{"product_id":"fresa-diamantata-igm-ekonomik-z1-1-varie-opzioni","title":"IGM Ekonomik Z1+1 Diamond Router Bit - Various Options","description":"\u003cp\u003eIGM Diamond Router Cutter Ekonomik Z1+1 is a diamond CNC router bit with combined upcut and downcut geometry (1 upward cutting edge + 1 downward cutting edge), a hardened steel body and an HW plunge tooth. The declared service life is approximately 50 times longer than standard router bits with carbide cutting edges. Available in 16 versions with diameters from 10 to 20 mm and cutting heights from 26 to 65 mm. The Ekonomik line differs from the standard series due to the reduced height of the diamond knife (2.5 mm), allowing up to 3 resharpenings while maintaining the same cutting performance. Distributed in Italy by Krollit, official IGM distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting edge material: DP (polycrystalline diamond)\u003c\/li\u003e\n\u003cli\u003eBody: hardened steel\u003c\/li\u003e\n\u003cli\u003ePlunge tooth: HW (carbide)\u003c\/li\u003e\n\u003cli\u003eGeometry: upcut + downcut (Z1+1) — clean finish on both top and bottom edges\u003c\/li\u003e\n\u003cli\u003eAvailable diameters: 10, 12, 16, 18, 20 mm\u003c\/li\u003e\n\u003cli\u003eAvailable cutting heights: 26, 35, 45, 54, 65 mm depending on the version\u003c\/li\u003e\n\u003cli\u003eShank: 12 mm (D10–D12), 16 mm (D16), 20 mm (D18–D20)\u003c\/li\u003e\n\u003cli\u003eOperating speed: 18,000 rpm\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 24,000 rpm\u003c\/li\u003e\n\u003cli\u003eFeed speed D10–16 mm: 2–4 m\/min\u003c\/li\u003e\n\u003cli\u003eFeed speed D18–20 mm: 4–8 m\/min\u003c\/li\u003e\n\u003cli\u003eDiamond knife height (Ekonomik): 2.5 mm — up to 3 resharpenings\u003c\/li\u003e\n\u003cli\u003eEstimated service life: approximately 50 times longer than standard HW router bits\u003c\/li\u003e\n\u003cli\u003eExclusive use: CNC machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the Ekonomik series and what it is used for\u003c\/h3\u003e\n\u003cp\u003eThe IGM Ekonomik Z1+1 router bit is used by furniture manufacturers, custom kitchen producers and serial panel manufacturers on CNC machining centers. The upcut+downcut geometry produces a clean finish on both the top and bottom edge of the panel in a single pass, eliminating the chipping typical of single-geometry router bits. It is the standard choice for routing melamine DTD, coated MDF and laminate on CNC nesting machines. Versions with cutting heights from 45 to 65 mm cover panels up to 65 mm thick in a single pass. The Ekonomik line is preferred by users who want the advantage of diamond tooling at a lower cost and accept fewer resharpenings compared with the standard series: 3 resharpenings versus 4–7 for the version with a higher diamond knife.\u003c\/p\u003e\n\u003ch3\u003eWho the Ekonomik series is suitable for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFurniture manufacturer using CNC nesting with DTD and MDF\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eZ1+1 geometry eliminates chipping on the top and bottom edge of melamine panels in a single pass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC operator with medium production volumes and limited budget\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe Ekonomik line offers diamond service life (50x vs HW) at a lower price thanks to the 2.5 mm knife\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperator with portable handheld router\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eThe M170\/Ekonomik series is designed exclusively for CNC machines — not compatible with handheld routers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e solid wood with hard knots, aluminum and composite materials with abrasive fibers — polycrystalline diamond is not suitable for ferrous materials or metal alloys.\u003c\/p\u003e\n\u003ch3\u003eEkonomik vs IGM standard series: when to choose which\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eEkonomik (this series)\u003c\/th\u003e\n\u003cth\u003eIGM standard series\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eDiamond knife height\u003c\/td\u003e\u003ctd\u003e2.5 mm\u003c\/td\u003e\u003ctd\u003eHigher, depending on the version\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNumber of resharpenings\u003c\/td\u003e\u003ctd\u003eUp to 3\u003c\/td\u003e\u003ctd\u003eUp to 4–7 depending on the version\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePurchase price\u003c\/td\u003e\u003ctd\u003eLower\u003c\/td\u003e\u003ctd\u003eHigher\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCutting quality\u003c\/td\u003e\u003ctd\u003eIdentical to the standard series\u003c\/td\u003e\u003ctd\u003eIdentical to Ekonomik\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eWhen to choose\u003c\/td\u003e\u003ctd\u003eMedium volumes, limited budget, occasional resharpening\u003c\/td\u003e\u003ctd\u003eHigh volumes, frequent resharpening, long-term cost per piece to be minimized\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTechnical specifications — all variants\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003eDiameter D (mm)\u003c\/th\u003e\n\u003cth\u003eCutting height I (mm)\u003c\/th\u003e\n\u003cth\u003eLength L (mm)\u003c\/th\u003e\n\u003cth\u003eShank S (mm)\u003c\/th\u003e\n\u003cth\u003eKnives (DP)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eD10x26 L75\u003c\/td\u003e\u003ctd\u003e10\u003c\/td\u003e\u003ctd\u003e26\u003c\/td\u003e\u003ctd\u003e75\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e3DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD10x35 L85\u003c\/td\u003e\u003ctd\u003e10\u003c\/td\u003e\u003ctd\u003e35\u003c\/td\u003e\u003ctd\u003e85\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e4DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD12x26 L75\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e26\u003c\/td\u003e\u003ctd\u003e75\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e3DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD12x35 L85\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e35\u003c\/td\u003e\u003ctd\u003e85\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e4DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD12x45 L95\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e45\u003c\/td\u003e\u003ctd\u003e95\u003c\/td\u003e\u003ctd\u003e12\u003c\/td\u003e\u003ctd\u003e5DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD16x26 L85\u003c\/td\u003e\u003ctd\u003e16\u003c\/td\u003e\u003ctd\u003e26\u003c\/td\u003e\u003ctd\u003e85\u003c\/td\u003e\u003ctd\u003e16\u003c\/td\u003e\u003ctd\u003e3DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD16x35 L95\u003c\/td\u003e\u003ctd\u003e16\u003c\/td\u003e\u003ctd\u003e35\u003c\/td\u003e\u003ctd\u003e95\u003c\/td\u003e\u003ctd\u003e16\u003c\/td\u003e\u003ctd\u003e4DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD16x45 L105\u003c\/td\u003e\u003ctd\u003e16\u003c\/td\u003e\u003ctd\u003e45\u003c\/td\u003e\u003ctd\u003e105\u003c\/td\u003e\u003ctd\u003e16\u003c\/td\u003e\u003ctd\u003e5DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD18x26 L85\u003c\/td\u003e\u003ctd\u003e18\u003c\/td\u003e\u003ctd\u003e26\u003c\/td\u003e\u003ctd\u003e85\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e3DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD18x35 L95\u003c\/td\u003e\u003ctd\u003e18\u003c\/td\u003e\u003ctd\u003e35\u003c\/td\u003e\u003ctd\u003e95\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e4DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD18x45 L105\u003c\/td\u003e\u003ctd\u003e18\u003c\/td\u003e\u003ctd\u003e45\u003c\/td\u003e\u003ctd\u003e105\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e5DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD18x54 L115\u003c\/td\u003e\u003ctd\u003e18\u003c\/td\u003e\u003ctd\u003e54\u003c\/td\u003e\u003ctd\u003e115\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e6DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD20x26 L85\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e26\u003c\/td\u003e\u003ctd\u003e85\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e3DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD20x35 L95\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e35\u003c\/td\u003e\u003ctd\u003e95\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e4DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD20x45 L105\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e45\u003c\/td\u003e\u003ctd\u003e105\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e5DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD20x54 L115\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e54\u003c\/td\u003e\u003ctd\u003e115\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e6DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eD20x65 L125\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e65\u003c\/td\u003e\u003ctd\u003e125\u003c\/td\u003e\u003ctd\u003e20\u003c\/td\u003e\u003ctd\u003e7DP\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCommon specifications for all versions\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eCutting edge material\u003c\/td\u003e\u003ctd\u003eDP (polycrystalline diamond)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eBody\u003c\/td\u003e\u003ctd\u003eHardened steel\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePlunge tooth\u003c\/td\u003e\u003ctd\u003eHW (carbide)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNumber of cutting edges (Z)\u003c\/td\u003e\u003ctd\u003e1+1 (upcut + downcut)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eGeometry\u003c\/td\u003e\u003ctd\u003eCombined upcut and downcut\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eRotation\u003c\/td\u003e\u003ctd\u003eClockwise, right-hand rotation\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eDiamond knife height\u003c\/td\u003e\u003ctd\u003e2.5 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePossible resharpenings\u003c\/td\u003e\u003ctd\u003eUp to 3\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEstimated service life vs standard HW\u003c\/td\u003e\u003ctd\u003eApproximately 50 times longer\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eOperating speed\u003c\/td\u003e\u003ctd\u003e18,000 rpm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eMaximum speed\u003c\/td\u003e\u003ctd\u003e24,000 rpm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eFeed D10–16 mm\u003c\/td\u003e\u003ctd\u003e2–4 m\/min\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eFeed D18–20 mm\u003c\/td\u003e\u003ctd\u003e4–8 m\/min\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eBearing\u003c\/td\u003e\u003ctd\u003eNot included\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eWorkable materials\u003c\/td\u003e\u003ctd\u003eDTD, melamine, laminate, MDF, coated MDF, plywood\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eUse\u003c\/td\u003e\u003ctd\u003eCNC machines only\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to read the variant code\u003c\/h3\u003e\n\u003cp\u003eEach variant is identified by four parameters separated by a hyphen:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eMeaning\u003c\/th\u003e\n\u003cth\u003eExample\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eD__ x __ mm\u003c\/td\u003e\u003ctd\u003eCutting diameter x cutting height\u003c\/td\u003e\u003ctd\u003eD12 x 35 mm = 12 mm diameter, cuts up to 35 mm depth\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eL__\u003c\/td\u003e\u003ctd\u003eTotal length of the router bit in mm\u003c\/td\u003e\u003ctd\u003eL85 = total length 85 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eS__\u003c\/td\u003e\u003ctd\u003eShank diameter in mm — must match your CNC spindle\u003c\/td\u003e\u003ctd\u003eS12 = 12 mm shank · S16 = 16 mm shank · S20 = 20 mm shank\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e__DP\u003c\/td\u003e\u003ctd\u003eNumber of diamond knives — more knives = more possible resharpenings\u003c\/td\u003e\u003ctd\u003e3DP = 3 knives, up to 3 resharpenings · 7DP = 7 knives, up to 7 resharpenings\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow to choose:\u003c\/strong\u003e choose the diameter according to the toolpath programmed on your CNC (D12 and D16 are the most common on nesting machines). Choose a cutting height equal to or greater than the panel thickness (e.g. 18 mm panel → 26 mm height is sufficient, 35 mm gives more margin). Check the shank: S12 for 12 mm spindles, S16 for 16 mm spindles, S20 for 20 mm spindles. The number of DP knives does not change cutting performance but determines how many times the bit can be resharpened before replacement.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does Z1+1 mean and why is it important on melamine DTD?\u003c\/h3\u003e\n\u003cp\u003eZ1+1 means that the bit has one upward-oriented cutting edge (upcut) and one downward-oriented cutting edge (downcut). The upcut edge pushes the fibers downward on the lower edge of the panel, while the downcut edge pushes them downward on the upper edge. The result is a clean finish on both faces of the melamine panel in a single pass, without the chipping typical of single-geometry bits.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the Ekonomik line and the IGM standard series?\u003c\/h3\u003e\n\u003cp\u003eThe difference lies in the height of the diamond knife: 2.5 mm in the Ekonomik line compared with higher values in the standard series. This does not affect cutting quality, which is identical, but reduces the maximum number of resharpenings to 3 instead of 4–7. The purchase price is lower. The choice depends on production volume: for medium volumes with occasional resharpening, Ekonomik is the economically correct choice; for high volumes with frequent resharpening, the standard series has a lower cost per piece in the long term.\u003c\/p\u003e\n\u003ch3\u003eHow do you choose the correct cutting height for your panel?\u003c\/h3\u003e\n\u003cp\u003eThe cutting height must be equal to or greater than the thickness of the panel being machined. For standard 18 mm panels, the 26 mm height version is sufficient. For 25 mm panels, 26 mm is the minimum, but 35 mm is preferable to have more margin. The 45, 54 and 65 mm versions cover thick panels and machining with multiple overlapping passes.\u003c\/p\u003e\n\u003ch3\u003eWhat is the correct feed speed on CNC?\u003c\/h3\u003e\n\u003cp\u003eFor D10–16 mm diameters, the manufacturer indicates 2–4 m\/min at an operating speed of 18,000 rpm. For D18–20 mm diameters, the feed speed increases to 4–8 m\/min. Exceeding the maximum feed speed reduces the life of the diamond knife and may cause chipping. Working below the indicated minimum increases heat and wears the cutting edge by friction rather than cutting.\u003c\/p\u003e\n\u003ch3\u003eCan the diamond router bit be used on raw MDF as well as melamine?\u003c\/h3\u003e\n\u003cp\u003eYes. The declared compatible materials include DTD, melamine, laminate, MDF and coated MDF. Polycrystalline diamond is particularly effective on high-density MDF, which is abrasive for standard HW cutting edges and rapidly reduces their service life. On MDF, the diamond service life is the main advantage compared with conventional HW router bits.\u003c\/p\u003e\n\u003ch3\u003eHow many times can it be resharpened and where?\u003c\/h3\u003e\n\u003cp\u003eThe Ekonomik line allows up to 3 resharpenings thanks to the 2.5 mm diamond knife height. Resharpening polycrystalline diamond requires specialized equipment and cannot be done with conventional grinding wheels. Contact Krollit at +39 0825-1494022 for information about available diamond resharpening centers in Italy.\u003c\/p\u003e","brand":"igm","offers":[{"title":"D10 x 26 mm - L75 - S12 - 3DP","offer_id":53194237411656,"sku":"M170-10021","price":75.84,"currency_code":"EUR","in_stock":true},{"title":"D10 x 35 mm - L85 - S12 - 4DP","offer_id":53194237444424,"sku":"M170-10121","price":101.1,"currency_code":"EUR","in_stock":true},{"title":"D12 x 26 mm - L75 - S12 - 3DP","offer_id":53194237477192,"sku":"M170-12021","price":81.4,"currency_code":"EUR","in_stock":true},{"title":"D12 x 35 mm - L85 - S12 - 4DP","offer_id":53194237509960,"sku":"M170-12121","price":115.73,"currency_code":"EUR","in_stock":true},{"title":"D12 x 45 mm - L95 - S12 - 5DP","offer_id":53194237542728,"sku":"M170-12221","price":138.84,"currency_code":"EUR","in_stock":true},{"title":"D16 x 26 mm - L85 - S16 - 3DP","offer_id":53194237575496,"sku":"M170-16061","price":75.84,"currency_code":"EUR","in_stock":true},{"title":"D16 x 35 mm - L95 - S16 - 4DP","offer_id":53194237608264,"sku":"M170-16161","price":101.1,"currency_code":"EUR","in_stock":true},{"title":"D16 x 45 mm - L105 - S16 - 5DP","offer_id":53194237641032,"sku":"M170-16261","price":126.36,"currency_code":"EUR","in_stock":true},{"title":"D18 x 26 mm - L85 - S20 - 3DP","offer_id":53194237673800,"sku":"M170-18031","price":75.84,"currency_code":"EUR","in_stock":true},{"title":"D18 x 35 mm - L95 - S20 - 4DP","offer_id":53194237706568,"sku":"M170-18131","price":101.1,"currency_code":"EUR","in_stock":true},{"title":"D18 x 45 mm - L105 - S20 - 5DP","offer_id":53194237739336,"sku":"M170-18231","price":126.36,"currency_code":"EUR","in_stock":true},{"title":"D18 x 54 mm - L115 - S20 - 6DP","offer_id":53194237772104,"sku":"M170-18331","price":151.48,"currency_code":"EUR","in_stock":true},{"title":"D20 x 26 mm - L85 - S20 - 3DP","offer_id":53194237804872,"sku":"M170-20031","price":75.84,"currency_code":"EUR","in_stock":true},{"title":"D20 x 35 mm - L95 - S20 - 4DP","offer_id":53194237837640,"sku":"M170-20131","price":101.1,"currency_code":"EUR","in_stock":true},{"title":"D20 x 45 mm - L105 - S20 - 5DP","offer_id":53194237870408,"sku":"M170-20231","price":126.36,"currency_code":"EUR","in_stock":true},{"title":"D20 x 54 mm - L115 - S20 - 6DP","offer_id":53194237903176,"sku":"M170-20331","price":151.61,"currency_code":"EUR","in_stock":true},{"title":"D20 x 65 mm - L125 - S20 - 7DP","offer_id":53194237935944,"sku":"M170-20431","price":176.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresa_diamantata_CNC_IGM_Ekonomik_Z1_1_upcut_downcut_acciaio_temprato_dente_HW.jpg?v=1779963216","url":"https:\/\/www.krollit.com\/products\/fresa-diamantata-igm-ekonomik-z1-1-varie-opzioni","provider":"Krollit","version":"1.0","type":"link"}