The Bernardo ZSM 560 Vario - 230 V is a sander for professional use, with a sanding width of 560 mm (1120 mm in double pass), a 1.5 kW (2.0 HP) motor, and a weight of 110 kg. Krollit has been the official Bernardo distributor since 2007.
- Max grinding width: 560 mm (1120 mm in double pass)
- Min workpiece length: 60 mm
- Min/max workpiece thickness: 5 – 80 mm
- Table dimensions: 500 × 580 mm
- Table extension: 245 × 580 mm per side
- Working height: 680 mm
Who uses the ZSM 560 Vario - 230 V and for what
Professional carpentry workshops and furniture manufacturers use the ZSM 560 Vario - 230 V for sanding solid wood, MDF, and plywood panels, standardizing the thickness before finishing.
Its place in the Bernardo range
The Bernardo ZSM 560 Vario - 230 V is part of the Bernardo sander range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South of Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the ZSM 560 Vario - 230 V for
The ZSM 560 Vario - 230 V is recommended for the following professional profiles:
-
Professional carpentry workshops and furniture manufacturers: sanding solid wood, MDF, and plywood panels to standardize thickness.
-
Restoration workshops and custom production: calibrated sanding of large surfaces before finishing.
Not suitable for: processing metals or plastic materials (this machine is dedicated to wood: specific sanders are needed for other materials).
Table, dimensions, and geometry
| Min workpiece length |
60 mm |
| Table extension |
245 × 580 mm per side |
| Working height |
680 mm |
| Machine dimensions (L × W × H) |
1010 × 1060 × 1190 mm |
| Weight |
110 kg |
Other specifications
| Table dimensions |
500 × 580 mm |
| Grinding roller |
Ø130 × 565 mm |
| Continuous feed |
0.5 – 3 m/min |
| Abrasive belt |
K100 |
| Max grinding width |
560 mm (1120 mm in double pass) |
| Min/max workpiece thickness |
5 – 80 mm |
| Continuous speed |
0 – 1500 rpm |
| Dust extraction port |
Ø100 mm |
| Motor power |
1.5 kW (2.0 HP) |
| Voltage |
230 V |
Frequently Asked Questions
What sanding width does it offer?
See "Max grinding width" in the technical table.
For panels wider than the nominal capacity, multi-pass sanding with precise alignment is required.
What is the minimum and maximum thickness it can work with?
See "Min.–max. workpiece thickness" in the technical table.
For thin workpieces, the use of anti-vibration supports is recommended to maintain uniform pressure.
Does it have multiple sanding stations?
Professional models offer 2-3 stations with different grits for roughing and finishing in a single pass.
Multiple stations reduce processing times and standardize finish quality.
What power supply does it require?
Typically 400 V three-phase for professional models.
Check the capacity of the electrical line and the presence of a dedicated residual current device.
How much does the machine weigh?
See "Weight" in the technical table: industrial models weigh from 500 to over 1500 kg.
Machines over 800 kg require industrial flooring and forklift handling during installation.
