Flott TB 10 Plus is a professional pillar drill, with speeds of 60 – 6,000 rpm, a 0.54 kW motor, and a weight of 44 kg. Krollit, official Flott distributor since 2007.
- Power supply: 230 V three-phase (frequency controlled)
- Motor power: 0.54 kW
- Drilling capacity (steel E335/ST60): 10 / 12 mm
- Tapping capacity: M6
- Spindle: B16
- Drilling depth: 60 mm
Who uses the TB 10 Plus and for what
Machine shops and metalworking workshops use the TB 10 Plus for precision drilling on steel and cast iron, tapping with a tap, and repetitive work on pieces of various sizes.
Its place in the Flott range
The Flott TB 10 Plus is part of the Flott pillar drill range, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for assistance with selection.
Krollit Logistics and Support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the TB 10 Plus for?
The TB 10 Plus is recommended for the following professional profiles:
-
Machine shops and metalworking workshops: precision drilling on steel and cast iron, tapping with a tap.
-
Maintenance workers and repair workshops: repetitive drilling work on pieces of various sizes.
-
Occasional hobby use: professional machine: for home use, consider compact bench models.
Processing Capacity
| Drilling capacity (steel E335/ST60) |
10 / 12 mm |
| Tapping capacity |
M6 |
| Drilling depth |
60 mm |
| Depth indicator |
Digital |
Spindle, tools and speed
| Spindle |
B16 |
| Spindle speed |
60 – 6,000 rpm |
| Spindle/surface distance |
140 – 315 mm |
| Speed indicator |
Digital OLED |
Table, dimensions and geometry
| Column diameter |
70 mm |
| Work surface (L × W) |
300 × 250 mm |
| Machine dimensions |
320 × 520 × 820 mm |
| Weight |
44 kg |
| Head height adjustment |
Manual |
Other specifications
| Projection |
220 mm |
| T-slots |
2 transverse / 14–26 mm |
| Standard |
DIN EN 55011:2016 + A1:2017 |
| Warranty |
3 years (single shift use) |
| Power supply |
230 V three-phase (frequency controlled) |
| Motor power |
0.54 kW |
Frequently asked questions
What is the drilling capacity of the TB 10 Plus?
See the "Drilling capacity" data in the machine's technical table.
The capacity refers to standard unhardened steel. On harder materials or alloyed alloys, the actual capacity may be lower: reduce speed and feed to avoid stressing the spindle and tools.
How is the spindle speed adjusted?
Via mechanical belt or gear change in step models, via inverter or variator in Vario models.
Vario models allow continuous adjustment, while step models require moving the belt to different pulleys. Correct speed selection based on drill diameter and material extends tool life.
What spindle taper and type of tools does it support?
See "Spindle taper" in the technical table: typically MT 2, MT 3 or MT 4 depending on the model.
MT (Morse Taper) tapers are international standards and accessories (arbors, keyless chucks, reductions) are commonly available on the market. Krollit supplies original Bernardo accessories.
Does the drill allow tapping with a tap?
Only models with standard right/left rotation allow tapping with automatic tap release.
Check the "Right/left rotation" or "Tapping" specification: drills without mechanical reversal are not suitable for repetitive tapping.
What is the weight of the machine and what installation does it require?
The weight varies from approximately 25 kg (compact bench models) to over 250 kg (Profi industrial models).
Bench models are installed on a sturdy bench, while column or radial models require floor fixing with expansion anchors for stability during drilling.
