).
Check the blade stroke (closed blade length) of your saw before purchasing. The length is indicated in the machine manual or printed on the existing blade.
What is 14 TPI toothing used for?
Suitable for cutting thin sheets (<10 mm), thin-walled tubes, hardened materials.
General rule for metal: low TPI (4-6) for large solids, medium TPI (8-10) for tubular profiles, high TPI (12-14) for thin sheets and thin-walled tubes. Typical cutting speed: 30-90 m/min on mild steel.
What can be cut with a width of 6 mm?
It is suitable for contour cuts and curves, blades for small bench saws.
The width determines rigidity and the type of cut possible. For metals, a bimetallic blade (Biflex) with M42 HSS teeth on a flexible body is always required.
What does Biflex mean?
Biflex is a bimetallic blade with a flexible steel body and M42 HSS steel teeth, optimized for metal cutting.
M42 teeth (HSS-Co8 with a high percentage of cobalt) resist temperatures up to 600 °C and maintain sharpness on hardened steels and hard alloys. The bimetallic structure combines body flexibility and tooth hardness.
How is it tensioned correctly?
Typical tension for metal blades: 25,000-35,000 PSI. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; too tight blades break due to mechanical tension. Always consult the saw manual for the exact value. Check cold after 5 minutes of work.
