IGM F042 is a bevel trimming cutter with replaceable carbide knives (HW) and an integrated guide bearing, designed for trimming and beveling solid wood, MDF and edge-banded panels. It is available in three angles (22°, 30°, 45°) and four shank sizes (6 mm, 6.35 mm, 8 mm, 12.7 mm), with the guide bearing included in every version. It is distributed in Italy by Krollit, official IGM distributor since 2007.
- Available angles: 22°, 30°, 45°
- Shank: 6 mm, 6.35 mm, 8 mm, 12.7 mm
- Cutting diameter: 25 mm (22°), 28 mm (30°), 29 mm (45°)
- Cutting height: 11 mm (22°), 10 mm (30°), 8 mm (45°)
- Number of cutting edges: 2
- Geometry: straight cutting edge
- Rotation: clockwise (right-hand rotation)
- Knife material: HW carbide, replaceable
- Guide bearing: included in all versions
Who uses the F042 and what it is used for
The IGM F042 cutter is used by carpenters, woodworking craftsmen and panel installers with handheld routers. The 22° angle is chosen for decorative bevels on edges and frames. The 30° version is the most requested for trimming coated panels and edge-banded MDF. The 45° version is used for angled joints on furniture, cabinet doors and worktops. The 6.35 mm (1/4") and 12.7 mm (1/2") shanks also make the cutter compatible with routers of North American and British origin.
Who the F042 is suitable for
| Profile |
Compatibility |
Reason |
| Carpenter with handheld router |
Suitable |
Guide bearing included, designed for manual router use |
| Custom furniture maker |
Suitable |
Three angles cover decorative beveling, trimming and 45° joints |
| High-frequency CNC operator |
Not recommended |
For continuous CNC cycles with frequent tool changes, dedicated solid HW cutters are preferred |
Not suitable for: machining aluminum, hard plastic or fiber-reinforced composites — the HW knives in this series are designed for wood and wood-based materials.
Technical specifications — all variants
| Angle (α) |
Shank S (mm) |
IGM Code |
Diameter D (mm) |
Length L (mm) |
Cutting height I (mm) |
Ø Bearing B (mm) |
| 22° | 6 | F042-22050 | 25 | 65 | 11 | 13 |
| 22° | 6.35 | F042-22051 | 25 | 65 | 11 | 13 |
| 22° | 8 | F042-22080 | 25 | 65 | 11 | 13 |
| 30° | 6 | F042-30060 | 28 | 66 | 10 | 16 |
| 30° | 6.35 | F042-30061 | 28 | 66 | 10 | 16 |
| 30° | 8 | F042-30080 | 28 | 60 | 10 | 16 |
| 45° | 6 | F042-45060 | 29 | 60 | 8 | 16 |
| 45° | 8 | F042-45080 | 29 | 60 | 8 | 16 |
| 45° | 12.7 | F042-45127 | 29 | 68 | 8 | 16 |
Common specifications for all versions
| Number of cutting edges (Z) | 2 |
| Geometry | Straight cutting edge |
| Rotation | Clockwise (right-hand rotation) |
| Knife material | HW carbide |
| Replaceable knives | Yes |
| Guide bearing | Included |
Frequently Asked Questions
Which materials can be machined with the IGM F042?
The F042 is designed for solid wood, MDF, coated chipboard and wooden edges. The HW carbide knives are not suitable for aluminum, hard plastic or fiber-reinforced composites.
Is the 6.35 mm shank compatible with European routers?
The 6.35 mm diameter corresponds to 1/4 inch, a standard size for routers of North American and British origin. European routers usually have 6, 8 or 12 mm collets. Before purchasing, check the collet diameter of your machine.
What is the practical difference between 22°, 30° and 45°?
The 22° version produces an angled bevel, used for decorative edging and frames. The 30° version is the most common angle for trimming edge-banded MDF panels. The 45° version produces a clean 45-degree bevel for angled joints on furniture and cabinet doors.
Are the knives replaceable and where can they be found?
Yes, the HW knives are replaceable. Original IGM spare parts are available from the Krollit warehouse in Monteforte Irpino (AV). When requesting spare parts, indicate the IGM code of your version.
Is the bearing included or must it be purchased separately?
The guide bearing is included in all versions. The diameter is 13 mm for the 22° versions and 16 mm for the 30° and 45° versions.
