Bernardo 4-jaw chuck DK12-125/D3 is a professional lathe chuck, with a diameter of 125 mm, and a weight of 5 kg. Krollit, official Bernardo distributor since 2007.
- Chuck size: 125/D3
- D - Diameter: 125 mm
- Taper: 3
- D1 (max.): 53.988 mm
- D2: 70.6 mm
- D3: 30 mm
Who uses the 4-jaw chuck DK12-125/D3 and for what
Mechanical workshops and artisan turners use the 4-jaw chuck DK12-125/D3 as a clamping accessory on metal lathes, ensuring secure clamping and centering of the workpiece during turning, drilling, and grooving operations.
Its place in the Bernardo range
Bernardo 4-jaw chuck DK12-125/D3 is part of Bernardo's range of lathe chucks, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Shipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 4-jaw chuck DK12-125/D3 for?
The dk12-125/d3 4-jaw chuck is recommended for the following professional profiles:
-
Mechanical workshops and artisan turners: secure clamping of round or hexagonal workpieces on metal lathes for turning, drilling, and grooving operations.
-
Users with a compatible Bernardo lathe flange: original replacement or upgrade for Bernardo range lathes (profi, hobby, etc.) with DIN 55029 A2 mounting.
-
Irregular or non-round workpieces: for non-symmetrically centered workpieces, consider independent 4-jaw chucks or universal platforms.
Technical specifications
| Chuck size |
125/D3 |
| D - Diameter |
125 mm |
| Taper |
3 |
| D1 (max.) |
53.988 mm |
| D2 |
70.6 mm |
| D3 |
30 mm |
| H1 |
63 mm |
| Max. speed |
3000 rpm |
| Approx. weight |
5 kg |
Frequently Asked Questions
When to use a 4-jaw chuck?
Self-centering 4-jaw chucks are for square and 4-8 sided workpieces. The jaws move together with a single wrench.
The self-centering 4-jaw chuck (not with independent jaws) clamps square or octagonal workpieces symmetrically. For off-center (eccentric, asymmetric) clamping, independent jaw chucks are needed.
What material is the chuck body made of?
The material is indicated in the title: steel (PO series) for maximum precision, cast iron (DK/PS series) for standard use.
The choice depends on the intensity of use and the required tolerance: steel for production and precision, cast iron for general use.
What workpieces is the Ø 125 mm diameter suitable for?
Suitable for small-medium workpieces (Ø max ~140 mm): bench lathes and artisan workshops.
The nominal chuck diameter indicates the maximum body size, not the machinable workpiece size. The clamping capacity depends on the jaw opening (typically 60-70% of the nominal Ø).
What does the D3 mounting indicate?
The D3 code (Camlock according to DIN 55029) identifies the size of the lathe nose: D3-D5 for small lathes, D6-D8 for medium, D11-D15 for industrial.
Check the mounting of your lathe before purchasing: the interface flange must exactly match the code. Camlock = quick clamping with cams, disassembly in 30 seconds without tools.
How is chuck precision maintained?
Regular cleaning of the spiral mechanism, periodic lubrication with specific chuck grease, concentricity check every 6 months with a dial indicator.
A jaw that moves with difficulty indicates chips or rust in the mechanism: disassemble, clean, and grease. Concentricity is checked by mounting a ground bar and measuring with a dial indicator: acceptable tolerance 0.03-0.1 mm depending on the model.
