{"product_id":"bernardo-pt-410-400v","title":"Bernardo PT 410 Planer and Thicknesser – 400V","description":"\u003cp\u003eThe Bernardo PT 410 – 400V jointer and thicknesser offers a planing width of 410 mm, a jointer table of 1,600 mm, a Ø 95 mm cutter block with 4 HSS knives at 4,000 rpm, a maximum thicknessing height of 220 mm, a feed rate of 8 m\/min, and a 3.0 kW three-phase 400V motor with integrated motor brake. Weight 340 kg. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 410 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointer table (length):\u003c\/strong\u003e 1,600 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 4 – 220 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 95 mm – 4 HSS knives – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknesser feed rate:\u003c\/strong\u003e 8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3.0 kW S1 \/ 4.2 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor brake:\u003c\/strong\u003e integrated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 340 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the PT 410 – 400V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo PT 410 – 400V is the 410 mm combination planer with HSS knives from the PT family: the same width as the AD 410 and AD 410 S, with cast iron tables and an integrated motor brake. The 8 m\/min feed rate, superior to the AD 410 (6 m\/min), makes it more productive for roughing softwoods. The integrated motor brake stops the cutter block quickly after shutdown, increasing operational safety in workshops with multiple operators. At 340 kg, it is the heaviest cast iron planer in the PT range, its mass providing stability for large and heavy workpieces. In Krollit customer workshops, it is used by window and door manufacturers and cabinet makers who process wide doors and panels in a professional cycle.\u003c\/p\u003e\n\u003ch3\u003ePT 410 vs AD 410: same format, different approach\u003c\/h3\u003e\n\u003cp\u003eSame width (410 mm), same weight (340 kg), same cast iron tables. The PT 410 has a faster feed rate (8 vs 6 m\/min), an integrated motor brake, and a slightly shorter jointer table (1,600 vs 1,685 mm). The AD 410 has 4 identical HSS knives but a longer table and a slightly different structure. For production of large workpieces, the longer table of the AD 410 is advantageous; for those who value rapid feed and the motor brake, the PT 410 is preferable.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to the South). Original Bernardo spare parts available from stock with shipping in 3-5 business days. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo PT 410 – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eHeavy professional machine (340 kg, three-phase). Oversized dimensions and cost for occasional use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e410 mm with 8 m\/min feed, motor brake and cast iron tables: the combination for those working wide pieces professionally with attention to operational safety.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eTo eliminate cutting edge maintenance, consider the PT 410 S with a TCT spiral cutter block. The PT 410 with HSS knives is suitable for shifts of up to 6-7 hours on medium hardwoods.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops without 400V three-phase; workpieces with width less than 310 mm (oversized machine); environments with access less than 1.3 m wide.\u003c\/p\u003e\n\u003ch3\u003eJointer (surface planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e920 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e4 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45° with prismatic guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e4 – 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e750 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e4.2 kW (5.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor brake\u003c\/td\u003e\n\u003ctd\u003eIntegrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e340 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eIntegrated motor brake, ON\/OFF switch with undervoltage release, cutter block guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 mounted HSS knives\u003c\/li\u003e\n\u003cli\u003eKnife setting gauge\u003c\/li\u003e\n\u003cli\u003eSafety push stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between PT 410 and PT 410 S?\u003c\/summary\u003e\n\u003cp\u003eThe PT 410 has 4 HSS knives on the Ø 95 mm cutter block. The PT 410 S has 72 TCT inserts on the same cutter block. Structure, dimensions and weight are identical. TCT offers reduced noise by approx. 50% and 10-20 times longer cutting edge life. The cost of the PT 410 S is higher; the savings in maintenance recuperate it in 12-18 months of professional full-shift use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow quickly does the integrated motor brake stop the cutter block?\u003c\/summary\u003e\n\u003cp\u003eThe motor brake stops the cutter block in a few seconds after shutdown, instead of the 30-60 seconds of natural deceleration. It is an important safety feature in workshops with multiple operators or where the operator needs to move away from the machine quickly. It significantly reduces the risk of accidental contact with the rotating cutter block after shutdown.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should the 4 HSS knives be replaced?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (6-8 hours\/day) on medium hardwoods, the 4 HSS knives require sharpening every 2-3 weeks. Original Bernardo spare parts are available from Krollit stock with shipping in 3-5 business days.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat dust extractor is needed for the PT 410?\u003c\/summary\u003e\n\u003cp\u003eThe dust extraction port is Ø 100 mm. For a working width of 410 mm, a dust extractor with a minimum air flow of 800-1,000 m³\/h is recommended. The Bernardo DC 600 (400V) is the recommended solution for continuous professional use at this width.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eWith a working width of 410 mm, clear space of at least 2.5-3 m in front of and behind the machine is needed. At 340 kg, delivery requires equipped platform: check access (minimum door width 1.3 m, 1.4 m height with machine on pallet truck).\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692626645320,"sku":"08-1061","price":3229.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_PT_410_con_tavoli_in_ghisa.jpg?v=1760543631","url":"https:\/\/www.krollit.com\/products\/bernardo-pt-410-400v","provider":"Krollit","version":"1.0","type":"link"}