The Bernardo FLD-200/D5 spindle flange is a professional machine tool accessory available from Krollit, an official Bernardo distributor since 2007.
- Flange size: 200/D5
- Diameter: 200 mm
- Taper: 5
- A: 200 mm
- B: 30 mm
- Passage: 79.5 mm
Who uses the FLD-200/D5 Spindle Flange and for what
Users who own a compatible machine install the FLD-200/D5 Spindle Flange as an original accessory to extend functionality or replace worn components.
Its place in the Bernardo range
The Bernardo FLD-200/D5 spindle flange is part of the Bernardo machine tool accessories range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the machine suitable for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Shipping within 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the FLD-200/D5 Spindle Flange for?
The FLD-200/D5 spindle flange is recommended for the following professional profiles:
-
Users who own a compatible machine: original accessory to extend the functionality of the indicated machine.
-
Workshops with specific setup needs: component for particular machining operations or increased precision.
-
Compatibility with machines of other brands or models: check machine model and specifications before purchase.
Technical specifications
| Flange size |
200/D5 |
| Diameter |
200 mm |
| Taper |
5 |
| A |
200 mm |
| B |
30 mm |
| Passage |
79.5 mm |
Frequently asked questions
What is the FLD 200 - D5 spindle flange used for?
It is a flange for mounting chucks on metal lathes, with a diameter of Ø 200 mm and D5 camlock.
It allows for secure chuck attachment to the lathe spindle nose according to FLD standard (DIN 55027 camlock with central drawbar). The Ø 200 mm diameter corresponds to the nominal diameter of the compatible chuck.
What is the difference between the FL and FLD series?
The FL (Ø flanges) has an external camlock according to DIN 55029. The FLD has a central drawbar camlock according to DIN 55027 (quicker to disassemble).
This model is FLD: for maximum compatibility with the lathe, check the chuck nose standard. Most professional Bernardo metal lathes use the FLD attachment.
What does the D5 camlock indicate?
The D5 code (Camlock) indicates the quick-release system: the number (e.g., D3, D4, D5, D6, D8, D11, D15) identifies the standard camlock size.
For correct compatibility, check your lathe's camlock: D3-D5 for small/medium lathes, D6-D8 for medium-large lathes, D11-D15 for heavy industrial lathes.
Is this an original Bernardo spare part?
Yes, Krollit has been an official Bernardo distributor since 2007 and exclusively supplies original flanges for Bernardo lathes and DIN compatible ones.
Original flanges comply with the machining tolerances required by the DIN standard to ensure chuck concentricity and balance. Do not use non-original flanges for precision machining.
How is the flange mounted on the lathe?
Mounting requires disassembling the existing chuck, thoroughly cleaning the lathe spindle nose, applying a light layer of oil, and tightening with the torque indicated in the manual.
For lathes with a Camlock system (DLD), the cams should be closed by hand until the reference (usually a notch or line); do not force them with tools. Krollit provides technical documentation and telephone support for mounting.
