Bernardo spindle flange FLD-315/D11 is a machine tool accessory for professional use available on Krollit, official Bernardo distributor since 2007.
- Flange size: 315/D11
- Diameter: 315 mm
- Taper: 11
- A: 315 mm
- B: 52 mm
- Passage: 192.8 mm
Who uses the FLD-315/D11 spindle flange and for what
Users who own a compatible machine install the FLD-315/D11 spindle flange as an original accessory to extend functionalities or replace worn components.
Its place in the Bernardo range
The Bernardo FLD-315/D11 spindle flange is part of the Bernardo machine tool accessories range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the FLD-315/D11 spindle flange for?
The FLD-315/D11 spindle flange is recommended for the following professional profiles:
-
Users who own the compatible machine: original accessory to extend the functionalities of the indicated machine.
-
Workshops with specific setup needs: component for special machining or increased precision.
-
Compatibility with machines of other brands or models: check machine model and specifications before purchase.
Technical specifications
| Flange size |
315/D11 |
| Diameter |
315 mm |
| Taper |
11 |
| A |
315 mm |
| B |
52 mm |
| Passage |
192.8 mm |
Frequently asked questions
What is the FLD 315 - D11 spindle flange for?
It is a flange for mounting the chuck on metal lathes, with a diameter of Ø 315 mm and D11 camlock mount.
It allows the secure attachment of the chuck to the lathe nose according to FLD standards (DIN 55027 camlock mount with central drawbar). The Ø 315 mm diameter corresponds to the nominal diameter of the compatible chuck.
What is the difference between FL and FLD series?
The FL (Ø flanges) has an external camlock mount according to DIN 55029. The FLD has a central drawbar camlock mount according to DIN 55027 (faster to disassemble).
This model is FLD: for maximum compatibility with the lathe, check the standard of the chuck nose. Most professional Bernardo metal lathes use the FLD attachment.
What does D11 camlock mount indicate?
The D11 (Camlock) code indicates the quick-release system: the number (e.g., D3, D4, D5, D6, D8, D11, D15) identifies the standard size of the camlock mount.
For correct compatibility, check the camlock mount of your lathe: D3-D5 for small/medium lathes, D6-D8 for medium-large lathes, D11-D15 for heavy industrial lathes.
Is it an original Bernardo spare part?
Yes, Krollit has been an official Bernardo distributor since 2007 and exclusively supplies original flanges for Bernardo lathes and DIN compatible ones.
Original flanges comply with the machining tolerances required by the DIN standard to ensure concentricity and balance of the chuck. Do not use non-original flanges in precision machining.
How is the flange mounted on the lathe?
Mounting requires disassembling the existing chuck, thoroughly cleaning the lathe nose, applying a light layer of oil, and tightening with the torque indicated in the manual.
For lathes with a Camlock system (DLD), the cams should be closed by hand until the reference mark (usually a notch or line); do not force with tools. Krollit provides technical documentation and telephone support for mounting.
