The Jet DDS-225 635 mm professional dual-drum sander is a professional-grade sander, with a sanding width of 635 mm, a 5 HP motor, and a weight of 332 kg. Krollit, official Jet distributor since 2007.
- Power supply: 400 V
- Motor power: 5 HP
- Drum speed: 1,400 rpm
- Feed rate: 3 m/min
- Max working width: 635 mm
- Working thickness: 0.8 – 133 mm
Who uses the DDS-225 635 mm professional dual-drum sander and for what
Professional carpenters and furniture manufacturers use the DDS-225 635 mm professional dual-drum sander for calibrating solid wood, MDF, and plywood panels, ensuring uniform thickness before finishing.
Its place in the Jet range
The Jet DDS-225 635 mm professional dual-drum sander is part of the Jet sander range, distributed in Italy by Krollit since 2007. The Jet range includes models of various categories and performances: to choose the machine suitable for your use case, you can consult the Jet catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the DDS-225 635 mm professional dual-drum sander for?
The DDS-225 635 mm professional dual-drum sander is recommended for the following professional profiles:
-
Professional carpenters and furniture manufacturers: calibration of solid wood, MDF, and plywood panels to ensure uniform thickness.
-
Restoration workshops and custom production: calibrated sanding of large surfaces before finishing.
Not suitable for: processing metals or plastic materials (machine dedicated to wood: specific sanders are needed for other materials).
Table, dimensions and geometry
| Minimum workpiece length |
230 mm |
| Drum dimensions |
152 x 635 mm |
| Belt width |
75 mm / 100 mm |
| Machine dimensions |
1,230 x 1,140 x 1,150 mm |
| Weight |
332 kg |
Other specifications
| Extraction |
2 x 100 mm |
| Max working width |
635 mm |
| Working thickness |
0.8 – 133 mm |
| Drum speed |
1,400 rpm |
| Feed rate |
3 m/min |
| Power supply |
400 V |
| Motor power |
5 HP |
Frequently asked questions
What sanding width does it offer?
See "Max sanding width" in the technical table.
For panels wider than the nominal capacity, multi-pass sanding with precise alignment is required.
What minimum and maximum thickness can it process?
See "Min.-max. workpiece thickness" in the technical table.
For thin workpieces, the use of anti-vibration supports is recommended to maintain uniform pressure.
Does it have multiple sanding stations?
Professional models offer 2-3 stations with different grits for roughing and finishing in a single pass.
Multiple stations reduce processing times and standardize finishing quality.
What power supply does it require?
Typically 400 V three-phase for professional models.
Check the capacity of the electrical line and the presence of a dedicated residual current circuit breaker.
How much does the machine weigh?
See "Weight" in the technical table: industrial models weigh from 500 to over 1500 kg.
Machines over 800 kg require industrial flooring and handling with a forklift during installation.
