{"product_id":"kit-pennelli-colla-silicone-igm-titebond","title":"IGM Silicone glue brush kit with Titebond glue of your choice","description":"\u003cp\u003e\u003cstrong\u003eIGM silicone glue brush kit – 13 and 24 mm brushes, serrated spatula and tray, with Titebond glue of your choice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IGM silicone glue brush kit is a hobby-professional accessory consisting of two 13 mm and 24 mm silicone brushes, a silicone spatula with a serrated edge for flat surfaces and tenons, and a silicone tray with front notches for collecting excess glue. The plastic handle is 40 mm long to reach deep mortises and dovetail joints. Available in a combo with Titebond glue of your choice: Original D2, II Premium D3, or III Ultimate D4. Distributed in Italy by Krollit, official IGM and Titebond distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm silicone brush: for large surfaces and panels\u003c\/li\u003e\n\u003cli\u003e13 mm silicone brush: for narrow surfaces, mortises, and dovetail joints\u003c\/li\u003e\n\u003cli\u003eBrush handle length: 40 mm\u003c\/li\u003e\n\u003cli\u003eSilicone spatula with serrated edge: for flat surfaces, flat tenons, and uniform distribution\u003c\/li\u003e\n\u003cli\u003eSilicone tray with front notches: for collecting excess glue and resting brushes\u003c\/li\u003e\n\u003cli\u003eMaterial: silicone (tips, spatula, tray) + plastic (handle)\u003c\/li\u003e\n\u003cli\u003eCleaning: lukewarm water or dry peeling\u003c\/li\u003e\n\u003cli\u003eGlue included: Titebond of your choice (selectable variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich Titebond glue to choose for your use\u003c\/h3\u003e\n\u003cp\u003eThe combo is available with three variants of Titebond glue. The choice depends on the application environment and the required water resistance.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eGlue\u003c\/th\u003e\n\u003cth\u003eEN 204 Class\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eOpen time\u003c\/th\u003e\n\u003cth\u003eMin. application temp.\u003c\/th\u003e\n\u003cth\u003eWhen to choose it\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTitebond Original\u003c\/td\u003e\n\u003ctd\u003eD2\u003c\/td\u003e\n\u003ctd\u003eIndoor only\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003ctd\u003e10°C\u003c\/td\u003e\n\u003ctd\u003eIndoor joinery, furniture, stairs, parquet: high initial tack, fast clamping, yellow color after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTitebond II Premium\u003c\/td\u003e\n\u003ctd\u003eD3\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003ctd\u003e13°C\u003c\/td\u003e\n\u003ctd\u003eWindow frames, outdoor furniture, structures exposed to occasional moisture: the only D3 single-color glue certified EN 204, compatible with RF and hot press systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTitebond III Ultimate\u003c\/td\u003e\n\u003ctd\u003eD4\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003ctd\u003emax 10 min\u003c\/td\u003e\n\u003ctd\u003e8°C\u003c\/td\u003e\n\u003ctd\u003eProlonged water exposure, cutting boards and food contact products, outdoor construction: mold, solvent and heat resistant, applicable at low temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eWho this kit is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eArtisanal carpenter assembling glued structures\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe 24 mm brush quickly covers large surfaces like side panels and shelves; the serrated spatula distributes glue in a uniform layer on flat tenons and tongue and groove joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyist with joining work on small pieces and deep mortises\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe 13 mm brush with a 40 mm handle reaches the bottom of mortises and dovetail joints where a standard brush cannot; the soft silicone leaves no bristle residue in the joint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse with two-component epoxy or polyurethane glues\u003c\/td\u003e\n\u003ctd\u003eNot indicated\u003c\/td\u003e\n\u003ctd\u003eSilicone brushes are designed for aqueous dispersions (PVA, alkyl resin); with expanding polyurethane or epoxy glues, cleaning with water is not effective and silicone can degrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e application of expanding polyurethane glues, two-component epoxy glues or solvent-based contact adhesives, as cleaning the silicone brushes with water is not feasible.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ch3\u003eIGM Brush Kit\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSilicone brush size 1\u003c\/td\u003e\n\u003ctd\u003e24 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSilicone brush size 2\u003c\/td\u003e\n\u003ctd\u003e13 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrush handle length\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpatula\u003c\/td\u003e\n\u003ctd\u003eSilicone with serrated and flat edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTray\u003c\/td\u003e\n\u003ctd\u003eSilicone with front notches for glue recovery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip and accessory material\u003c\/td\u003e\n\u003ctd\u003eSilicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandle material\u003c\/td\u003e\n\u003ctd\u003eFlexible plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning\u003c\/td\u003e\n\u003ctd\u003eLukewarm water or dry peeling after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTitebond Original – technical parameters (D2)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlkyl resin in aqueous dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater resistance class\u003c\/td\u003e\n\u003ctd\u003eD2 (EN 204)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eIndoor only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor after drying\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen time\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly time\u003c\/td\u003e\n\u003ctd\u003e10–15 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure time\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating and storage temperature\u003c\/td\u003e\n\u003ctd\u003e10°–24°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilutable with water\u003c\/td\u003e\n\u003ctd\u003eYes, up to 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTitebond II Premium – technical parameters (D3)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePVA glue in dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater resistance class\u003c\/td\u003e\n\u003ctd\u003eD3 (EN 204)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor after drying\u003c\/td\u003e\n\u003ctd\u003eYellow\/orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen time\u003c\/td\u003e\n\u003ctd\u003emax 5 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly time\u003c\/td\u003e\n\u003ctd\u003e10–15 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure time\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating and storage temperature\u003c\/td\u003e\n\u003ctd\u003e13°–24°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRF \/ hot press systems compatibility\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTitebond III Ultimate – technical parameters (D4)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAdvanced proprietary polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater resistance class\u003c\/td\u003e\n\u003ctd\u003eD4 (EN 204)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eIndoor and outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor after drying\u003c\/td\u003e\n\u003ctd\u003eLight brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen time\u003c\/td\u003e\n\u003ctd\u003emax 10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly time\u003c\/td\u003e\n\u003ctd\u003e20–25 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure time\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating and storage temperature\u003c\/td\u003e\n\u003ctd\u003e8°–24°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable for food contact\u003c\/td\u003e\n\u003ctd\u003eYes (cutting boards and similar products)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 handle with 24 mm silicone brush tip\u003c\/li\u003e\n\u003cli\u003e1 handle with 13 mm silicone brush tip\u003c\/li\u003e\n\u003cli\u003e1 silicone spatula with serrated and flat edge\u003c\/li\u003e\n\u003cli\u003e1 silicone tray with front notches\u003c\/li\u003e\n\u003cli\u003e1 bottle of Titebond glue (variant of your choice: Original D2, II Premium D3, III Ultimate D4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between the IGM brush kit and the IGM tip applicator kit for dowels and DOMINO?\u003c\/summary\u003e\n\u003cp\u003eThe brush kit is designed for flat surfaces, open mortises, and dovetail joints; the tip applicator kit is for cylindrical holes for 6–12 mm dowels and 6–10 mm DOMINO tenons.\u003c\/p\u003e\n\u003cp\u003eThe two kits are complementary: the 13 mm brush with a 40 mm handle fits into rectangular mortises and dovetail joints, while the cylindrical tips of the applicator kit distribute glue on the inner walls of circular holes where a flat brush cannot reach. Those who work with both dowels and open joints benefit from having both kits available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the serrated spatula in the IGM kit suitable for flat DOMINO tenons?\u003c\/summary\u003e\n\u003cp\u003eYes. The serrated edge of the spatula distributes glue in a uniform layer on the flat surface of the DOMINO tenon before insertion into its recess, avoiding accumulations that would cause excessive squeeze-out when the joint is closed.\u003c\/p\u003e\n\u003cp\u003eThe flat edge of the same tool is used to remove excess glue from the edges of the joint after closure, an operation that risks marking the wood with a metal spatula. The soft silicone slides on the surface without leaving scratches even on soft woods like poplar and linden.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the practical difference between Titebond II D3 and Titebond III D4 for outdoor joinery?\u003c\/summary\u003e\n\u003cp\u003eThe main difference is the degree of water resistance and open time: Titebond II D3 offers resistance to occasional moisture with an open time of 5 min; Titebond III D4 is waterproof with an open time of 10 min, suitable for prolonged water exposure.\u003c\/p\u003e\n\u003cp\u003eFor window frames and garden furniture exposed to rain but not immersion, Titebond II D3 is sufficient and more economical. Titebond III D4 is recommended for structural elements exposed to repeated wetting and drying cycles and for the production of cutting boards and tools in contact with food. The longer open time of III facilitates the assembly of complex structures with many simultaneous joints.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan Titebond III D4 be used for cutting boards and food contact items?\u003c\/summary\u003e\n\u003cp\u003eYes. Titebond III Ultimate meets European requirements for food contact and is indicated by the manufacturer for the production of cutting boards and similar products, once fully cured (24 hours).\u003c\/p\u003e\n\u003cp\u003eTitebond Original D2 and Titebond II D3 do not have this specification: for cutting boards and wooden kitchen utensils, Titebond III is the correct choice within this combo. The dry joint is resistant to washing with water, a crucial condition for cutting boards subjected to frequent cleaning.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you clean the silicone brushes in the IGM kit after use?\u003c\/summary\u003e\n\u003cp\u003eThe brushes should be washed with lukewarm water immediately after use. If the glue has dried, the silicone allows it to be peeled off without solvents.\u003c\/p\u003e\n\u003cp\u003eThe silicone tray allows excess glue to be poured back into the original bottle using the front notches as a spout. The brushes can be rested on the same notches during breaks to prevent the tip from touching the work surface. Do not use this kit with polyurethane or epoxy glues: cleaning in those cases is not feasible with water.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Titebond","offers":[{"title":"Titebond III Ultimate Wood Glue D4 - 237ml (green)","offer_id":53014058598728,"sku":"ComboLEP-SL18","price":22.18,"currency_code":"EUR","in_stock":true},{"title":"Titebond Original Wood Glue D2 - 237ml (red)","offer_id":53014058631496,"sku":"ComboLEP-SL28","price":22.18,"currency_code":"EUR","in_stock":true},{"title":"Titebond II Premium Wood Glue D3 - 237ml (blue)","offer_id":53014058664264,"sku":"ComboLEP-SL38","price":22.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Kit_pennelli_colla_in_silicone_IGM_con_pennelli_13_e_24_mm_spatola_dentata_e_vaschetta_vista_dall_alto.png?v=1777544438","url":"https:\/\/www.krollit.com\/products\/kit-pennelli-colla-silicone-igm-titebond","provider":"Krollit","version":"1.0","type":"link"}