Laguna Bandsaw Blade 3670mm - 20 x 0.6mm 1.5-2Tpi is a professional cutting tool available from Krollit, official Laguna distributor since 2007.
- Compatibility: LAGUNA 18BX Bandsaw
- Blade Length: 3670 mm
- Blade Width: 20 mm
- Blade Thickness: 0.6 mm
- Teeth Pitch (TPI): 1.5 - 2
- Cutting Height: Up to 200 mm
Who uses the 3670mm - 20 x 0.6mm 1.5-2Tpi Bandsaw Blade and for what
Mechanical workshops and tool shops use the 3670mm - 20 x 0.6mm 1.5-2Tpi Bandsaw Blade for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
Laguna Bandsaw Blade 3670mm - 20 x 0.6mm 1.5-2Tpi is part of the Laguna range of cutting tools, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 3670mm - 20 x 0.6mm 1.5-2Tpi Bandsaw Blade for
The 3670mm - 20 x 0.6mm 1.5-2Tpi bandsaw blade is recommended for the following professional profiles:
-
Mechanical workshops and tool shops: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the indicated machine.
-
Out-of-spec materials: verify workable material and tool geometry before use.
Technical specifications
| Compatibility |
LAGUNA 18BX Bandsaw |
| Blade Length |
3670 mm |
| Blade Width |
20 mm |
| Blade Thickness |
0.6 mm |
| Teeth Pitch (TPI) |
1.5 - 2 |
| Cutting Height |
Up to 200 mm |
| Cutting Kerf |
Approx. 1.2 mm |
| Tooth Type |
Carbide |
| Recommended Use |
Cutting hardwood, softwood, exotic wood |
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specific for the Laguna 18|BX bandsaw (with a blade length of 3670 mm).
Check the blade length (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded on the existing blade.
What is 5-2 TPI grit used for?
Suitable for versatile cutting of dry and hard wood, thicknesses 10-25 mm.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a 20 mm width?
It is suitable for straight cuts and ripping with maximum stability (not suitable for tight curves).
The width determines the minimum cutting radius: for wood with a 20 mm width, the approximate radius is 100 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Indicators of wear: wood burning during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average useful life: 40-100 hours of cutting for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; too tight blades break due to mechanical tension. Tension should be checked cold after 5 minutes of operation: if the noise changes significantly, recheck.
