{"product_id":"bernardo-pt-310s-spirale-400v","title":"Bernardo PT 310 S Jointer and Thicknesser - 400V with Spiral Cutterblock","description":"\u003cp\u003eThe Bernardo PT 310 S – 400V jointer-planer offers a planing width of 310 mm, a 1,300 mm jointer table, a spiral cutterblock Ø 75 mm with 30 TCT inserts at 4,000 rpm, a maximum thicknessing height of 180 mm, a feed rate of 8 m\/min, and a 2.2 kW three-phase 400V motor. Noise reduction up to 50%, and cutting edge life up to 20 times longer than HSS knives. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 310 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 75 mm – 30 TCT inserts – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 180 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 kW S1 \/ 3.0 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 180 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the PT 310 S and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo PT 310 S is the version with a TCT spiral cutterblock of the PT 310: same compact structure (180 kg), same workshop format, but with TCT technology that almost completely eliminates cutter maintenance. For those who want 310 mm width in a light format and want to add the advantage of TCT without moving to heavier machines like the AD 310 S (295 kg). The 8 m\/min feed rate, higher than the AD 310 S (6 m\/min), makes it more productive for roughing softwoods. In Krollit customers' workshops, it is chosen by carpenters who value the combination of lightness + minimal maintenance.\u003c\/p\u003e\n\u003ch3\u003ePT 310 S vs AD 310 S: the choice between lightness and mass\u003c\/h3\u003e\n\u003cp\u003eSame width (310 mm), same TCT cutterblock, but different structure. The PT 310 S weighs 180 kg and has a 1,300 mm jointer table; the AD 310 S weighs 295 kg with a 1,610 mm table. The mass of the AD 310 S provides more stability on large and heavy pieces; the PT 310 S is more manageable and takes up less space. The thicknessing height is identical (180 mm for the PT 310 S vs 225 mm for the AD 310 S); those who work pieces up to 225 mm high must choose the AD 310 S.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days for Southern Italy). Original Bernardo spare parts available from stock with 3-5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo PT 310 S – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThree-phase 400V required. TCT is also appreciated in hobby use for minimal maintenance. For pure hobby use, consider single-phase versions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ artisan (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e310 mm with TCT in a 180 kg format: the optimal combination for workshops with limited space that want to eliminate sharpening from their routine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eFor intensive cycles on large pieces, consider the AD 310 S (295 kg, more stable) or the ADM 300 with helical roller. The PT 310 S is suitable for shifts up to 6 hours.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e pieces with thicknessing height over 180 mm (consider AD 310 S with 225 mm); workshops without three-phase 400V; production of very heavy pieces requiring the structural mass of the AD 310 S.\u003c\/p\u003e\n\u003ch3\u003eJointer (surface planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e990 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e30 pcs reversible (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1,110 × 130 mm – prismatic guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence inclination\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e305 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknessing table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction connection\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,300 × 900 × 1,180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 180 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, planer cutterblock guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 30 TCT inserts installed\u003c\/li\u003e\n\u003cli\u003eSpare TCT inserts\u003c\/li\u003e\n\u003cli\u003eSafety push block\u003c\/li\u003e\n\u003cli\u003eAdjustment gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between PT 310 S and PT 310 (HSS)?\u003c\/summary\u003e\n\u003cp\u003eThe PT 310 S features a spiral cutterblock with 30 TCT inserts instead of the 3 HSS knives of the standard PT 310. Structure, weight (180 kg), dimensions, and motor (2.2 kW) are identical. TCT offers: approx. 50% noise reduction, 10-20 times longer cutting edge life, maintenance by rotating the insert without disassembly. The cost of the PT 310 S is higher but is recovered in saved maintenance in 12-18 months of professional use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the PT 310 S have the same thicknessing height as the AD 310 S?\u003c\/summary\u003e\n\u003cp\u003eNo. The PT 310 S has a maximum thicknessing height of 180 mm; the AD 310 S reaches 225 mm. If you work pieces with a height between 180 and 225 mm, the AD 310 S is necessary. For pieces up to 180 mm, the PT 310 S is sufficient and weighs 115 kg less (180 vs 295 kg).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow is maintenance of TCT inserts performed on the PT 310 S?\u003c\/summary\u003e\n\u003cp\u003eEach TCT insert has 4 cutting edges. When the surface quality decreases, rotate the insert by 90° with a hex key (2 minutes, no cutterblock disassembly). Complete replacement only occurs when all 4 cutting edges are worn. With 30 inserts, you work on 1-3 at a time, progressively, without ever stopping production for a complete replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the 8 m\/min feed rate too fast for hardwoods?\u003c\/summary\u003e\n\u003cp\u003eFor hardwoods (oak, ash) with an 8 m\/min feed rate, it is advisable to reduce the depth of cut to 1-1.5 mm to avoid motor overload and fiber tear-out. For softwoods (pine, fir), the full 8 m\/min feed rate with 2-3 mm passes is feasible without problems. TCT handles speed variations better than HSS knives on woods with difficult grain.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,300 × 900 × 1,180 mm. For handling pieces, a clear space of at least 2 m in front and behind is needed. At 180 kg, it can be moved with a hand pallet truck on a flat floor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692584997192,"sku":"08-1039","price":1922.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_PT_310_S_con_albero_a_spirale_e_inserti_TCT.png?v=1760687034","url":"https:\/\/www.krollit.com\/products\/bernardo-pt-310s-helical-400v","provider":"Krollit","version":"1.0","type":"link"}