The Flott BSM 75 is a professional-grade belt sander, weighing 80 kg. Krollit has been an official Flott distributor since 2007.
- Belt dimensions: 2000 x 75 mm
- Sanding area: 600 mm
- Belt speed: 30 m/s
- Sander motor: 3.75 kW
- Weight: 80 kg
- Dimensions with VP: 800 × 600 × 1450 mm
Who uses the BSM 75 and for what purpose?
Mechanical workshops and metalworking shops use the BSM 75 for sanding and satin finishing stainless steel, aluminum, and alloys, removing burrs and finishing surfaces.
Its place in the Flott range
The Flott BSM 75 is part of the Flott belt sander range, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for assistance in selection.
Krollit Logistics and Support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the BSM 75 for?
The BSM 75 is recommended for the following professional profiles:
-
Mechanical workshops for metal finishing: sanding and satin finishing of stainless steel, aluminum, and alloys.
-
Metalworking shops and production laboratories: deburring, removing cutting burrs, and surface finishing.
Not suitable for: mirror polishing chrome (dedicated polishing machines with abrasive pastes are needed for final chrome finishes).
Table, dimensions and geometry
| Belt dimensions |
2000 x 75 mm |
| Weight |
80 kg |
| Dimensions with VP |
800 × 600 × 1450 mm |
Motor and power supply
| Sander motor |
3.75 kW |
| Motor warranty |
5 years |
| Vacuum motor |
, |
Other specifications
| Sanding area |
600 mm |
| Dust extraction system |
No |
| Suction capacity |
, |
| Belt speed |
30 m/s |
Frequently Asked Questions
What can the BSM 75 sand?
Stainless steel, aluminum, metal alloys, and (in some models) even wood with appropriate abrasive belts.
For each material, a specific belt grit is used: 60-80 for roughing, 120-180 for finishing, 240+ for pre-polishing.
What abrasive belt sizes does it use?
See "Belt dimensions" in the technical table: typically from 75x2,000 mm to 150x2,500 mm.
Belts are consumable spare parts: Krollit supplies original Bernardo belts in various grit sizes to optimize the finish.
Is the belt speed adjustable?
Professional models offer variable or multi-step speeds (typically 4-8 steps).
High speeds (>20 m/s) for stainless steel and finishing, low speeds (<10 m/s) for wood and soft materials to avoid burning.
Does it have integrated dust extraction?
Professional models offer a dust extraction connection for grinding dust.
Dust extraction is essential for stainless steel (respirable dust) and wood (fire risk from sparks). Check the connection diameter for connection to a centralized system.
How much does the machine weigh?
See "Weight" in the technical table: typically 50-200 kg for bench and pillar models.
Pillar models require floor mounting, while bench models are installed on a sturdy bench of adequate size.
