Fixed bezel Profi 400 V

A steady rest is a support that is fixed to the lathe bed and supports long or heavy workpieces during machining, preventing bending and vibrations. It is essential when the length-to-diameter ratio of the workpiece exceeds 4:1 (for a fixed steady rest) or 10:1 (for a traveling steady rest that accompanies the tool). Without a steady rest, long workpieces will bend under cutting force, producing taper, vibrations, and non-cylindrical surfaces.

A fixed steady rest is locked onto the lathe bed in a fixed position and supports the workpiece at a specific point. A traveling steady rest (or follow rest) is attached to the longitudinal carriage and accompanies the tool during movement — it always supports the workpiece at the same point relative to the tool, eliminating bending during feed. A traveling steady rest is necessary for turning very long workpieces where a fixed steady rest is not sufficient.

Each Bernardo steady rest is designed for the models indicated in the title. The workpiece diameter range (e.g., 50–590 mm) indicates the supportable workpieces. Verify that your lathe model matches the one indicated. Customer support in Italian available.

The steady rest must be centered with respect to the lathe axis: mount the workpiece between centers, rest the steady rest jaws on the ground diameter or on an already turned area (not on the rough stock) and adjust the jaws until light contact is made. Lubricate the jaws with cutting oil or grease to reduce wear. Do not tighten the jaws with force — they should support the workpiece without clamping it.

Original spare parts available with 3–5 business days shipping. Customer support in Italian available.