Bernardo Lathe Chisel Set Starter D, HSS, 5 pcs. is a cutting tool for professional use available on Krollit, official Bernardo distributor since 2007.
- Roughing gouge: 19 mm
- Spindle gouge: 12 mm
- Spindle gouge: 10 mm
- Parting tool: 10 mm
- Cut-off tool: 13 mm
- Tool: Cutting width
Who uses the Lathe Chisel Set Starter D, HSS, 5 pcs. and for what
Mechanical workshops and tool shops use the Lathe Chisel Set Starter D, HSS, 5 pcs. for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Bernardo range
Bernardo Lathe Chisel Set Starter D, HSS, 5 pcs. is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer assistance in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the Lathe Chisel Set Starter D, HSS, 5 pcs. for
The lathe chisel set starter d, hss, 5 pcs. is recommended for the following professional profiles:
-
Mechanical workshops and tool shops: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the specified machine.
-
Out-of-specification materials: verify workable material and tool geometry before use.
Technical specifications
| Roughing gouge |
19 mm |
| Spindle gouge |
12 mm |
| Spindle gouge |
10 mm |
| Parting tool |
10 mm |
| Cut-off tool |
13 mm |
| Tool |
Cutting width |
Frequently Asked Questions
What is this set of woodturning chisels for?
It is used with wood lathes with standard tool holders for the operations indicated in the product title.
The choice of the specific model depends on the number of pieces and the type of steel (HSS or Carbon). Compatible with any wood lathe with standard section tool holders.
What steel are the chisels made of?
These chisels are made of HSS steel.
HSS withstands temperatures up to 600 °C and is suitable for most woods and materials. Carbon Steel is cheaper but has a shorter lifespan, suitable for hobby use and softwoods.
How many pieces does the set contain?
This set contains 5 pieces.
Starter sets (4-5 pieces) for beginners, professional sets (6-8 pieces) for complete operations with gouges, flat chisels, scrapers, and parting tools.
Do they need to be sharpened periodically?
Yes, lathe chisels need to be sharpened regularly to maintain a clean cut. The frequency depends on the intensity of use and the material being worked.
For HSS chisels, sharpening is recommended every 8-15 hours of actual work. Krollit supplies dedicated Bernardo sharpeners (BSG, DG series) to maintain the correct cutting edge angle.
How should they be stored correctly?
Store in a dedicated drawer or mat with individual protection, lightly oiled to prevent oxidation. Avoid contact between cutting edges.
Surface oxidation reduces cutting quality and accelerates wear. Clean after each use and apply a protective film (machine oil or WD-40). Store in a dry place, away from heat sources.
