Güde 68 kg Plasterboard Lifter – 3350 mm Height, Manual Crank, 1220 × 2800 mm Platform
The plasterboard lifter is a specialized tool for installing plasterboard (drywall) sheets on walls and ceilings. Unlike manual installation (2-3 people supporting the panel), the lifter allows precise lifting + positioning by a single person using a manual pump.
The Güde GTL-335 model is an intermediate size: 68 kg capacity (covers standard 1220 × 2500 mm plasterboard up to 60 kg), maximum height 3350 mm (reaches residential and light ceilings), simple and reliable manual crank.
Lifting and positioning mechanics:
-
68 kg capacity – Covers standard plasterboard sheets up to 60 kg. Safety margin for water-resistant plasterboard and lightweight composite panels.
-
Adjustable height 1400-3350 mm – 1950 mm range allows lifting from the work surface (1400 mm) up to residential ceilings (3350 mm). Precise for ceilings of different heights.
-
1220 × 2800 mm platform – Optimized dimensions for standard 1220 × 2500 mm plasterboard sheets. Wide base provides absolute stability.
-
Tilt angle 0-60° – Adjustment from vertical (0°) to tilted 60° facilitates precise positioning on the wall. Angle allows alignment with existing structures.
-
Manual pump with crank – Integrated lever lifts effortlessly. Smooth height control during installation.
-
3 swivel casters with brakes – Agile mobility between workstations. Brake locks the trolley during work.
-
Triple extension – 3 adjustable positions (125/235/296 cm) to adapt to different wall lengths.
-
Stop shoulders – Prevents the panel from slipping down during lifting.
Who chooses it:
-
Tradespeople and companies specialized in plasterboard – Installation of plasterboard walls and false ceilings. The lifter is a standard tool that reduces labor (1 person vs. 3 people).
-
Restorers and maintenance workers – Repair and replacement of damaged panels in residential buildings. 3350 mm height reaches typical ceilings.
-
Small construction sites and light construction – Installation of internal partition walls, plasterboard linings. Maneuverability facilitates work in confined spaces.
-
Building renovation companies – Renovation of residential interiors with plasterboard. The lifter speeds up work cycles.
Who chooses it in Italy
Specialized companies – Standard for companies operating with plasterboard systems (walls, false ceilings, window frames). The lifter reduces labor from 3 to 1 person. The 3350 mm height covers almost all residential ceilings (typically 2700-3200 mm).
Tradespeople and masons doing building maintenance – Repair of damaged plasterboard panels in residential buildings. The lifter facilitates work in confined spaces in apartments.
Building renovation sites – Interior renovation with plasterboard (new partitions, false ceilings, internal insulation). The lifter is an investment that speeds up cycles and reduces labor costs.
After-sales support and accessory compatibility
Krollit provides original Güde spare parts for the plasterboard lifter with average delivery times of 5-7 working days:
- Specific hydraulic oil (for manual pump, 1-2 liters)
- Replacement rubber stopper (if worn from intense cycles)
- Replacement swivel wheel (if damaged)
- Replacement crank (if broken)
- Manual in Italian and technical data sheet available in PDF
Who is the Güde 68 kg plasterboard lifter suitable for?
| Profile |
Suitable? |
Reason |
| Single craftsman / small team |
Ideal |
Reduces labor from 3 to 1 person. 3350 mm height covers residential ceilings. Simple and reliable manual crank. |
| Company specialized in plasterboard |
Ideal |
Standard tool for plasterboard installation. 68 kg capacity covers standard panels. Triple extension suitable for different wall lengths. |
| Building renovation site |
Adequate |
For frequent plasterboard operations (>50 panels/month), the lifter speeds up cycles. For occasional operations, rental is more convenient. |
Not suitable for: Specialized panels >70 kg (choose a model with higher capacity); very high ceilings >3400 mm (max height is limit); impromptu single installations (cost not justified for 1-2 panels).
Technical specifications
Capacity and lifting heights
| Maximum capacity |
68 kg |
| Minimum height (lowered) |
1400 mm |
| Maximum height (extended) |
3350 mm |
| Lifting stroke |
1950 mm |
| Tilt angle |
0-60 degrees (adjustable) |
Platform and support
| Platform length |
2800 mm |
| Platform width |
1220 mm |
| Suitable panels (max) |
3000 × 1250 mm |
| Platform material |
Commercial grade steel |
| Stop shoulders |
Integrated, prevent panel slipping |
| Rubber pads |
High quality for panel grip |
Lifting system
| Pump type |
Manual pump with integrated crank |
| Mechanism |
Hydraulic cylinder with fluid control |
| Hydraulic oil |
H ISO VG 46 recommended (capacity: 1-2 liters) |
| Height control |
Crank for precise lifting/lowering |
| Safety system |
Automatic position lock – does not fall under pressure |
Mobility and transport
| Number of wheels |
3 swivel casters |
| Wheel type |
Polyurethane (PU), 5 inches diameter |
| Braking system |
Foot brake on all wheels |
| Dimensions (closed) |
Approx. 2800 × 1220 × 1400 mm |
| Weight |
36 kg net / 39.5 kg gross |
Compliance
- CE – Machinery Directive 2006/42/EC
- Complies with European safety standards for construction equipment
- Suitable for professional use in Italy
Standard equipment
- GTL-335 plasterboard lifter complete
- 1220 × 2800 mm steel platform
- Manual pump with integrated crank
- 3 polyurethane swivel casters with brakes
- Integrated stop shoulders
- High-quality rubber pads
- Triple extension (125/235/296 cm)
- Hydraulic cylinder with safety lock
- Manual in German
- Technical data sheet
Frequently Asked Questions
What is the maximum load the lifter can support?
68 kg. Do not exceed this load to avoid damage to the hydraulic cylinder and locking system. For standard plasterboard (1220 × 2500 mm, approximately 50-60 kg), the lifter is suitable. For specialized panels >70 kg (double plasterboard), choose a model with higher capacity.
Can I lift plasterboard to the ceiling by myself?
Yes. A maximum height of 3350 mm reaches typical residential ceilings (2700-3200 mm). With a manual crank, the operation requires moderate force (50 kg of effort on the crank to lift a 68 kg load - mechanical factor ~1.3). One person can operate comfortably.
How long does it take to lift plasterboard to 3000 mm?
Not declared by the manufacturer. In practice, 30-45 seconds from the minimum position (1400 mm) to the maximum (3350 mm) with a 60 kg load. Speed depends on the pumping cadence (crank). Always control movement – do not rush.
Is the 0-60° tilt angle necessary?
Yes. The 0° angle (vertical) is the standard position for sheets on a wall. The 60° angle tilts the panel downwards to facilitate insertion onto an already partially clad wall or for alignment on irregular structures.
Do the wheels with brakes stay still during work?
Yes. The brake locks all 3 wheels – the lifter does not move during panel positioning. After installation, release the brake to move to the next workstation.
Can I use the lifter for OSB panels or plywood?
Yes. High-quality rubber pads provide grip on any construction material. Lightweight OSB and plywood panels (up to 50 kg for standard sheets) are easily managed.
What maintenance does the lifter require?
Minimal. Monthly inspection: check oil pressure (should be fluid), rubber pad integrity, functioning brake. Oil change recommended every 12 months if moderate use (<50 panels/month). Lubricate wheels every 6 months with spray (WD-40).
Can I rent the lifter instead of buying it?
Yes, many construction rental companies offer this model (typical rates 15-25 euros/day in Italy). If plasterboard operations are >100 panels/year, purchasing is convenient. For occasional renovations, rental is an economical option.
