The Laguna Bandsaw Blade 3670mm - 27 x 0.9mm 2TPI is a cutting tool for professional use available at Krollit, an official Laguna distributor since 2007.
- Blade length: 3670 mm
- Blade width: 27 mm
- Blade thickness: 0.9 mm
- Teeth per inch (TPI): 2
- Cutting height: 40–200 mm
- Compatibility: LAGUNA 18BX
Who uses the Bandsaw Blade 3670mm - 27 x 0.9mm 2TPI and for what purpose
Mechanical workshops and tool labs use the Bandsaw Blade 3670mm - 27 x 0.9mm 2TPI for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
The Laguna Bandsaw Blade 3670mm - 27 x 0.9mm 2TPI is part of Laguna's range of cutting tools, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performances: to choose the machine suitable for your use case, you can consult the Laguna catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the Bandsaw Blade 3670mm - 27 x 0.9mm 2TPI for?
The bandsaw blade 3670mm - 27 x 0.9mm 2tpi is recommended for the following professional profiles:
-
Mechanical workshops and tool labs: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the indicated machine.
-
Out-of-spec materials: check workable material and tool geometry before use.
Technical specifications
| Blade length |
3670 mm |
| Blade width |
27 mm |
| Blade thickness |
0.9 mm |
| Teeth per inch (TPI) |
2 |
| Cutting height |
40–200 mm |
| Compatibility |
LAGUNA 18BX |
| Tooth type |
Hook |
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specifically for the Laguna 18|BX bandsaw (with a blade stroke of 3670 mm).
Check the blade stroke (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded on the existing blade.
What is 2 TPI grit used for?
Suitable for coarse cuts on thick materials (25-100 mm), green wood, and preliminary turning.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a width of 27 mm?
It is suitable for straight cuts and ripping with maximum stability (not suitable for tight curves).
The width determines the minimum cutting radius: for wood with a width of 27 mm, the approximate radius is 135 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Wear indicators: burning of wood during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average lifespan: 40-100 cutting hours for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; too tight and they break due to mechanical tension. Tension should be checked cold after 5 minutes of work: if the noise changes significantly, recheck.
