Bernardo work gloves for the Bernardo SB 1 sandblaster are original spare parts made of rubber and reinforced anti-abrasion fabric, supplied in a pack of 1 pair. They are mounted in the side holes of the sandblasting cabinet to protect hands during abrasive sandblasting operations. The reinforced edge allows attachment to the armhole of the sandblaster, the inner surface offers a secure grip and optimal sensitivity, and the material resists abrasion and wear caused by micro-particles and metallic residues during work inside the cabinet. Compatible with the Bernardo SB 1 sandblaster and equivalent cabinets with the same hole size. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.
-
Pack: 1 pair
-
Compatibility: Bernardo SB 1 Sandblaster
-
Material: Rubber and reinforced anti-abrasion fabric
-
Type: Original spare part for sandblasting cabinet
-
Mounting: In the side holes of the cabinet with reinforced edge
-
Colour: Black
-
Origin: Bernardo - Austria
Who uses SB 1 gloves and for what
Bernardo SB 1 sandblaster gloves are essential original spare parts for the correct operation of the SB 1 sandblasting cabinet. The gloves are mounted in the side holes of the cabinet with a reinforced edge, allowing the operator to handle the workpiece inside the cabinet while the abrasive flow is active, without exposing hands to abrasive particulate matter. Gloves are consumables: in daily professional use, they typically last 6-18 months before requiring replacement, depending on intensity of use, type of abrasive (fine silica lasts longer, aluminum oxide medium duration, steel grit shorter duration) and care in use. Key construction feature: the material is abrasion-resistant (rubber + reinforced fabric) but maintains sufficient flexibility for fine workpiece handling. For sandblasting operators: timely glove replacement is essential for safety: damaged or punctured gloves allow abrasive particulate matter to pass inside the cabinet towards the operator's hands, with a risk of injury. Krollit customers purchase gloves for: scheduled periodic replacement, warehouse stock to avoid machine downtime, protection for multiple operators with glove changes between shifts. The SB 1 sandblaster is the smallest model in the range (compact cabinet) for craft and advanced hobby use.
Krollit logistics and support
Shipping 3-5 business days from warehouse (gloves are continuously stocked spare parts). Single pack with quick assembly instructions and protective packaging. For multiple stock orders (e.g., 5-10 pairs), Krollit offers dedicated conditions for professional workshops. Customer support in Italian available for compatibility questions.
Who the SB 1 gloves are for
| Profile |
Compatibility |
Reason |
| Bernardo SB 1 Sandblaster Operator |
Recommended |
Original Bernardo spare part: sized exactly for the cabinet's hole and arm edge. Compatibility with non-Bernardo cabinets must be verified on a case-by-case basis. |
| Workshop with scheduled periodic replacement |
Recommended |
Standard maintenance program: replacement every 6-18 months depending on intensity of use. For continuous intensive use, a stock of 2-3 pairs is recommended. |
| Spare parts warehouse for technical service |
Recommended |
Resellers, technical service centers, and sandblaster maintenance workshops purchase stock to avoid customer machine downtime. Standard 3-5 business days shipping. |
Not suitable for: sandblasters of different brands without compatibility verification (cabinet hole and arm edge may be different); applications with aggressive non-standard abrasives (coarse aluminum oxide or steel grit can significantly reduce glove life); cabinets with non-standard hole size (compatibility verification with your model is recommended before purchase, especially for cabinets older than 15 years).
Technical characteristics
| Specification |
Value |
| Brand |
Bernardo |
| Compatible model |
Bernardo SB 1 Sandblaster |
| Type |
Work gloves for sandblasting cabinet |
| Material |
Rubber and reinforced anti-abrasion fabric |
| Packaging |
1 pair |
| Color |
Black |
| Origin |
Austria |
Compliance
| Specification |
Value |
| Marking |
CE |
| PPE Category |
Category II (medium risks) |
Standard equipment
- 1 pair of work gloves for Bernardo SB 1 Sandblaster
- Quick assembly instructions
- Protective packaging
Frequently asked questions
Are they compatible with sandblasters of other brands?
The gloves are sized specifically for the Bernardo SB 1 Sandblaster cabinet and for equivalent cabinets with the same armhole size (typical diameter 200-220 mm). For sandblasters of other brands (Tecna, Vaniman, Trinity Tools, Renfert, etc.), check the hole diameter and arm edge before purchasing.
Sandblaster gloves are standardized products in most cases: the typical hole size is 200, 220, or 250 mm in diameter. For vintage cabinets (over 15 years old) or less common brands, compatibility verification is recommended: contact Krollit assistance providing the brand, model, and hole diameter for verification.
How long do they last in daily professional use?
The typical lifespan is 6-18 months in daily professional use. Variability depends on: intensity of use (occasional sandblasting = longer life), type of abrasive used (fine silica = longer life; aluminum oxide = medium life; steel grit or steel shot = shorter life), care in use (complete removal of residues before touching the glove, delicate handling).
For continuous intensive use (more than 4 hours a day), replacement is recommended every 4-8 months even if the glove still appears intact: the material can lose elasticity over time, creating invisible micro-cracks that reduce protection. For occasional hobby use, the lifespan can extend to 3-5 years if the glove is kept in good storage conditions (dry, without direct sunlight exposure).
How are they installed in the cabinet?
Installation typically takes 5-10 minutes without special tools. Standard procedure: removal of old gloves (by loosening the clamping ring of the cabinet arm), cleaning the edge of the hole, inserting new gloves from inside the cabinet outwards, aligning the reinforced edge over the hole, tightening the ring with adequate pressure (neither too loose to prevent abrasive passage, nor too tight to prevent edge deformation).
The quick assembly instructions included in the package describe the specific procedure for the model. For cabinets with a different clamping system (e.g., threaded collar, lever clamp), instructions may vary slightly. After installation, a dry run test is recommended (close the cabinet, activate the suction, check for absence of particulate passage from the glove edges).
Which abrasives are compatible?
The gloves are compatible with all standard types of abrasives for professional sandblasting: silica (natural sand), aluminum oxide (corundum), silicon carbide (green), glass grit, glass beads, steel grit, plastic, sodium bicarbonate.
For aggressive abrasives (coarse aluminum oxide, steel grit for industrial sandblasting of large parts), glove life is significantly reduced: anticipate more frequent replacements. For delicate abrasives (glass beads for delicate finishing, sodium bicarbonate for cleaning), life is extended. Important: the use of abrasives not compatible with the specific cabinet (e.g., metallic abrasives in cabinets designed for silica) can cause accelerated damage to gloves and cabinet.
Can I wash them to reuse them for longer?
Yes, to a limited extent. External cleaning with a dry or slightly damp cloth (water + mild soap) can remove accumulated abrasive residues. Deep washing with aggressive detergents is not recommended: it can degrade the material (rubber), reducing elasticity and protection.
To extend the life of gloves in daily use: removal of abrasive residues after each work session (with compressed air or dry cloth), storage in a dry environment without exposure to direct sunlight or heat sources, periodic inspection to identify micro-cracks or wear before they become problematic. Preventative replacement every 12 months even if the gloves appear intact: operator safety takes precedence over the maximum lifespan of the consumable component.
