The Bernardo chuck flange FL-160/D5 is a professional machine tool accessory available from Krollit, an official Bernardo distributor since 2007.
- Flange dimensions: 160/D5
- Diameter: 160 mm
- Taper: 5
- A: 162 mm
- B: 32 mm
- Through bore: 79.5 mm
Who uses the FL-160/D5 chuck flange and for what
Users who own a compatible machine install the FL-160/D5 chuck flange as an original accessory to extend functionalities or replace worn components.
Its place in the Bernardo range
The Bernardo chuck flange FL-160/D5 is part of the Bernardo machine tool accessories range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the FL-160/D5 chuck flange for?
The FL-160/D5 chuck flange is recommended for the following professional profiles:
-
Users who own a compatible machine: original accessory to extend the functionalities of the indicated machine.
-
Workshops with specific setup requirements: component for special machining or increased precision.
-
Compatibility with machines of other brands or models: verify machine model and specifications before purchase.
Technical specifications
| Flange dimensions |
160/D5 |
| Diameter |
160 mm |
| Taper |
5 |
| A |
162 mm |
| B |
32 mm |
| Through bore |
79.5 mm |
Frequently Asked Questions
What is the FL 160 - D5 chuck flange for?
It is a flange for mounting a chuck on metal lathes, with a diameter of Ø 160 mm and a D5 fitting.
It allows for secure attachment of the chuck to the lathe spindle nose according to FL standards (DIN 55029 external flange fitting). The Ø 160 mm diameter corresponds to the nominal diameter of the compatible chuck.
What is the difference between FL and FLD series?
The FL (Ø flanges) has an external fitting according to DIN 55029. The FLD has a central drawbar fitting according to DIN 55027 (quicker to disassemble).
This model is FL: for maximum compatibility with the lathe, check the chuck nose standard. Most professional Bernardo metal lathes use the FL attachment.
What does D5 fitting indicate?
The D5 (Camlock) code indicates the quick-release system: the number (e.g., D3, D4, D5, D6, D8, D11, D15) identifies the standard size of the fitting.
For correct compatibility, check the fitting of your lathe: D3-D5 for small/medium lathes, D6-D8 for medium-large lathes, D11-D15 for heavy industrial lathes.
Is it an original Bernardo spare part?
Yes, Krollit has been an official Bernardo distributor since 2007 and exclusively supplies original flanges for Bernardo lathes and compatible DIN standards.
Original flanges comply with the machining tolerances required by the DIN standard to ensure concentricity and balance of the chuck. Do not use non-original flanges for precision machining.
How do I mount the flange on the lathe?
Mounting requires disassembling the existing chuck, thoroughly cleaning the lathe spindle nose, applying a light layer of oil, and tightening with the torque indicated in the manual.
For lathes with a Camlock system (DLD), the cams should be closed by hand until the reference mark (usually a notch or line); do not force with tools. Krollit provides technical documentation and phone support for mounting.
