{"product_id":"bernardo-trapano-colonna-sb-40-profi","title":"Bernardo SB 40 Profi Pillar Drill – Ø 40 mm, Vario-drive 400V","description":"\u003cp\u003eThe Bernardo SB 40 Profi pillar drill drills up to Ø 40 mm in steel, with a continuous Vario-drive system (90–1,455 rpm), MT 4 taper, tiltable table ±50°, spindle travel 160 mm, automatic feed 0.1\/0.2\/0.3 mm\/rev, 1.0\/1.5 kW three-phase 400V motor. Weight approx. 380 kg. Made in Austria, distributed in Italy by Krollit as official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax drilling capacity:\u003c\/strong\u003e Ø 40 mm (steel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed system:\u003c\/strong\u003e Continuous Vario-drive 90 – 1,455 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMorse taper chuck:\u003c\/strong\u003e MT 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic feed:\u003c\/strong\u003e 0.1 \/ 0.2 \/ 0.3 mm\/rev\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTiltable table:\u003c\/strong\u003e ±50°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle travel:\u003c\/strong\u003e 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.0\/1.5 kW – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 380 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the SB 40 Profi and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo SB 40 Profi is the flagship professional pillar drill in the Bernardo range: with its Vario-drive system that continuously adjusts speed without changing belts (90–1,455 rpm), three-step selectable automatic feed (0.1\/0.2\/0.3 mm\/rev), and ±50° tiltable table, it's the machine for workshops that regularly drill various materials — from aluminum to structural steel — and want to switch between parameters in seconds instead of minutes. The MT 4 taper allows mounting large drill bits and special tools without adapters. At 380 kg, it has the necessary mass for heavy-duty work without vibrations. In Krollit customers' workshops, it is used by mechanical workshops, equipment manufacturers, and metal frame fabricators.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Bernardo SB 40 Profi for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eProfessional machine weighing 380 kg with three-phase 400V. For hobby use, consider lighter single-phase pillar drills.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional mechanical workshop\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eVario-drive with no belt changes, automatic feed, MT 4, ±50° table: the drill for those who regularly drill various materials with maximum operational flexibility.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial production\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eThe automatic feed of 0.1\/0.2\/0.3 mm\/rev is crucial for serial drilling with consistent quality without operator fatigue.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without three-phase 400V; occasional hobby use; those who do not need Ø 40 mm (a smaller drill is sufficient and less expensive).\u003c\/p\u003e\n\n\u003ch3\u003eWorking capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax drilling capacity (steel)\u003c\/td\u003e\n\u003ctd\u003eØ 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeyless chuck\u003c\/td\u003e\n\u003ctd\u003e1 – 16 mm \/ B16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMorse taper chuck\u003c\/td\u003e\n\u003ctd\u003eMT 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle travel\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – column distance\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – table distance\u003c\/td\u003e\n\u003ctd\u003emax. 590 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle – base distance\u003c\/td\u003e\n\u003ctd\u003e1,155 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpeed and feeds\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed system\u003c\/td\u003e\n\u003ctd\u003eVario-drive (continuous adjustment)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle speed\u003c\/td\u003e\n\u003ctd\u003e90 – 1,455 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic spindle feed\u003c\/td\u003e\n\u003ctd\u003e0.1 \/ 0.2 \/ 0.3 mm\/rev\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTable and base\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTiltable table\u003c\/td\u003e\n\u003ctd\u003e−50° \/ +50°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions \/ T-slots\u003c\/td\u003e\n\u003ctd\u003e505 × 425 mm \/ 14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColumn diameter\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase plate\u003c\/td\u003e\n\u003ctd\u003e360 × 370 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e1.0 \/ 1.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e500 × 930 × 1,870 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 380 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\u003cp\u003eBernardo shipping: 5–9 working days (7 days for Southern Italy). Original spare parts available with 3–5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the Vario-drive system and why is it an advantage over belt changes?\u003c\/summary\u003e\n\u003cp\u003eThe Vario-drive continuously adjusts the spindle speed via a mechanical variator, without having to stop the machine, open the cover, and move the belt between pulleys. The practical result: to go from 200 rpm (large drilling in steel) to 1,200 rpm (small drilling in aluminum), you turn a knob in 3 seconds instead of losing 2–3 minutes of downtime. In a workshop that drills various materials every day, the time savings and operating comfort are significant.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the automatic feed of 0.1\/0.2\/0.3 mm\/rev for?\u003c\/summary\u003e\n\u003cp\u003eAutomatic feed pushes the spindle down at a fixed rate per spindle revolution, regardless of the force applied by the operator. For serial drilling, it ensures consistent quality (same penetration rate for each hole), reduces fatigue for deep drilling, and is optimal for hard materials where uncontrolled feed can cause drill bit breakage. The three steps (0.1\/0.2\/0.3 mm\/rev) cover everything from fine finishing to rapid roughing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the ±50° tiltable table also used for angled milling?\u003c\/summary\u003e\n\u003cp\u003eThe SB 40 Profi is a pillar drill — it is not designed for milling with end mills. The ±50° tiltable table is used for angled drilling (holes not perpendicular to the surface), typical in metalworking and equipment construction. For actual milling, the Bernardo BFM\/WFM range of milling machines is used.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat drill bits can be mounted on the MT 4?\u003c\/summary\u003e\n\u003cp\u003eThe MT 4 taper is the standard for large diameter drill bits, taper reductions (MT 4 → MT 3, MT 2) and special tools such as drill bushes, reamers, and hole saws. With the MT 4 → B16 reduction, the keyless chuck for drill bits up to Ø 16 mm can be mounted.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 500 × 930 × 1,870 mm. At 380 kg, it requires an adequate floor for delivery. The base of 360 × 370 mm is compact: the drill can be easily installed even in workshops with limited space.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50693168857416,"sku":"01-1175XL","price":5340.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Trapano_a_colonna_Bernardo_SB_40_Profi_con_avanzamento_automatico.png?v=1758120334","url":"https:\/\/www.krollit.com\/products\/bernardo-drill-pillar-sb-40-profi","provider":"Krollit","version":"1.0","type":"link"}