{"product_id":"kit-applicatori-colla-silicone-igm-titebond","title":"IGM Silicone Glue Applicator Kit with Titebond Glue of your choice","description":"\u003cp\u003e\u003cstrong\u003eIGM Silicone Glue Applicator Kit – 10 tips for dowels, DOMINO, and biscuits, tray included, with choice of Titebond glue\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IGM silicone applicator kit is an accessory for hobbyist-professional use, consisting of 10 soft silicone tips for uniform glue distribution in dowel holes (6, 8, 10, and 12 mm), DOMINO (6, 8, and 10 mm), biscuit joinery, grooves, thin slots, and narrow holes, with an included silicone tray for collecting excess glue. Available in a combo with your choice of Titebond glue: Original D2, II Premium D3, or III Ultimate D4. Distributed in Italy by Krollit, official IGM and Titebond distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eØ 6 mm dowel tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eØ 8 mm dowel tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eØ 10 mm dowel tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eØ 12 mm dowel tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eØ 6 mm DOMINO tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eØ 8 mm DOMINO tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eØ 10 mm DOMINO tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eBiscuit joinery tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eGroove tip: 1 pc\u003c\/li\u003e\n\u003cli\u003eSlot \/ narrow hole tip: 2 pcs (capillary slot + narrow hole)\u003c\/li\u003e\n\u003cli\u003eSilicone tray with front slots for glue recovery and tip rest\u003c\/li\u003e\n\u003cli\u003ePlastic handle\u003c\/li\u003e\n\u003cli\u003eGlue included: Titebond of your choice (selectable variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich Titebond glue to choose for your needs\u003c\/h3\u003e\n\u003cp\u003eThe combo is available with three Titebond glue variants. The choice depends on the application environment and the required water resistance level.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eGlue\u003c\/th\u003e\n\u003cth\u003eEN 204 Class\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eOpen time\u003c\/th\u003e\n\u003cth\u003eMin. application temp.\u003c\/th\u003e\n\u003cth\u003eWhen to choose it\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTitebond Original\u003c\/td\u003e\n\u003ctd\u003eD2\u003c\/td\u003e\n\u003ctd\u003eIndoor only\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003ctd\u003e10°C\u003c\/td\u003e\n\u003ctd\u003eIndoor carpentry, furniture, stairs, parquet: high initial tack, fast clamping, yellow color after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTitebond II Premium\u003c\/td\u003e\n\u003ctd\u003eD3\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003ctd\u003e13°C\u003c\/td\u003e\n\u003ctd\u003eWindow frames, outdoor furniture, structures exposed to occasional humidity: only single-component D3 glue certified EN 204, compatible with RF and hot press systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTitebond III Ultimate\u003c\/td\u003e\n\u003ctd\u003eD4\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003ctd\u003emax 10 min\u003c\/td\u003e\n\u003ctd\u003e8°C\u003c\/td\u003e\n\u003ctd\u003eApplications with prolonged water exposure, cutting boards and food contact products, outdoor construction: resistance to mold, solvents, and heat, applicable at lower temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eWho is this kit for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eArtisan carpenter with dowel or DOMINO joinery\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe 4 dowel tips (6–12 mm) and 3 DOMINO tips cover all standard Festool DOMINO DF 500 and DF 700 sizes; the soft silicone distributes glue on the inner walls of the hole without clogging it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyist with occasional use of biscuits or lamello\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe biscuit joinery tip applies glue to the routed slot uniformly on both sides; the silicone tray allows for excess glue recovery without waste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse with two-component epoxy or polyurethane glues\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eSilicone tips are designed for water-based dispersions (PVA, alkyl resin); with expanding polyurethane or epoxy glues, cleaning is difficult and silicone can degrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e application of expanding polyurethane glues (such as Gorilla Glue), two-component epoxy glues, or solvent-based contact adhesives, as cleaning of silicone tips with water is not feasible in these cases.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ch3\u003eIGM applicator kit\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of tips included\u003c\/td\u003e\n\u003ctd\u003e10 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDowel tips\u003c\/td\u003e\n\u003ctd\u003eØ 6, 8, 10, 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDOMINO tips\u003c\/td\u003e\n\u003ctd\u003eØ 6, 8, 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecialized tips\u003c\/td\u003e\n\u003ctd\u003eBiscuit joinery, groove, capillary slot, narrow hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip and tray material\u003c\/td\u003e\n\u003ctd\u003eSilicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning\u003c\/td\u003e\n\u003ctd\u003eWarm water or dry peeling after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandle\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTitebond Original – technical parameters (D2)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlkyl resin in aqueous dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater resistance class\u003c\/td\u003e\n\u003ctd\u003eD2 (EN 204)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eIndoor only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor after drying\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen time\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly time\u003c\/td\u003e\n\u003ctd\u003e10–15 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure time\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating and storage temperature\u003c\/td\u003e\n\u003ctd\u003e10°–24°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilutable with water\u003c\/td\u003e\n\u003ctd\u003eYes, up to 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTitebond II Premium – technical parameters (D3)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePVA glue in dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater resistance class\u003c\/td\u003e\n\u003ctd\u003eD3 (EN 204)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor after drying\u003c\/td\u003e\n\u003ctd\u003eYellow\/orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen time\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly time\u003c\/td\u003e\n\u003ctd\u003e10–15 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure time\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating and storage temperature\u003c\/td\u003e\n\u003ctd\u003e13°–24°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRF \/ hot press systems compatibility\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTitebond III Ultimate – technical parameters (D4)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAdvanced proprietary polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater resistance class\u003c\/td\u003e\n\u003ctd\u003eD4 (EN 204)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor after drying\u003c\/td\u003e\n\u003ctd\u003eLight brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen time\u003c\/td\u003e\n\u003ctd\u003emax 10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly time\u003c\/td\u003e\n\u003ctd\u003e20–25 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure time\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating and storage temperature\u003c\/td\u003e\n\u003ctd\u003e8°–24°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable for food contact\u003c\/td\u003e\n\u003ctd\u003eYes (cutting boards and similar products)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 plastic handle\u003c\/li\u003e\n\u003cli\u003e4 silicone dowel tips: Ø 6, 8, 10, 12 mm\u003c\/li\u003e\n\u003cli\u003e3 silicone DOMINO tips: Ø 6, 8, 10 mm\u003c\/li\u003e\n\u003cli\u003e1 silicone biscuit joinery tip\u003c\/li\u003e\n\u003cli\u003e1 silicone groove tip\u003c\/li\u003e\n\u003cli\u003e1 silicone capillary slot tip\u003c\/li\u003e\n\u003cli\u003e1 silicone narrow hole tip\u003c\/li\u003e\n\u003cli\u003e1 silicone tray with front slots\u003c\/li\u003e\n\u003cli\u003e1 bottle of Titebond glue (variant of choice: Original D2, II Premium D3, III Ultimate D4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre the DOMINO tips in the IGM kit compatible with the Festool DOMINO DF 500 and DF 700 systems?\u003c\/summary\u003e\n\u003cp\u003eYes. The 6, 8, and 10 mm DOMINO tips cover all sizes of DOMINO tenons used with Festool DF 500 and DF 700. The tip is inserted into the routed hole and distributes the glue on the inner walls before inserting the tenon.\u003c\/p\u003e\n\u003cp\u003eCorrect application involves pouring a small amount of glue into the tray, dipping the tip, and inserting it into the hole, rotating it slightly to distribute the glue over the entire inner surface. This method reduces air bubbles and glue squeeze-out from the joint during clamping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the practical difference between Titebond II D3 and Titebond III D4 for outdoor joinery?\u003c\/summary\u003e\n\u003cp\u003eThe main difference is the degree of water resistance and open time: Titebond II D3 offers resistance to occasional moisture with an open time of 5 min; Titebond III D4 is waterproof with an open time of 10 min, suitable for prolonged water exposure.\u003c\/p\u003e\n\u003cp\u003eFor window frames and garden furniture exposed to rain but not immersion, Titebond II D3 is sufficient and more economical. Titebond III D4 is recommended for structural elements exposed to repeated wetting and drying cycles (decks, outdoor shutters, garden structures) and for the production of cutting boards and food-contact items. The longer open time of Titebond III facilitates the assembly of complex structures with multiple joints.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow are the silicone tips of the IGM kit cleaned after use?\u003c\/summary\u003e\n\u003cp\u003eThe tips should be washed with warm water immediately after use. If the glue has already dried, the silicone allows it to be removed by peeling, without the need for solvents.\u003c\/p\u003e\n\u003cp\u003eThe silicone tray allows excess glue to be poured back into the original bottle using the front slots as a spout, avoiding waste. The tips can be rested on the same slots during work breaks to keep the work surface clean. Do not use this kit with polyurethane or epoxy glues: cleaning in those cases is not feasible with water and can damage the silicone.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs Titebond Original D2 suitable for dowel joints on indoor furniture?\u003c\/summary\u003e\n\u003cp\u003eYes. Titebond Original D2 is the standard choice for dowel joinery on indoor furniture: high initial tack, assembly time of 10–15 min, and dry strength superior to the wood itself.\u003c\/p\u003e\n\u003cp\u003eThe maximum open time of 5 minutes requires preparing all dowels and applying glue to all holes before starting assembly. For complex structures with many simultaneous joints, or in environments with temperatures above 20°C that accelerate drying, it is advisable to switch to Titebond III D4, which offers an open time of 10 minutes.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan Titebond III D4 really be used for cutting boards and food-contact items?\u003c\/summary\u003e\n\u003cp\u003eYes. Titebond III Ultimate meets European requirements for food contact and is explicitly indicated by the manufacturer for the production of cutting boards and similar products.\u003c\/p\u003e\n\u003cp\u003eThis certification applies to fully cured glue (24 hours of curing). The dry joint is resistant to washing with water, which is crucial for cutting boards subjected to frequent washing. It should be noted that Titebond Original D2 and Titebond II D3 do not have this specification for food contact: for cutting boards and wooden kitchen utensils, Titebond III is the correct choice within this kit.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Titebond","offers":[{"title":"Titebond III Ultimate Wood Glue D4 - 237ml (Green)","offer_id":53012871807304,"sku":"ComboLEP-SL23","price":42.2,"currency_code":"EUR","in_stock":false},{"title":"Titebond Original Wood Glue D2 - 237ml (red)","offer_id":53012871840072,"sku":"ComboLEP-SL32","price":42.2,"currency_code":"EUR","in_stock":false},{"title":"Titebond II Premium Wood Glue D3 - 237ml (blue)","offer_id":53012871872840,"sku":"ComboLEP-SL45","price":42.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Kit_applicatori_colla_in_silicone_IGM_con_10_punte_e_vaschetta_abbinato_a_flacone_Titebond_vista_dall_alto.png?v=1777536442","url":"https:\/\/www.krollit.com\/products\/kit-applicatori-colla-silicone-igm-titebond","provider":"Krollit","version":"1.0","type":"link"}