Flott 9 4 6 is a professional metal bandsaw available from Krollit, an official Flott distributor since 2007.
- Material: Bi-metal HSS (M42)
- Blade dimensions: 2910 × 27 × 0.9 mm
- Tooth pitch: 4/6
- Quantity: 1 set (2 pieces)
- Compatibility: Flott HBS 250 A / HBS 250 HA
Who uses the 9 4 6 and for what
Mechanical workshops and metalworking shops use the 9 4 6 for cutting profiles and bars made of steel, aluminum, and cast iron, cross-cutting raw materials before turning or milling.
Its place in the Flott range
Flott 9 4 6 is part of the Flott range of metal bandsaws, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performance levels: to choose the machine suitable for your use case, you can consult the Flott catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Machine shipping in 5-9 business days (7 days to Southern Italy). For spare parts and accessories, shipping in 3-5 business days from Krollit warehouse. Customer support in Italian available for technical documentation, product datasheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the 9 4 6 for
The 9 4 6 is recommended for the following professional profiles:
-
Mechanical workshops and metalworking: cutting profiles and steel bars with acceptable tolerance for subsequent processing.
-
Turners and industrial maintainers: cross-cutting raw materials before turning or milling.
Not suitable for: precision cuts on thin sheets (for thin sheet metal, consider hydraulic shears or circular metal saws).
Technical specifications
| Material |
Bi-metal HSS (M42) |
| Blade dimensions |
2910 × 27 × 0.9 mm |
| Tooth pitch |
4/6 |
| Quantity |
1 set (2 pieces) |
| Compatibility |
Flott HBS 250 A / HBS 250 HA |
Frequently asked questions
What can the 9 4 6 cut?
Profiles, tubes, solid bars, and rolled sections of steel, aluminum, and cast iron within the indicated section limits.
Cutting capacity is expressed in mm of maximum section for round, square, and rectangular profiles. For extra-hard materials, reduce blade speed and use blades with appropriate tooth pitch.
What type of blade does it require?
Bi-metal blade for cutting steel, carbon steel blade for soft metals.
Krollit supplies original Bernardo blades in various tooth pitches to optimize cutting based on material type and thickness.
What cutting speed does it offer?
See "Belt speed" in the technical table: typically adjustable in 2-4 steps or continuously (Vario).
Low speeds (15-30 m/min) for alloy steels, high speeds (50-80 m/min) for light alloys and aluminum. Incorrect selection accelerates blade wear.
Does it have integrated cooling?
Professional models are equipped with a cooling pump with a collection tank and drip tray.
Cooling (with cutting oil or emulsion) prolongs blade life and improves cutting quality on hard materials. For dry cutting, use specific blades.
How much does it weigh and how is it installed?
See "Weight" in the technical table: industrial models weigh from 150 to over 400 kg.
Saws over 200 kg require adequate flooring and fastening. The machine must be placed in an open space for handling long profiles.
