{"product_id":"bernardo-pressa-idraulica-at-1020-100","title":"Bernardo AT 1020-100 universal hydraulic industrial press – 100 tons, 1,020 mm width, 680 mm working height, 7.5 kW motor","description":"\u003cp\u003eThe Bernardo AT 1020-100 universal hydraulic industrial press offers 100 tons of pressing force, a useful working width of 1,020 mm, a useful height of 680 mm, a lower table of 500×1,020 mm with a Ø 100 mm through-hole, a piston stroke of 300 mm, an advance speed of 8 mm\/sec, a working speed of 5 mm\/sec, a return speed of 10 mm\/sec, a 7.5 kW motor, and a solid cast iron structure. Weight 2,800 kg. Suitable for molding, bending, straightening, and assembly of tall workpieces. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressing force:\u003c\/strong\u003e 100 tons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseful working width:\u003c\/strong\u003e 1,020 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseful working height:\u003c\/strong\u003e 680 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower table:\u003c\/strong\u003e 500 × 1,020 mm with Ø 100 mm through-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston stroke:\u003c\/strong\u003e 300 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 7.5 kW – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 2,800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the AT 1020-100 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AT 1020-100 is the universal low-force press in the AT family, sized for operations requiring generous useful height (680 mm, the highest in the family) but not maximum forces. The 680 mm useful height is the highest value among Bernardo AP\/AT universal presses: it allows for processing of tall molds and vertical components that AP presses with 275 mm cannot accommodate, and even the AT 1520-150 with 610 mm cannot reach. The 100 tons are sized for tall molds that require distributed, not concentrated, pressures. In Krollit customer workshops, it is chosen by mechanical workshops with deep molds, manufacturers of vertical components (cylinders, tall shafts), and prototyping laboratories that alternate different molds.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe AT 1020-100 is the entry-level model of Bernardo's AT family. Above it are the AT 1020-150 (same width, 150 t, 610 mm height) for more force but less height, and the AT 1520-150 (1,520 mm width, 150 t, 610 mm height) for wider workpieces. A distinctive feature of the AT 1020-100: it has the most extended useful height in the family (680 mm vs 610 mm for other ATs). This design choice makes sense: with lower tonnage, the structure can be taller without compromising stability. For workshops that work with very tall molds but do not require 150 tons, the AT 1020-100 is the most targeted choice in the range. For those who want more force and accept 70 mm less height, they can move up to the AT 1020-150 or AT 1520-150.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to Southern Italy). At 2,800 kg, it requires a crane or forklift of adequate capacity. Dimensions 2,150 × 1,400 × 2,480 mm: check workshop access. Original Bernardo tools, spare parts, and accessories available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the AT 1020-100 for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eIndustrial machine with a weight of 2,800 kg and requiring a 400V three-phase line. Exclusively professional application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorkshop with deep and tall molds\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eUseful height of 680 mm is the most extended in the AT family. Allows molding on tall vertical components that would require specialized industrial presses.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer of vertical components\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor cylinders, tall shafts, vertical assemblies. 100 tons are adequate for distributed pressures on tall molds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e applications requiring over 100 tons (consider AT 1020-150 at 150 t); flat machining that does not utilize the 680 mm height (the AP 1020 is more economical); parts wider than 1,020 mm (consider AT 1520-150); workshops without an industrial 400V three-phase line.\u003c\/p\u003e\n\n\u003ch3\u003ePressing capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax pressing force\u003c\/td\u003e\n\u003ctd\u003e100 tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston stroke\u003c\/td\u003e\n\u003ctd\u003e300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful working width\u003c\/td\u003e\n\u003ctd\u003e1,020 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful working height\u003c\/td\u003e\n\u003ctd\u003e680 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTable\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower table\u003c\/td\u003e\n\u003ctd\u003e500 × 1,020 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable through-hole\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpeed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdvance\u003c\/td\u003e\n\u003ctd\u003e8 mm\/sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork\u003c\/td\u003e\n\u003ctd\u003e5 mm\/sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn\u003c\/td\u003e\n\u003ctd\u003e10 mm\/sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e7.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e2,150 × 1,400 × 2,480 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 2,800 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStructure material\u003c\/td\u003e\n\u003ctd\u003eSolid cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo AT 1020-100 universal hydraulic press\u003c\/li\u003e\n\u003cli\u003eLower table with Ø 100 mm through-hole\u003c\/li\u003e\n\u003cli\u003eComplete hydraulic system with integrated pump\u003c\/li\u003e\n\u003cli\u003eUniversal safety devices\u003c\/li\u003e\n\u003cli\u003eBasic tool set for assembly and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhy does the AT 1020-100 have a useful height of 680 mm, while the AT 1020-150 only has 610 mm?\u003c\/summary\u003e\n\u003cp\u003eWith lower tonnage (100 vs 150 t), the structure can be designed taller without compromising overall stability. It's a deliberate trade-off: less force but more vertical space.\u003c\/p\u003e\n\u003cp\u003eThe 50 fewer tons allow for a less massive but taller structure. For workshops that prioritize mold height, this choice is strategic. Workshops that require maximum force with intermediate height choose the AT 1020-150. Those who want both characteristics at their maximum must switch to dedicated industrial presses outside the universal AP\/AT range.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the practical difference with the AP 1020-100 (100 t, 1,020 mm width)?\u003c\/summary\u003e\n\u003cp\u003eThe AP 1020-100 does not exist in the standard Bernardo range: for 100 t and 1,020 mm width, only the AT version with 680 mm useful height exists. For 100 t in AP format, the AP 1520-100 (1,520 mm width, 325 mm height) is needed.\u003c\/p\u003e\n\u003cp\u003eThe AP range is optimized for limited heights (275-325 mm), the AT range for extended heights (610-680 mm). Bernardo does not offer all possible combinations: for each width-tonnage configuration, it chooses the useful height consistent with typical use.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs the 7.5 kW motor sufficient for continuous use?\u003c\/summary\u003e\n\u003cp\u003eYes. The motor is sized for continuous cycles with an advance speed of 8 mm\/sec. For series production with standard cycle times, the AT 1020-100 operates without thermal limitations.\u003c\/p\u003e\n\u003cp\u003eThe 7.5 kW power consumption is manageable by standard industrial control panels without special sizing. For workshops with limited available power, the AT 1020-100 is the most accessible choice in the AT family (the AT 1020-150 requires 11 kW).\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I work with components larger than 500×1,020 mm?\u003c\/summary\u003e\n\u003cp\u003eOnly if the part fits on the table in a different orientation or if the pressing is concentrated in an area that falls within the table. For consistently larger parts, consider the AT 1520-150 (600×1,520 mm table).\u003c\/p\u003e\n\u003cp\u003eThe lower table of the AT 1020-100 is 500×1,020 mm: the part must rest on this surface for pressing. Wider parts can overhang laterally if they do not require pressure in that area. For series production on larger parts, it is recommended to switch to a properly sized press.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow much operational space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine dimensions are 2,150 × 1,400 × 2,480 mm. For workpiece handling, an operational area of at least 3.5 × 3 m with a minimum ceiling height of 3 m is required.\u003c\/p\u003e\n\u003cp\u003eThe height of 2,480 mm allows installation in workshops with standard 3-meter ceilings. The weight of 2,800 kg is the lowest in the AT family, facilitating initial installation and handling.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50693136810312,"sku":"06-2110","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pressa_industriale_idraulica_Bernardo_AT_1020-100_100_ton.jpg?v=1758116819","url":"https:\/\/www.krollit.com\/products\/bernardo-press-hydraulic-at-1020-100","provider":"Krollit","version":"1.0","type":"link"}