The Bernardo knife set for FBS 1320 is a professional cutting tool available on Krollit, an official Bernardo distributor since 2007.
- Vendor: Bernardo
- Model: Knife set for FBS 1320
- Official Bernardo distributor since 2007
- Shipping from Krollit warehouse
Who uses the knife set for FBS 1320 and for what purpose
Mechanical workshops and tool shops use the knife set for FBS 1320 for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Bernardo range
The Bernardo knife set for FBS 1320 is part of Bernardo's range of cutting tools, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Shipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Italian-speaking customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the knife set for FBS 1320 for
The knife set for FBS 1320 is recommended for the following professional profiles:
-
Mechanical workshops and tool shops: cutting and sharpening operations on compatible materials.
-
Users with a compatible machine: replacement or original tool for the indicated machine.
-
Out-of-spec materials: verify machinable material and tool geometry before use.
Frequently Asked Questions
Which machine are these knives for?
These are original Bernardo spare parts for the FBS 1320, a foot-operated guillotine shear.
The FBS 1320 has a sheet metal capacity of up to 1.5 mm (400 N/mm²), length 1320 mm, and is intended for sheet metal and roofing workshops. Foot control for hands-free operation, back gauge 0-700 mm.
What operations is the FBS 1320 used for?
The FBS 1320 is a foot-operated guillotine shear with a sheet metal capacity of up to 1.5 mm (400 N/mm²), length 1320 mm, suitable for sheet metal and roofing workshops.
Foot control for hands-free operation, back gauge 0-700 mm. Original Bernardo blades are made of hardened steel to ensure operational durability in continuous work.
Are the blades made of hardened steel?
Yes, Bernardo blades are made of high-quality hardened and ground steel.
Heat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting alloyed steels or thick aluminum.
When should knives be replaced for intensive use?
For continuous use (8 hours/day), a review is recommended every 6 months and preventive replacement every 12-18 months.
Wear indicators: cutting with burrs, deformation of the sheet edge, altered noise during cutting, excessive effort during operation. Keep a spare set in stock.
How is manual replacement performed?
For manual shears and notchers, replacement can be performed by the operator: removal of fastening screws, disassembly of the old knife, assembly of the new one with the correct tightening torque.
Important: observe the tightening torque indicated in the manual (typically 30-60 Nm). Insufficient tightening causes the knife to move, excessive tightening risks cracking it. Krollit provides technical documentation.
