Krollit SKIP Bandsaw Blade 3670mm - 6 x 0.65mm 4Tpi is a cutting tool for professional use available on Krollit, official Krollit distributor since 2007.
- Vendor: Krollit
- Model: SKIP Bandsaw Blade 3670mm - 6 x 0.65mm 4Tpi
- Official Bernardo distributor since 2007
- Shipping from Krollit warehouse
Who uses the SKIP Bandsaw Blade 3670mm - 6 x 0.65mm 4Tpi and for what
Mechanical workshops and tool laboratories use the SKIP Bandsaw Blade 3670mm - 6 x 0.65mm 4Tpi for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.
Its place in the Krollit range
Krollit SKIP Bandsaw Blade 3670mm - 6 x 0.65mm 4Tpi is part of the Krollit cutting tools range, distributed in Italy by Krollit since 2007. The Krollit range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Krollit catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Shipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who the SKIP Bandsaw Blade 3670mm - 6 x 0.65mm 4Tpi is for
The skip bandsaw blade 3670mm - 6 x 0.65mm 4tpi is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machine: replacement or original tool for the indicated machine.
-
Out-of-spec materials: check machinable material and tool geometry before use.
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specific for the Laguna 18|BX bandsaw (with 3670 mm blade stroke).
Check the blade stroke (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded on the existing blade.
What is 4 TPI used for?
Suitable for general purpose cutting on dry and hard wood, thicknesses 10-25 mm.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a 6 mm width?
It is suitable for curved and contour cuts with minimum radii (Ø 3-10 mm). The SKIP tooth has a deep gullet for chip evacuation: excellent for green and fresh wood.
The width determines the minimum cutting radius: for wood with a width of 6 mm, the approximate radius is 30 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, burns occur, or more pressure is required. Bandsaw blades are not sharpened: they are replaced.
Wear indicators: burning of the wood during cutting, deviation of the cutting line (the blade "strays"), altered noise, presence of smoke. Average useful life: 40-100 hours of cutting for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; too tight blades break due to mechanical tension. Tension should be checked cold after 5 minutes of operation: if the noise changes significantly, recheck.
