Laguna Bandsaw Blade 2946mm - 13 x 0.65mm 6TPI is a professional cutting tool available from Krollit, an official Laguna distributor since 2007.
- Blade length: 2946 mm
- Blade width: 13 mm
- Blade thickness: 0.65 mm
- Teeth per inch (TPI): 6
- Cutting height: 3–20 mm
- Compatibility: HOLZMANN HBS 400, LAGUNA 1412, LAGUNA 14BX
Who uses the 2946mm - 13 x 0.65mm 6TPI Bandsaw Blade and for what purpose
Mechanical workshops and tool laboratories use the 2946mm - 13 x 0.65mm 6TPI Bandsaw Blade for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
The Laguna Bandsaw Blade 2946mm - 13 x 0.65mm 6TPI is part of Laguna's range of cutting tools, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 2946mm - 13 x 0.65mm 6TPI Bandsaw Blade for?
The 2946mm - 13 x 0.65mm 6tpi bandsaw blade is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the indicated machine.
-
Out-of-spec materials: verify workable material and tool geometry before use.
Technical specifications
| Blade length |
2946 mm |
| Blade width |
13 mm |
| Blade thickness |
0.65 mm |
| Teeth per inch (TPI) |
6 |
| Cutting height |
3–20 mm |
| Compatibility |
HOLZMANN HBS 400, LAGUNA 1412, LAGUNA 14BX |
| Tooth type |
REGULAR |
Frequently asked questions
Which bandsaw is this blade compatible with?
It is specific for the Laguna 14|12 bandsaw (with a blade travel of 2946 mm).
Verify the blade travel (closed band length) of your saw before purchasing. The length is indicated in the machine manual or stamped on the existing blade.
What is 6 TPI grit used for?
Suitable for general-purpose cutting of dry and hard wood, 10-25 mm thick.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for cleaner but slower finishes. The choice depends on the material thickness.
What can be cut with a 13 mm width?
It is suitable for medium curved cuts with a radius of up to 65 mm.
The width determines the minimum cutting radius: for wood with a 13 mm width, the approximate radius is 65 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Wear indicators: wood burning during cutting, deviation of the cutting line (the blade "runs away"), altered noise, presence of smoke. Average lifespan: 40-100 cutting hours for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crookedly and break due to fatigue; blades that are too tight break due to mechanical tension. Tension should be checked cold after 5 minutes of operation: if the noise changes significantly, recheck.
