{"product_id":"seghe-a-nastro-bernardo-hbs-275-vario-400v","title":"Bernardo HBS 275 Vario Horizontal Bandsaw – 400V, cast iron frame, 90° cutting capacity Ø 225 mm, variable speed 20-90 m\/min","description":"\u003cp\u003eThe Bernardo HBS 275 Vario \/ 400V horizontal band saw offers a round cutting capacity of 225 mm at 90° and 100 mm at 60°, square cutting of 200×200 mm at 90°, flat cutting of 245×150 mm, a solid cast iron frame, an arm inclinable up to 60°, continuously variable cutting speed of 20-90 m\/min, a 1.5 kW motor (S1 100%) at 400V three-phase, a blade of 2,480×27×0.9 mm, a quick-release cast iron vice, a hydraulic cylinder for progressive descent, a 100 W cooling device, and automatic shutdown at the end of the cut. Weight 200 kg. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound cutting capacity at 90°:\u003c\/strong\u003e Ø 225 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare cutting capacity at 90°:\u003c\/strong\u003e 200 × 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound cutting capacity at 45°:\u003c\/strong\u003e Ø 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound cutting capacity at 60°:\u003c\/strong\u003e Ø 100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting speed:\u003c\/strong\u003e 20 – 90 m\/min continuously variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 kW S1 100% – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 200 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the HBS 275 Vario and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo HBS 275 Vario is a horizontal band saw for precision cutting of pipes, profiles, solid materials, and non-ferrous metals. The solid cast iron frame (vs. welded sheet metal frames of entry-level saws) offers stability and vibration reduction during cutting, a critical feature for the quality of the cut finish and blade life. The continuously variable speed of 20-90 m\/min allows adaptation to the material: low speed for hard steels and stainless steel, high speed for soft metals and aluminum. The arm inclinable up to 60° handles angular cuts on pipes and profiles. The hydraulic cylinder for progressive descent (instead of free fall of the arm) controls the cutting pressure, reducing stress on the blade and improving cut quality. The 100 W cooling device and automatic shutdown at the end of the cut make the machine suitable for repetitive cuts without continuous supervision. In Krollit customers' workshops, it is chosen by metal fabricators, mechanical workshops with continuous saw use, professional blacksmiths, and metalworking shops.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe HBS 275 Vario is Bernardo's mid-range professional horizontal band saw. Below it is the Vario 150 T (portable band saw, 150 mm round capacity, 32 kg weight, 230V single-phase power supply) for use on construction sites or workshops without three-phase power. Above it in the Bernardo range are semi-automatic and automatic band saws with motorized feed and clamping, sized for industrial series production. The HBS 275 Vario stands out for its quality\/price ratio: professional features (cast iron frame, variable speed, hydraulic cylinder, cooling device) in a compact format suitable for medium-sized workshops. For series production on repetitive cuts, consider semi-automatic saws with hydraulic material clamping; for daily craft-industrial use, the HBS 275 Vario is correctly sized.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). At 200 kg, it requires a pallet jack or two careful people for unloading and handling. The steel base is included. Original Bernardo blades, blade guide bearings, and spare accessories are available from stock with shipping in 3-5 business days. Customer support in Italian is available.\u003c\/p\u003e\n\n\u003ch3\u003eWho the HBS 275 Vario is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate metal hobbyist\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eMachine sized for professional use. For occasional hobby use, the Vario 150 T (portable, single-phase) is more practical and less expensive.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal fabrication \/ mechanical workshop\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e225 mm round and 200×200 mm square capacity cover most standard fabrication profiles. Variable speed and hydraulic cylinder offer professional cutting quality.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional blacksmith \/ pipe and profile processing\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eArm inclinable up to 60° and quick-release cast iron vice speed up repetitive angular cuts. Cast iron frame provides stability for continuous daily use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e cutting rounds over 225 mm in diameter (consider higher capacity band saws); high-volume series production (consider semi-automatic or automatic saws); workshops without a 400V three-phase line (consider Vario 150 T single-phase); use on construction sites or frequent moving (the Vario 150 T is designed for portability).\u003c\/p\u003e\n\n\u003ch3\u003eCutting capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound at 90°\u003c\/td\u003e\n\u003ctd\u003eØ 225 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare at 90°\u003c\/td\u003e\n\u003ctd\u003e200 × 200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat at 90°\u003c\/td\u003e\n\u003ctd\u003e245 × 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound at 45°\u003c\/td\u003e\n\u003ctd\u003eØ 160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare at 45°\u003c\/td\u003e\n\u003ctd\u003e160 × 160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound at 60°\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare at 60°\u003c\/td\u003e\n\u003ctd\u003e100 × 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eBlade and speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade dimensions\u003c\/td\u003e\n\u003ctd\u003e2,480 × 27 × 0.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting speed\u003c\/td\u003e\n\u003ctd\u003e20 – 90 m\/min continuously variable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and cooling\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 100%\u003c\/td\u003e\n\u003ctd\u003e1.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoolant pump\u003c\/td\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eConstruction features\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eSolid cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVice\u003c\/td\u003e\n\u003ctd\u003eQuick-release cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescent\u003c\/td\u003e\n\u003ctd\u003eContinuous hydraulic cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade guide\u003c\/td\u003e\n\u003ctd\u003eAdjustable ball bearings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic shutdown\u003c\/td\u003e\n\u003ctd\u003eAt end of cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking height\u003c\/td\u003e\n\u003ctd\u003e910 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,430 × 720 × 1,700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e200 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo HBS 275 Vario \/ 400 V band saw\u003c\/li\u003e\n\u003cli\u003eMounted band blade\u003c\/li\u003e\n\u003cli\u003eQuick-release cast iron vice\u003c\/li\u003e\n\u003cli\u003eBlade tension gauge\u003c\/li\u003e\n\u003cli\u003eWorkpiece fence\u003c\/li\u003e\n\u003cli\u003eSteel base\u003c\/li\u003e\n\u003cli\u003e100 W cooling device\u003c\/li\u003e\n\u003cli\u003eHydraulic cylinder\u003c\/li\u003e\n\u003cli\u003eMotor protection switch\u003c\/li\u003e\n\u003cli\u003eAutomatic shutdown at end of cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the 20-90 m\/min variable speed really useful?\u003c\/summary\u003e\n\u003cp\u003eYes, unequivocally. Different speeds are optimal for different materials: 20-30 m\/min for stainless steel and hardened steels, 40-60 m\/min for mild steels, 70-90 m\/min for aluminum and brass.\u003c\/p\u003e\n\u003cp\u003eCorrect cutting speed is critical for blade life and cut quality. Speeds that are too high on hard steels overheat the blade and reduce its life; speeds that are too low on soft metals unnecessarily extend cutting times. Continuous adjustment (vs. fixed presets) allows finding the optimal value for each specific material.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the cooling device mandatory?\u003c\/summary\u003e\n\u003cp\u003eFor intensive cutting on hard steels, yes. The coolant reduces friction and blade temperature, extending its life and improving cut quality. For occasional cuts on soft metals, dry cutting is possible.\u003c\/p\u003e\n\u003cp\u003eThe 100 W coolant pump is included in the standard equipment. The coolant (oil-water emulsion) is not supplied by Krollit but is available from standard industrial suppliers. For intensive professional use, coolant is recommended in all cases: the difference in blade life is significant.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eDoes the arm truly incline up to 60° without compromise?\u003c\/summary\u003e\n\u003cp\u003eYes, but the cutting capacity is proportionally reduced. At 90° (straight cut), round Ø 225 mm; at 45°, round Ø 160 mm; at 60°, round Ø 100 mm. Capacities are declared by Bernardo for each angle.\u003c\/p\u003e\n\u003cp\u003eArm inclination for angular cuts is a standard function of horizontal band saws. The capacity reduction is geometric: at 60°, only a smaller portion of the round is under the blade. For angular cuts on large pieces, it is necessary to consider the reduced capacities in advance. For predominantly angular cuts on large pieces, consider horizontal band saws with greater capacity.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow long do blades last in standard use?\u003c\/summary\u003e\n\u003cp\u003eOriginal Bernardo blades typically last 50-200 hours of actual cutting depending on the material (hard steels wear more quickly). For daily artisanal use, a typical blade lasts 2-6 months.\u003c\/p\u003e\n\u003cp\u003eBlade life depends on many factors: material cut, set speed, use of coolant, required cut quality. Original Bernardo replacement blades (2,480×27×0.9 mm) are available from stock with shipping in 3-5 business days. For intensive use, it is advisable to keep a stock of blades.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the steel base really included?\u003c\/summary\u003e\n\u003cp\u003eYes. The base is part of the standard equipment, unlike many entry-level band saws where it must be purchased separately.\u003c\/p\u003e\n\u003cp\u003eThe integrated base brings the saw to a working height of 910 mm, ergonomic for standing operators. For workshops with dedicated workbenches, it is possible to remove the base and install the saw directly on the bench, but the standard configuration with the base is the most ergonomic for professional use.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50693149196616,"sku":"04-1697A","price":3432.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_Sega_a_nastro_orizzontale_HBS_275_Vario_con_velocit_variabile.jpg?v=1758727871","url":"https:\/\/www.krollit.com\/products\/bernardo-bandsaws-hbs-275-vario-400v","provider":"Krollit","version":"1.0","type":"link"}