The Krollit 2946mm carbide bandsaw blade - 20 x 0.6mm 1.5-2 (Tpi) is a professional cutting tool available from Krollit, the official Krollit distributor since 2007.
- Vendor: Krollit
- Model: 2946mm carbide bandsaw blade - 20 x 0.6mm 1.5-2 (Tpi)
- Official Bernardo distributor since 2007
- Shipping from Krollit warehouse
Who uses the 2946mm carbide bandsaw blade - 20 x 0.6mm 1.5-2 (Tpi) and for what purpose
Mechanical workshops and tool shops use the 2946mm carbide bandsaw blade - 20 x 0.6mm 1.5-2 (Tpi) for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Krollit range
The Krollit 2946mm carbide bandsaw blade - 20 x 0.6mm 1.5-2 (Tpi) is part of the Krollit cutting tool range, distributed in Italy by Krollit since 2007. The Krollit range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Krollit catalog on Krollit or contact customer support for assistance in selection.
Krollit Logistics and Support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 2946mm carbide bandsaw blade - 20 x 0.6mm 1.5-2 (Tpi) for
The 2946mm carbide bandsaw blade - 20 x 0.6mm 1.5-2 (tpi) is recommended for the following professional profiles:
-
Mechanical workshops and tool shops: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement part or original tool for the indicated machine.
-
Out-of-specification materials: check machinable material and tool geometry before use.
Frequently asked questions
Which bandsaw is this blade compatible with?
It is specifically for the Laguna 14|12 bandsaw (with a 2946 mm blade length).
Check the blade length (closed belt length) of your saw before purchasing. The length is indicated in the machine manual or welded onto the existing blade.
Which TPI should I choose?
Suitable for cuts with the number of teeth per inch indicated in the title.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a 20 mm width?
It is suitable for straight cuts and resawing with maximum stability (not suitable for tight curves). The carbide blade has brazed teeth with very high hardness: superior durability on hardwood and abrasive materials.
The width determines the minimum cutting radius: for wood with a 20 mm width, the approximate radius is 100 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when the cut becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Wear indicators: wood burning during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average lifespan: 40-100 hours of cutting for standard blades.
How do you tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crookedly and break due to fatigue; blades that are too tight break due to mechanical stress. Tension should be checked cold after 5 minutes of work: if the noise changes significantly, recheck.
