The Laguna Bandsaw Blade 3670mm - 19 x 0.8mm 2TPI is a professional cutting tool available from Krollit, an official Laguna distributor since 2007.
- Blade length: 3670 mm
- Blade width: 19 mm
- Blade thickness: 0.8 mm
- Teeth per inch (TPI): 2
- Cutting height: 40–200 mm
- Compatibility: LAGUNA 18BX
Who uses the Bandsaw Blade 3670mm - 19 x 0.8mm 2TPI and for what purpose
Mechanical workshops and tool laboratories use the Bandsaw Blade 3670mm - 19 x 0.8mm 2TPI for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
The Laguna Bandsaw Blade 3670mm - 19 x 0.8mm 2TPI is part of Laguna's range of cutting tools, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performance levels. To choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Shipping 3-5 working days from Krollit warehouse for spare parts and accessories. Italian-speaking customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the Bandsaw Blade 3670mm - 19 x 0.8mm 2TPI for
The Bandsaw Blade 3670mm - 19 x 0.8mm 2TPI is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement part or original tool for the specified machine.
-
Materials outside specifications: verify workable material and tool geometry before use.
Technical specifications
| Blade length |
3670 mm |
| Blade width |
19 mm |
| Blade thickness |
0.8 mm |
| Teeth per inch (TPI) |
2 |
| Cutting height |
40–200 mm |
| Compatibility |
LAGUNA 18BX |
| Tooth type |
Hook |
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specific to the Laguna 18|BX bandsaw (with a blade stroke of 3670 mm).
Check the blade stroke (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded on the existing blade.
What is 2 TPI grit used for?
Suitable for coarse cuts on thick materials (25-100 mm), green wood, and preliminary turning.
General rule: Low TPI (2-4) for aggressive and fast cuts; High TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a 19 mm width?
It is suitable for mixed straight and curved cuts with a radius up to 100 mm.
The width determines the minimum cutting radius: for wood with a 19 mm width, the approximate radius is 95 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when the cut becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened; they are replaced.
Indicators of wear: wood burning during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average lifespan: 40-100 hours of cutting for standard blades.
How do you tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the primary cause of premature breakage.
Blades that are too loose cut crookedly and break due to fatigue; blades that are too tight break due to mechanical tension. Tension should be checked cold after 5 minutes of operation: if the noise changes significantly, recheck.
