Bernardo BiFlex Saw Band 3400 x 27 x 0.9 mm - Vario 4/6 tpi is a cutting tool for professional use available at Krollit, an official Bernardo distributor since 2007.
- Measurements: 3400 x 27 x 0.9 mm
- Teeth per inch: Vario 4/6
- Material: BiFlex
Who uses the BiFlex Saw Band 3400 x 27 x 0.9 mm - Vario 4/6 tpi and for what
Mechanical workshops and tool laboratories use the BiFlex Saw Band 3400 x 27 x 0.9 mm - Vario 4/6 tpi for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Bernardo range
Bernardo BiFlex Saw Band 3400 x 27 x 0.9 mm - Vario 4/6 tpi is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the BiFlex Saw Band 3400 x 27 x 0.9 mm - Vario 4/6 tpi for
The BiFlex saw band 3400 x 27 x 0.9 mm - vario 4/6 tpi is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machine: replacement part or original tool for the specified machine.
-
Out-of-specification materials: verify workable material and tool geometry before use.
Frequently asked questions
Which band saw is it compatible with?
It is specific for professional metal band saws from the Bernardo MSB series (blade stroke 3400 mm).
Check the blade stroke (closed band length) of your saw before purchasing. The length is indicated in the machine manual or printed on the existing blade.
What is 4-6 TPI toothing used for?
Suitable for cutting large sections and solid profiles (>50 mm), mild steels and non-ferrous alloys. The VARIO pitch (variable tooth pitch) reduces vibrations and extends service life compared to fixed pitch.
General rule for metal: low TPI (4-6) for large solids, medium TPI (8-10) for tubular profiles, high TPI (12-14) for thin sheets and thin-walled pipes. Typical cutting speed: 30-90 m/min on mild steel.
What can be cut with a width of 27 mm?
It is suitable for straight cuts on medium sections with good stability.
The width determines rigidity and the type of cut possible. For metals, a bimetallic blade (Biflex) with M42 HSS teeth brazed onto a flexible body is always required.
What does Biflex mean?
Biflex is a bimetallic blade with a flexible steel body and M42 HSS steel teeth, optimized for metal cutting.
M42 teeth (HSS-Co8 with a high percentage of cobalt) withstand temperatures up to 600 °C and maintain sharpness on hardened steels and hard alloys. The bimetallic structure combines body flexibility and tooth hardness.
How is it tensioned correctly?
Typical tension for metal blades: 25,000-35,000 PSI. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crookedly and break due to fatigue; too tight blades break due to mechanical tension. Always consult the saw's manual for the exact value. Check cold after 5 minutes of operation.
