The Laguna Bandsaw Blade 3670mm - 25 x 0.9mm 6TPI is a professional-grade cutting tool available from Krollit, an official Laguna distributor since 2007.
- Blade length: 3670 mm
- Blade width: 25 mm
- Blade thickness: 0.9 mm
- Teeth per inch (TPI): 6
- Cutting height: 3–20 mm
- Compatibility: LAGUNA 18BX
Who uses the Bandsaw Blade 3670mm - 25 x 0.9mm 6TPI and for what purpose
Machine shops and tool workshops use the Bandsaw Blade 3670mm - 25 x 0.9mm 6TPI for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
The Laguna Bandsaw Blade 3670mm - 25 x 0.9mm 6TPI is part of the Laguna cutting tool range, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the Bandsaw Blade 3670mm - 25 x 0.9mm 6TPI for?
The Bandsaw Blade 3670mm - 25 x 0.9mm 6TPI is recommended for the following professional profiles:
-
Machine shops and tool workshops: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement part or original tool for the specified machine.
-
Out-of-specification materials: verify workable material and tool geometry before use.
Technical specifications
| Blade length |
3670 mm |
| Blade width |
25 mm |
| Blade thickness |
0.9 mm |
| Teeth per inch (TPI) |
6 |
| Cutting height |
3–20 mm |
| Compatibility |
LAGUNA 18BX |
| Tooth type |
REGULAR |
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specifically for the Laguna 18|BX bandsaw (with a blade length of 3670 mm).
Please check your saw's blade length (closed blade length) before purchasing. The length is indicated in the machine manual or welded onto the existing blade.
What is 6 TPI grit used for?
Suitable for versatile cutting on dry and hard wood, thicknesses 10-25 mm.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a 25 mm width?
It is suitable for straight cuts and resawing with maximum stability (not suitable for tight curves).
The width determines the minimum cutting radius: for wood with a width of 25 mm, the approximate radius is 125 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Indicators of wear: wood burning during cutting, deviation of the cutting line (the blade "runs away"), altered noise, presence of smoke. Average lifespan: 40-100 cutting hours for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crookedly and break due to fatigue; blades that are too tight break due to mechanical tension. Tension should be checked cold after 5 minutes of operation: if the noise changes significantly, recheck.
