Laguna Bandsaw Blade 3670mm - 10 x 0.65mm 6TPI is a professional cutting tool available on Krollit, an official Laguna distributor since 2007.
- Blade length: 3670 mm
- Blade width: 10 mm
- Blade thickness: 0.65 mm
- Teeth per inch (TPI): 6
- Cutting height: 3–20 mm
- Compatibility: LAGUNA 18BX
Who uses the 3670mm - 10 x 0.65mm 6TPI Bandsaw Blade and for what
Mechanical workshops and tool laboratories use the 3670mm - 10 x 0.65mm 6TPI Bandsaw Blade for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
The Laguna Bandsaw Blade 3670mm - 10 x 0.65mm 6TPI is part of the Laguna range of cutting tools, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping within 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 3670mm - 10 x 0.65mm 6TPI Bandsaw Blade for?
The 3670mm - 10 x 0.65mm 6TPI bandsaw blade is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the indicated machine.
-
Out-of-spec materials: check workable material and tool geometry before use.
Technical specifications
| Blade length |
3670 mm |
| Blade width |
10 mm |
| Blade thickness |
0.65 mm |
| Teeth per inch (TPI) |
6 |
| Cutting height |
3–20 mm |
| Compatibility |
LAGUNA 18BX |
| Tooth type |
REGULAR |
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specific for the Laguna 18|BX bandsaw (with a blade length of 3670 mm).
Check the blade length (closed band length) of your saw before purchasing. The length is indicated in the machine manual or stamped on the existing blade.
What is 6 TPI grit used for?
Suitable for general-purpose cutting on dry, hard wood, thicknesses 10-25 mm.
General rule: Low TPI (2-4) for aggressive and fast cuts; High TPI (6-14) for clean finishes but slower. The choice depends on the material thickness.
What can be cut with a 10 mm width?
It is suitable for medium curved cuts with a radius up to 65 mm.
The width determines the minimum cutting radius: for wood with a 10 mm width, the approximate radius is 50 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Indicators of wear: burning of the wood during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average useful life: 40-100 hours of cutting for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; too tight blades break due to mechanical tension. Tension should be checked cold after 5 minutes of operation: if the noise changes significantly, recheck.
