{"product_id":"bernardo-ad-260-400v","title":"Bernardo AD 260 Planer and Thicknesser – 400V","description":"\u003cp\u003eThe Bernardo AD 260 jointer and thicknesser offers a planing width of 250 mm, a jointer table of 1,090 mm, a Ø 75 mm cutter block with 3 HSS knives at 4,000 rpm, a maximum thicknessing height of 185 mm, a feed rate of 4.8 m\/min, and a 2.0 kW three-phase 400V motor. Manufactured in Austria, it is distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointer table (length):\u003c\/strong\u003e 1,090 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 185 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 75 mm – 3 HSS knives – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 4.8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.0 kW S1 \/ 2.8 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 173 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the AD 260 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AD 260 – 400V is the entry-professional combination planer for artisans and carpenters with planing needs up to 250 mm. At 173 kg, it is significantly more manageable than the AD 310 (295 kg), making it suitable for workshops with limited space or those needing to occasionally move the machine. The 2.0 kW three-phase motor is sized for processing soft and medium woods in a professional cycle: for hard oak or ash, the reduced feed rate of 4.8 m\/min compared to the AD 310's 6 m\/min requires more conservative passes. In Krollit's customer workshops, it is predominantly used for the production of small and medium-sized solid wood furniture, where the 250 mm width covers the vast majority of processed boards.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe AD 260 – 400V is positioned between the ADM 260 – 230V (same width, single-phase, for workshops without three-phase power) and the AD 310 – 400V (310 mm width, larger cutter block, for those needing more capacity). The choice between AD 260 and AD 310 depends almost exclusively on the maximum width of the workpieces: if 90% of the boards do not exceed 250 mm, the AD 260 is sufficient and costs less. If you frequently work on panels between 250 and 310 mm, the AD 310 avoids having to split the pieces.\u003c\/p\u003e\n\u003ch3\u003eLogistics and Krollit support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo AD 260 – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eRequires 400V three-phase power: not always available in home workshops. For hobby use, consider the ADM 260 – 230V single-phase version.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall carpentry \/ artisan (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e250 mm width covers most solid wood pieces. The 173 kg offers stability without a special foundation and allows repositioning in the workshop.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eNot indicated\u003c\/td\u003e\n\u003ctd\u003eThe 2.0 kW S1 motor is not sized for prolonged industrial cycles on hardwoods. Consider the AD 310 or ADM 300 with helical cutter block.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e processing pieces over 250 mm wide (consider AD 310); intensive production on hardwoods like oak or ash for more than 4 continuous hours; workshops with only single-phase 230V power (choose ADM 260 – 230V).\u003c\/p\u003e\n\u003ch3\u003eJointer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e835 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e3 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e715 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknessing table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e4.8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.0 kW (2.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.8 kW (3.8 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,150 × 800 × 1,000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e173 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eCutter guard, switch with undervoltage release, anti-restart lockout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 mounted HSS knives\u003c\/li\u003e\n\u003cli\u003eKnife setting jig\u003c\/li\u003e\n\u003cli\u003eSafety push stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AD 260 – 400V and ADM 260 – 230V?\u003c\/summary\u003e\n\u003cp\u003eThe AD 260 – 400V requires 400V three-phase power and has a feed rate of 4.8 m\/min. The ADM 260 – 230V works with a standard domestic single-phase socket and is equipped with cast iron tables with sound-absorbing lips and an integrated motor brake. For workshops with a three-phase system, the AD 260 – 400V is preferable for its smoother motor torque; for workshops or laboratories with only a 230V socket, the ADM 260 – 230V is the only practical choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the AD 260 also work with hardwoods like oak or walnut?\u003c\/summary\u003e\n\u003cp\u003eYes, with due care. For hardwoods (oak, walnut, ash), it is advisable to reduce the depth of cut to 1-1.5 mm for jointing and 1 mm for thicknessing, and ensure that the HSS knives are sharp. The 2.0 kW S1 motor is sized for intermittent work cycles on hardwoods: for intensive production on oak for more than 3-4 continuous hours, consider the AD 310 (3.0 kW) or the ADM 300.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should HSS knives be replaced?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (3-5 hours\/day), the 3 HSS knives require sharpening every 2-4 weeks for softwoods, every 1-2 weeks for hardwoods. Knives are available as original Bernardo spare parts from Krollit stock with 3-5 business day shipping. The included setting jig ensures correct positioning after each replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat dust collector is compatible with the AD 260?\u003c\/summary\u003e\n\u003cp\u003eThe dust extraction port is Ø 100 mm, compatible with most professional-grade woodworking dust collectors. The Bernardo DC 300 (400V, flow rate 1,200 m³\/h) is the recommended solution for continuous use. For workshops with limited space, the mobile Bernardo DC 300 integrates easily without a fixed system.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed to install the AD 260?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,150 × 800 × 1,000 mm. For workpiece handling, a clear space of at least 2 m in front and behind is needed, for an operating area of approximately 5 × 1.2 m. At 173 kg, it can be moved with a manual pallet truck on a flat floor. Delivery is on a secured pallet.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50623941869896,"sku":"08-1052","price":1425.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_AD_260_con_tavoli_in_ghisa.png?v=1760693106","url":"https:\/\/www.krollit.com\/products\/bernardo-ad-260-400v","provider":"Krollit","version":"1.0","type":"link"}