The Flott BSM 150 is a professional belt sander, weighing 90 kg. Krollit, official Flott distributor since 2007.
- Belt size: 2000 x 150 mm
- Sanding area: 600 mm
- Belt speed: 30 m/s
- Motor: 3.75 kW – 400 V three-phase
- Weight: 90 kg
- Dimensions without VP: 1100 x 550 x 1035 mm
Who uses the BSM 150 and for what
Mechanical workshops and metalworking shops use the BSM 150 for sanding and satin finishing stainless steel, aluminum, and alloys, including deburring and surface finishing.
Its place in the Flott range
The Flott BSM 150 is part of the Flott belt sander range, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Italian-speaking customer support available for technical documentation, product sheets, and spare part order management. Krollit has been an official distributor since 2007.
Who the BSM 150 is for
The BSM 150 is recommended for the following professional profiles:
-
Mechanical workshops for metal finishing: sanding and satin finishing of stainless steel, aluminum, and alloys.
-
Metalworking shops and production laboratories: burr removal, cutting deburring, and surface finishing.
Not suitable for: mirror polishing chrome (dedicated polishing machines with abrasive pastes are needed for final chrome finishes).
Technical specifications
| Belt size |
2000 x 150 mm |
| Sanding area |
600 mm |
| Belt speed |
30 m/s |
| Motor |
3.75 kW – 400 V three-phase |
| Weight |
90 kg |
| Dimensions without VP |
1100 x 550 x 1035 mm |
| Dimensions with VP |
800 x 600 x 1450 mm |
| Motor warranty |
5 years (single shift) |
Frequently asked questions
What can the BSM 150 sand?
Stainless steel, aluminum, metal alloys, and (in some models) even wood with appropriate abrasive belts.
For each material, a specific belt grit is used: 60-80 for roughing, 120-180 for finishing, 240+ for pre-polishing.
What abrasive belt dimensions does it use?
See "Belt size" in the technical table: typically from 75x2,000 mm to 150x2,500 mm.
Belts are consumable spare parts: Krollit supplies original Bernardo belts in various grit sizes to optimize the finish.
Is the belt speed adjustable?
Professional models offer Vario or multi-step speeds (typically 4-8 steps).
High speeds (>20 m/s) for stainless steel and finishing, low speeds (<10 m/s) for wood and soft materials to avoid burning.
Does it have integrated dust extraction?
Professional models offer dust extraction ports for grinding dust.
Dust extraction is essential for stainless steel (respirable dust) and for wood (fire risk from sparks). Check the connection diameter for linking to a central system.
How much does the machine weigh?
See "Weight" in the technical table: typically 50-200 kg for benchtop and pedestal models.
Pedestal models require floor mounting, while benchtop models are installed on a sturdy bench of adequate size.
