{"product_id":"paranco-a-leva-manuale-gude-hs-2000","title":"Güde HS-2000 Manual Lever Hoist","description":"\u003cp\u003e\u003cstrong\u003eGüde HS-2000 Manual Lever Hoist – 2000 kg, 4.5 mm cable, 2.8 m\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lever hoist does not perform vertical lifting. It is a pulling and tensioning tool, designed for operations where controlled manual force is prioritized over speed. The lever-cam mechanism allows manual effort to be amplified up to 2000 kg with a short stroke (1.3 m with a pulley block).\u003c\/p\u003e\n\u003cp\u003eIt differs from chain and gear hoists because it does not lift or lower itself under load: the cable always remains controlled by the operator via the lever mechanism. Perfect for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTensioning fence wires without slippage\u003c\/li\u003e\n\u003cli\u003eExtracting stuck vehicles with progressive control\u003c\/li\u003e\n\u003cli\u003eTensioning cables on construction sites or in fixed installations\u003c\/li\u003e\n\u003cli\u003eRecovering loads in confined spaces where a chain cannot fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho chooses it in Italy\u003c\/h3\u003e\n\u003cp\u003eThree specific profiles choose the Güde HS-2000 manual lever hoist:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFarmers and rural managers\u003c\/strong\u003e – In farms with large-area fences, the need to tension wire or netting is recurrent. The manual lever ensures tension control: the cable is not attached once and forgotten, but the effort is adjusted as it is pulled. Low cost, no power needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTyre fitters and repair shops\u003c\/strong\u003e – When a car is stuck or blocked, the lever hoist allows for extraction in gradual increments. Unlike a chain that stops all-or-nothing, here you guide the progression of the pull. Low weight (2.87 kg), transportable in the van along with other tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstructors and repairers of fixed installations\u003c\/strong\u003e – Metal structures, gates. The manual lever is precise and requires no maintenance. No motor, no fluids, no wear from repeated cycles. Long-term reliability in difficult environments (construction sites, installations exposed to humidity).\u003c\/p\u003e\n\u003ch3\u003eAfter-sales support and accessory compatibility\u003c\/h3\u003e\n\u003cp\u003eKrollit supplies original Güde spare parts for the HS-2000 model with an average lead time of 5-7 working days:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement safety hook (with coupling, certified for 2000 kg)\u003c\/li\u003e\n\u003cli\u003eReplaceable steel cable (2.8 m length, Ø4.5 mm, welded and tested)\u003c\/li\u003e\n\u003cli\u003ePulley block (for rope extension with 1:1 ratio)\u003c\/li\u003e\n\u003cli\u003eManual in Italian and technical data sheet available in PDF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWho is the HS-2000 manual lever hoist suitable for?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eSuitable?\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdvanced hobbyist \/ garage\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eIdeal for extracting stuck vehicles and maintaining structures. Low weight (2.87 kg), easily portable. Low price, no maintenance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall farm or construction site (1-5 operators)\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e2000 kg capacity covers most jobs, and manual lever control reduces damage from excessive tensioning.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous industrial or mining production\u003c\/td\u003e\n\u003ctd\u003eNot indicated\u003c\/td\u003e\n\u003ctd\u003eMaximum capacity is 2000 kg and stroke is limited (2.8 m). For repeated cycles and higher loads, choose chain or electric hoists with higher speed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eNot indicated for:\u003c\/strong\u003e Vertical lifting (the lever hoist is not designed for vertical mounting); repeated work cycles exceeding 20-30 per day (operator fatigue); environments requiring SIL 2+ safety (manual mechanics do not integrate overload sensors).\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ch3\u003eCapacity and mechanism\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum pulling capacity\u003c\/th\u003e\n\u003cth\u003e2000 kg\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanism type\u003c\/td\u003e\n\u003ctd\u003eLever-cam with double secure ratchet \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle lever stroke\u003c\/td\u003e\n\u003ctd\u003eNot declared by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pulling length (without pulley block)\u003c\/td\u003e\n\u003ctd\u003e2.8 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulling length (with pulley block)\u003c\/td\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eCable and hook\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCable material\u003c\/th\u003e\n\u003cth\u003eGalvanized steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable diameter\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad hook type\u003c\/td\u003e\n\u003ctd\u003e1 safety hook with coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHook rotation\u003c\/td\u003e\n\u003ctd\u003eNot declared; fixed screw coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHook cert.\u003c\/td\u003e\n\u003ctd\u003eCertified for nominal load 2000 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eLocking mechanism\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking type\u003c\/th\u003e\n\u003cth\u003eDouble mechanical ratchet with coupling (maintenance-free)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad release\u003c\/td\u003e\n\u003ctd\u003eManual via lever (no fixed weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-slippage safety device\u003c\/td\u003e\n\u003ctd\u003eIntegrated into the cam mechanism\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eStructure and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBody material\u003c\/th\u003e\n\u003cth\u003eGalvanized steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnti-corrosion galvanization\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandle\u003c\/td\u003e\n\u003ctd\u003eRubberized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulley block \u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eLength × Depth × Height\u003c\/th\u003e\n\u003cth\u003e575 × 75 × 220 mm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e2.87 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGross weight (with packaging)\u003c\/td\u003e\n\u003ctd\u003e3.17 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n\u003cbr\u003eStandard equipment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHS-2000 lever hoist complete\u003c\/li\u003e\n\u003cli\u003eGalvanized steel cable Ø4.5 mm, length 2.8 m\u003c\/li\u003e\n\u003cli\u003eSafety hook with coupling\u003c\/li\u003e\n\u003cli\u003ePulley block\u003c\/li\u003e\n\u003cli\u003eRubberized handle\u003c\/li\u003e\n\u003cli\u003eManual in German\u003c\/li\u003e\n\u003cli\u003eTechnical data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between a lever hoist and a chain hoist?\u003c\/h3\u003e\n\u003cp\u003eThe lever hoist pulls and tensions with progressive manual control: the force is amplified by the lever mechanism, not by a reduction system. The chain, on the other hand, winds the load and lifting is continuous once initiated. The lever is for horizontal and controlled pulling; the chain is for rapid vertical lifting.\u003c\/p\u003e\n\u003cp\u003eSpecifically:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHS-2000 lever: max 2000 kg, 2.8 m pull, zero risk of unintentional slippage\u003c\/li\u003e\n\u003cli\u003eChain (e.g., GSZ 500\/1000): max 500-1000 kg, 6-12 m lift, automatic after initiation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan I use the HS-2000 hoist to lift a load vertically?\u003c\/h3\u003e\n\u003cp\u003eNo. The lever hoist is not designed for vertical lifting. The internal structure and components (hook, ratchet) are optimized for horizontal or inclined pulling. For vertical lifting, choose a chain or gear hoist certified for vertical mounting.\u003c\/p\u003e\n\u003cp\u003eIf you need to lift 2000 kg vertically, contact Krollit for chain hoist options with equivalent capacity.\u003c\/p\u003e\n\u003ch3\u003eHow much manual effort is required to pull 2000 kg?\u003c\/h3\u003e\n\u003cp\u003eNot declared by the manufacturer. The lever mechanism reduces effort based on the amplification ratio (typically 4:1 or 5:1 in Güde lever hoists). For a 2000 kg load with a 5:1 ratio, the manual effort is approximately 400 kg-force. However, the operator does not have to apply all the effort simultaneously: the lever stroke allows the pull to be distributed over multiple passes.\u003c\/p\u003e\n\u003ch3\u003eIs regular maintenance required?\u003c\/h3\u003e\n\u003cp\u003eMinimal. The mechanical ratchet is self-locking and requires no lubrication. Recommended:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the cable after use in dusty environments (to prevent premature wear)\u003c\/li\u003e\n\u003cli\u003eInspect the hook every 6 months (for micro-cracks, although rare)\u003c\/li\u003e\n\u003cli\u003eCheck the integrity of the galvanization if exposed to rain or salt spray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo oil changes, no filters. Declared service life over 10 years in normal use.\u003c\/p\u003e\n\u003ch3\u003eIs the HS-2000 hoist portable and transportable?\u003c\/h3\u003e\n\u003cp\u003eYes. Net weight 2.87 kg, dimensions 575 × 75 × 220 mm. It fits easily in a construction backpack or the van's tool carrier. Ideal for operators who move between construction sites or farms with large areas.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the HS-2000 model and larger versions (e.g., HS-3000)?\u003c\/h3\u003e\n\u003cp\u003eThe HS-2000 model is the most common in Italy for its compactness and weight. Larger versions (HS-3000 at 3 tonnes, HS-5000 at 5 tonnes) increase capacity and bulk, while maintaining the identical lever mechanism. For most uses in agriculture, light construction, and workshops, the HS-2000 is sufficient. It gains portability.\u003c\/p\u003e\n\u003ch3\u003eHow long does the cable last before visible wear?\u003c\/h3\u003e\n\u003cp\u003eNot declared by the manufacturer. Made of galvanized steel, the cable has a lifespan of 5-7 years in ordinary use (pulling 5-10 times a month). If exposed to aggressive conditions (salt spray, permanent wetness), replacement is recommended every 3-4 years. Krollit replacement cable available by order.\u003c\/p\u003e\n\u003ch3\u003eIs the HS-2000 hoist suitable for tensioning fence wires without damaging them?\u003c\/h3\u003e\n\u003cp\u003eYes, specifically. The lever allows you to dose the tension and stop when the wire reaches the desired tension. \u003c\/p\u003e","brand":"Guede","offers":[{"title":"Default Title","offer_id":53041261216072,"sku":"38350","price":20.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Paranco_a_leva_manuale_G_de_HS-2000_2000_kg.jpg?v=1777985422","url":"https:\/\/www.krollit.com\/products\/manual-lever-hoist-gude-hs-2000","provider":"Krollit","version":"1.0","type":"link"}