{"product_id":"bernardo-ad-260-s-400v","title":"Bernardo AD 260 S - 400V Planer Thicknesser with Spiral Cutterblock","description":"\u003cp\u003eThe Bernardo AD 260 S – 400V jointer and thicknesser offers a planing width of 250 mm, a jointer table of 1,090 mm, a spiral cutterblock Ø 75 mm with 24 TCT inserts at 4,000 rpm, a maximum thicknessing height of 185 mm, a feed rate of 4.8 m\/min, and a 2.0 kW three-phase 400V motor. Noise reduction up to 50%. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 75 mm – 24 TCT inserts – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 185 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknesser feed rate:\u003c\/strong\u003e 4.8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.0 kW S1 \/ 2.8 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 173 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the AD 260 S – 400V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AD 260 S – 400V is the spiral cutterblock version of the AD 260 in a three-phase configuration: for those who already have a three-phase system in their workshop and are willing to invest slightly more than the standard AD 260 HSS to eliminate knife sharpening from routine maintenance. The 2.0 kW three-phase motor offers a smoother starting torque than the single-phase version, with lower absorption peaks on the power line. In Krollit customers' workshops, it is chosen by joinery shops that work long shifts on mixed woods, where the versatility of TCT inserts on any type of wood, from softwoods to hardwoods, reduces machine downtime for maintenance.\u003c\/p\u003e\n\u003ch3\u003eAD 260 S – 400V vs AD 260 S – 230V: when to choose three-phase\u003c\/h3\u003e\n\u003cp\u003eThe two versions have identical technical specifications (same width, same cutterblock, same weight). The difference is exclusively in the power supply: the 400V three-phase offers more uniform motor torque under load and lower peak absorption, appreciable advantages in prolonged work cycles on hardwoods. For those with available three-phase power, the 400V is the natural choice; for those without three-phase power, the 230V is the corresponding version.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho the Bernardo AD 260 S – 400V is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eRequires a 400V three-phase system. For hobby use without three-phase, prefer the 230V version. The TCT cutterblock is also appreciated in occasional use due to almost no maintenance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor workshops with 400V three-phase that want to eliminate sharpening from their routine. On mixed woods, TCT offers consistent quality without adapting maintenance frequency to the type of wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eFor intensive cycles, consider the ADM 260 S – 400V with superior construction. The AD 260 S – 400V is suitable for shifts up to 6-7 hours on medium woods.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without a three-phase system (choose AD 260 S – 230V); pieces over 250 mm wide; intensive production on very hard woods over 7 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eJointer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e835 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e24 pcs reversible (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e715 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e4.8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.0 kW (2.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.8 kW (3.8 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,150 × 800 × 1,000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 173 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, anti-kickback rollers, cutterblock guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 24 TCT inserts installed\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003ePush stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhy choose the 400V version over the 230V?\u003c\/summary\u003e\n\u003cp\u003eWith an available three-phase system, the 400V version offers more uniform motor torque under load, fewer cutterblock speed fluctuations during passes on hardwoods, and lower peak absorption on the line. In practice: less interference with other users of the system during startup, more linear performance in intensive work. If three-phase is not available, the 230V version is the only viable option.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the 24 TCT inserts on the AD 260 S the same as on the AD 310 S?\u003c\/summary\u003e\n\u003cp\u003eNo. The AD 260 S uses a Ø 75 mm cutterblock with 24 TCT inserts; the AD 310 S uses a Ø 95 mm cutterblock with 52 TCT inserts. The inserts are not interchangeable between the two models. However, the geometry of the inserts is standardized: the TCT spare parts available from Krollit are compatible with the respective cutterblock of each model.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is the maintenance of TCT inserts managed?\u003c\/summary\u003e\n\u003cp\u003eEach insert has 4 cutting edges. When the surface quality noticeably declines, the insert is rotated 90° with an hex key: a 2-minute operation, no special tools, no need for sharpening. Complete replacement of the insert occurs when all 4 cutting edges are worn out. With 24 inserts on the cutterblock, they are rarely replaced all at once: maintenance is progressive, insert by insert, without ever stopping production for an entire day.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the AD 260 S work well on MDF and panels with glue?\u003c\/summary\u003e\n\u003cp\u003eYes, much better than HSS knives. The TCT carbide inserts resist the abrasive resins of MDF much longer than HSS high-speed steel. On MDF, the frequency of insert rotation may increase compared to solid wood, but it remains significantly lower than the frequency of HSS sharpening. For production mainly on MDF or particleboard, the version with a TCT spiral cutterblock is the correct choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,150 × 800 × 1,000 mm. For handling workpieces, at least 1.8 m of free space is needed in front and behind. At 173 kg, it can be moved with a manual pallet jack.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692574740808,"sku":"08-1054","price":1752.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_AD_260_S_Pialla_filo_e_spessore_250_mm_con_albero_a_spirale_400_V.jpg?v=1757520445","url":"https:\/\/www.krollit.com\/products\/bernardo-ad-260-s-400v","provider":"Krollit","version":"1.0","type":"link"}