{"product_id":"macchine-mobili-per-lincollaggio-dei-bordi-peb-300-s","title":"Bernardo PEB 300 S Portable Edgebander – Complete kit, edge thickness 0.3-3 mm, height 10-65 mm","description":"\u003cp\u003eThe professional portable edgebander kit Bernardo PEB 300 S applies ABS, PVC, melamine, and veneered edges to straight and shaped panels with thicknesses of 0.3-3.0 mm and heights of 10-65 mm, minimum internal radius 25 mm, feed rate 4 m\/min, 855 W motor, heating time 4 minutes at 120°C, glue pot capacity 400 ml. Complete kit includes edgebander, edge trimmer KG 60 Duo, 0.8 kg glue pellets, VH 03 vacuum clamping set, KF 80 electric edge milling machine, 3 cases, support trolley. Edgebander weight 8 kg. Made in Austria, distributed in Italy by Krollit as official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge thickness (PVC\/ABS):\u003c\/strong\u003e 0.3 – 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkable edge height:\u003c\/strong\u003e 10 – 65 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum internal radius:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed rate:\u003c\/strong\u003e 4 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating time:\u003c\/strong\u003e 4 min at 120°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 855 W – 230V single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdgebander weight:\u003c\/strong\u003e 8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the PEB 300 S and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo PEB 300 S is a complete professional portable edgebander kit for applying ABS, PVC, melamine, and veneered edges to straight and shaped panels. The adjustable guiding system handles edges from 0.3 to 3.0 mm thick and heights from 10 to 65 mm, covering virtually the entire range of standard edges used in furniture production. Direct glue application to the edge (instead of the panel) eliminates the need to purchase pre-glued edges, significantly reducing operating costs. The complete kit includes the edgebander, a double edge trimmer (KG 60 Duo), VH 03 vacuum clamping set, KF 80 electric milling machine for finishing, 0.8 kg glue pellets, 3 transport cases, and a support trolley. In Krollit customers' workshops, it is chosen by artisan joineries, furniture manufacturers, custom kitchen manufacturers, and workshops that work with shaped panels where stationary edgebanders cannot operate.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eIn the Bernardo edgebander range, the PEB 300 S is the professional entry-level portable kit. Above it, the PEB 500 V-S (complete professional kit) adds continuous feed speed adjustment (2-6 m\/min vs 4 m\/min fixed for the 300 S), digital temperature adjustment (exact setting vs 120-200°C preset), and additional accessories. The practical difference between the PEB 300 S and PEB 500 V-S is seen in production: the 500 V-S allows adjusting speed and temperature to the specific edge type, optimizing bonding on different materials. For workshops with a variety of edges and significant production volumes, the 500 V-S justifies the price difference. For artisanal use with standard edges, the PEB 300 S is correctly sized. Above both in the Bernardo range are stationary edgebanders for serial production.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). The kit is shipped in 3 separate transport cases plus a support trolley: easy handling by one person. Glue pellets, edges, spare edgebanders, and original Bernardo accessories available from stock with 3-5 working days shipping. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the PEB 300 S for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eProfessional kit sized for continuous use. For occasional applications on panels (1-2 per month) the cost is oversized: consider pre-glued edges with an iron.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArtisan joinery \/ furniture factory\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eComplete solution for applying edges to shaped and curved panels that stationary edgebanders cannot handle. Independence from purchasing pre-glued edges reduces operating costs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom kitchens \/ furniture production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor panels with curvatures and minimum radii of 25 mm (impossible on stationary edgebanders). Kit includes all tools for a complete cycle: gluing + trimming + finishing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e serial production of standard straight panels at high frequency (consider automatic stationary edgebanders); applications with edges below 0.3 mm or above 3 mm thick (design limits); internal radii less than 25 mm (the edging head cannot access them).\u003c\/p\u003e\n\n\u003ch3\u003eEdging capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePVC\/ABS edge thickness\u003c\/td\u003e\n\u003ctd\u003e0.3 – 3.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdge height (min – max)\u003c\/td\u003e\n\u003ctd\u003e10 – 65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum workable internal radius\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible materials\u003c\/td\u003e\n\u003ctd\u003eABS, PVC, melamine, veneer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eGlue system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating time\u003c\/td\u003e\n\u003ctd\u003e4 min (at 120°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e120 – 200 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlue pot capacity\u003c\/td\u003e\n\u003ctd\u003e400 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication type\u003c\/td\u003e\n\u003ctd\u003eDirect on the edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpeed and motor\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e4 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e855 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230V – 50Hz – single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions\u003c\/td\u003e\n\u003ctd\u003e340 × 300 × 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdgebander weight\u003c\/td\u003e\n\u003ctd\u003e8.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBernardo PEB 300 S edgebander\u003c\/li\u003e\n\u003cli\u003eKG 60 Duo double edge trimmer\u003c\/li\u003e\n\u003cli\u003e0.8 kg glue pellets\u003c\/li\u003e\n\u003cli\u003eVH 03 vacuum clamping set\u003c\/li\u003e\n\u003cli\u003eKF 80 electric edge milling machine\u003c\/li\u003e\n\u003cli\u003e3 transport cases\u003c\/li\u003e\n\u003cli\u003eSupport trolley\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I apply edges to curved and shaped panels?\u003c\/summary\u003e\n\u003cp\u003eYes, up to a minimum internal radius of 25 mm. This is the most significant practical difference compared to stationary edgebanders, which only work with straight panels.\u003c\/p\u003e\n\u003cp\u003eThe ability to work with shaped panels is what makes the portable edgebander indispensable for certain processes: kitchens with rounded corners, shaped furniture, installations with curves. The 25 mm internal radius limit covers the vast majority of standard curvatures in furniture. For panels with radii under 25 mm, the edge must be applied using other techniques (e.g., manually with hot melt glue).\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much glue pellets are needed per meter of edge?\u003c\/summary\u003e\n\u003cp\u003eTypically 5-8 grams of pellets per linear meter of edge, depending on the thickness of the applied edge. A 400 ml pot (approximately 250 g of pellets) covers 30-50 meters of edgebanding.\u003c\/p\u003e\n\u003cp\u003eConsumption varies with application speed, edge thickness, and set temperature. For continuous use, it is recommended to keep a stock of original Bernardo pellets. Original replacement pellets are available from stock with 3-5 working days shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the average time to apply an edge to a kitchen door?\u003c\/summary\u003e\n\u003cp\u003eFor a standard kitchen door (perimeter approximately 2 meters), the complete cycle (gluing + trimming + finishing with KF 80) takes 5-8 minutes, after the initial 4 minutes of heating.\u003c\/p\u003e\n\u003cp\u003eOnce the machine is at temperature, the cycle is continuous: the edge is applied along the sides, trimmed with the KG 60 Duo, and finished with the KF 80. The initial 4-minute heating is a one-time cost; for producing multiple consecutive pieces, the flow becomes very fast. For serial production of doors, consider the PEB 500 V-S with variable speed to optimize the flow.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes the machine also work well on solid wood veneered edges?\u003c\/summary\u003e\n\u003cp\u003eYes. Natural veneer is one of the standard supported materials. The adjustable guiding system handles typical veneer tolerances without problems.\u003c\/p\u003e\n\u003cp\u003eNatural veneers (oak, walnut, cherry) require the correct working temperature (typically 160-180°C, adjustable on the PEB 300 S at two levels: 120 and 180-200°C) to ensure durable bonding without burning the wood. For high-quality veneers or difficult woods, the fine temperature adjustment available on the PEB 500 V-S can make a difference.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use pre-glued edges instead of applying glue?\u003c\/summary\u003e\n\u003cp\u003eTechnically yes, but it reduces the versatility of the machine and is not the optimal way to use it. The main advantage of the PEB 300 S is to eliminate dependence on pre-glued edges.\u003c\/p\u003e\n\u003cp\u003ePre-glued edges are more expensive (15-30% more) and available in a limited color range. With the PEB 300 S, you purchase standard unglued PVC\/ABS or veneer edges, chosen from a much wider range. The original Bernardo glue pellets applied by the machine have excellent yield and durability equivalent to or superior to industrial pre-glued edges.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50693029527880,"sku":"14-2002","price":1691.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_PEB_300_S_kit_bordatrice_portatile_professionale.jpg?v=1773845679","url":"https:\/\/www.krollit.com\/products\/machines-mobili-for-lincollaggio-of-bordi-peb-300-s","provider":"Krollit","version":"1.0","type":"link"}