The Laguna 2946mm - 6 x 0.65mm 4Tpi bandsaw blade is a professional cutting tool available at Krollit, an official Laguna distributor since 2007.
- Blade length: 2946 mm
- Blade width: 6 mm
- Blade thickness: 0.65 mm
- Teeth per inch (TPI): 4
- Material: Hardened carbon steel
- Cutting height: 20 – 80 mm
Who uses the 2946mm - 6 x 0.65mm 4Tpi bandsaw blade and for what purpose
Machine shops and tool workshops use the 2946mm - 6 x 0.65mm 4Tpi bandsaw blade for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
The Laguna 2946mm - 6 x 0.65mm 4Tpi bandsaw blade is part of the Laguna range of cutting tools, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for assistance with selection.
Krollit Logistics and Support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 2946mm - 6 x 0.65mm 4Tpi bandsaw blade for?
The 2946mm - 6 x 0.65mm 4tpi bandsaw blade is recommended for the following professional profiles:
-
Machine shops and tool workshops: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement part or original tool for the indicated machine.
-
Out-of-specification materials: check workable material and tool geometry before use.
Technical specifications
| Blade length |
2946 mm |
| Blade width |
6 mm |
| Blade thickness |
0.65 mm |
| Teeth per inch (TPI) |
4 |
| Material |
Hardened carbon steel |
| Cutting height |
20 – 80 mm |
| Compatibility |
HOLZMANN HBS 400, LAGUNA 1412, LAGUNA 14BX |
| Tooth type |
SKIP |
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specifically for the Laguna 14|12 bandsaw (with a blade stroke of 2946 mm).
Check the blade stroke (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded onto the existing blade.
What is 4 TPI grit used for?
Suitable for general-purpose cutting on dry and hard wood, thicknesses 10-25 mm.
General rule: Low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for cleaner finishes but slower. The choice depends on the material thickness.
What can be cut with a 6 mm width?
It is suitable for curved and contour cuts with minimal radii (Ø 3-10 mm).
The width determines the minimum cutting radius: for wood with a 6 mm width, the approximate radius is 30 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows signs of burning, or requires more pressure. Bandsaw blades are not sharpened; they are replaced.
Indicators of wear: burning of the wood during cutting, deviation of the cutting line (the blade "runs off"), altered noise, presence of smoke. Average service life: 40-100 hours of cutting for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; blades that are too tight break due to mechanical stress. Tension should be checked cold after 5 minutes of work: if the noise changes significantly, recheck.
